Electrical, Electronic Industries and Power Projects

Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in 2015 according to a study by Frost & Sullivan. During the period, consumption of electrical equipment is estimated to increase from over USD 28 billion now to USD 363 billion, growing at a CAGR of about 30%. It is also expected that during 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production.

The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. The equipments and accessories under these segments include motors, turbines, generators, switchgears, transformers, circuit breakers, induction motors, power capacitors, meters, transmission towers. Besides these, the spectrum covers a whole range of power cables including XLPE and AAC and ACSR conductors and electrical consumer products like fans, electric lamps, exhausts and domestic appliances and accessories. Inverters, gensets, UP also fall under its domain.

The electrical industry has been showing signs of recovery after poor performance in the recent years. The domestic electrical industry, which includes equipment for generation, transmission, distribution and use of power in industrial units, constitutes a major part of the electrical products.

The growth of the industry is directly related to the development of power generation and distribution. India's generation capacity of 2,300 MW in 1950 expanded to over 116,500 MW including non-utilities at the end 2000-01. The total installed capacity of electric power generation further increased to 141,080 MW in 2007-08 (upto January 2008) compared to a capacity of 128,000 MW during the same period in 2006-07. The Eleventh Plan has targeted a capacity addition of 78,570 MW.

The five years (2007-2012) may be the best of times for power equipment makers with the power sector on an expansion spree. With order-book growth expanding over the last three years, there is a good chance that this will continue. Close to 82% of the planned generation capacity for the Tenth Plan was either implemented or was in the process of being implemented. Even assuming a 70% implementation ratio for the Eleventh Plan, close to 55,000 MW will be added. Five ultra mega power projects, totaling 20,000 MW are coming up in 2008. In the transmission sector, for example, Power Grid Corporation is planning a capex of Rs 710 billion by 2010.

Earlier, the shortfalls in achieving the Plan targets of addition to power generation and up-gradation of transmission and distribution had adversely affected the electrical equipment industry. The peak shortage which was over 11% of the requirement in 2003-04 increased to 11.7% in 2004-05 and to over 12% in 2005-06. The shortage further rose to about 14% in 2006-07. In the ten months of 2007-08 the peak shortage had risen to over 15% of the peak demand of 107,010 MW.

Major players in electrical equipment segment are ABB, BHEL, BHEL Power Solutions, Havell's India, Kirloskar Electric, Crompton Greaves and Suzlon Energy.

According to the Power Ministry, the power sector has tied up Rs 2,240 billion worth of investments to build power plants with 70,000 MW capacities in the next three years.

With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active.

 

 

Reasons for buying our reports:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

This report provides vital information on the product like its characteristics and segmentation

This report helps you market and place the product correctly by identifying the target customer group of the product 

This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

The report provides a glimpse of government regulations applicable on the industry

The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

We use reliable sources of information and databases. And information from such sources is processed by us and included in the report

 

 

Electrical, Electronic Industries and Power Projects

Please choose a project below related to this category.

Electronic Digital Weighing Machine -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Electronic Digital Weighing Machine -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Automatic production in industry has brought increasing need for high speed weighing information for election or control should be available at a rate...

Capacity :

50 Nos./Day

Plant and Machinery cost:

6 Lakhs

Working Capital :

-

Rate of Return (ROR):

55.00

Break Even Point (BEP):

32.00

TCI :

147 Lakhs

Cost of Project :

0

Printed Circuit Board - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Printed Circuit Board - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Printed circuit board (PCB) are metal clad laminates that are used to define wiring scheme for an electronic circuit. It consists of an insulating lam...

Capacity :

14.00 Sq.M./Day

Plant and Machinery cost:

Rs. 7 Lacs

Working Capital :

Rs. 12 Lacs

Rate of Return (ROR):

38.07

Break Even Point (BEP):

53.16

TCI :

Rs. 36 Lacs

Cost of Project :

0

Immersion Heater - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout
Immersion Heater - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The immersion heater is very popular electric device used for domestic as well as industrial purposes. In industry it is used for spattering & to conc...

Capacity :

200 Nos./Day

Plant and Machinery cost:

Rs. 2 Lakhs

Working Capital :

Rs. 28 Lakhs

Rate of Return (ROR):

75.00

Break Even Point (BEP):

39.00

TCI :

Rs. 36 Lakhs

Cost of Project :

0

Rosin Cored Soft Soldering Wire - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue
Rosin Cored Soft Soldering Wire - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

Soldering is a process of joining solid components by introduction between them a molten alloy (solder) having a lower melting poing than that of the...

Capacity :

500 Kg Soldering Wire/Day

Plant and Machinery cost:

Rs. 38.40 Lacs

Working Capital :

Rs. 86.65 Lacs

Rate of Return (ROR):

1.00

Break Even Point (BEP):

0.00

TCI :

Rs. 35.70 Lacs

Cost of Project :

0

Wind Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
Wind Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Non-conventional and renewable sources of energy have come to assume tremendous significance both as alternative or substitute and also as viable supp...

Capacity :

30 Nos./Day

Plant and Machinery cost:

Rs. 17 Lakhs

Working Capital :

Rs. 86 Lakhs

Rate of Return (ROR):

52.70

Break Even Point (BEP):

40.81

TCI :

Rs. 137.0 Lakhs

Cost of Project :

0

Microwave Oven - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic
Microwave Oven - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Microwave ovens are the latest addition to the range of electronic consumer products. These ovens are used to cook, roast, steam, thaw, stew, bake, re...

Capacity :

25 Nos/Day

Plant and Machinery cost:

Rs. 16.0 Lakhs

Working Capital :

Rs. 48 Lakhs

Rate of Return (ROR):

70.52

Break Even Point (BEP):

37.72

TCI :

Rs. 85 Lakhs

Cost of Project :

0

Multilayer Printed Circuit Boards - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Multilayer Printed Circuit Boards - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Printed circuits are components in almost all electronic assemblies. Printed circuit board are metal clad laminates that are used to define wiring sch...

Capacity :

60.0 Sq. mts./Day

Plant and Machinery cost:

Rs. 75 Lakhs

Working Capital :

Rs. 40.0 Lakhs

Rate of Return (ROR):

50.30

Break Even Point (BEP):

43.89

TCI :

Rs. 144 Lakhs

Cost of Project :

0

Dry Cell - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
Dry Cell - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

A dry cell battery is a device, which converse chemical energy into electrical energy based on size. The growth of pencil-size battery is enormous in...

Capacity :

400 Nos/Day

Plant and Machinery cost:

Rs. 4 Lakhs

Working Capital :

Rs. 10 Lakhs

Rate of Return (ROR):

45.12

Break Even Point (BEP):

50.39

TCI :

Rs. 21 Lakhs

Cost of Project :

0

Alternator - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
Alternator - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The electrical machine which generates alternating currents, is known as A.C. generator or alternator. It consists of two parts essentially, magnet sy...

Capacity :

240 Alternators/Annum

Plant and Machinery cost:

Rs. 4 Lakhs

Working Capital :

Rs. 9 Lakhs

Rate of Return (ROR):

26.70

Break Even Point (BEP):

62.33

TCI :

Rs. 30 Lakhs

Cost of Project :

0

Voltage Stabilizer using IC Timer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Voltage Stabilizer using IC Timer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Stabilizer are widely used to provide stabilized voltage to various items like Regrigerator, Television, Typewriter, and for various household purpose...

Capacity :

60 Nos./Day

Plant and Machinery cost:

Rs. 4 Lacs

Working Capital :

Rs. 9 Lacs

Rate of Return (ROR):

64.82

Break Even Point (BEP):

40.62

TCI :

Rs. 21 Lacs

Cost of Project :

0

Make An Appointment

Talk to Our Experts Today!

appoinment
Call Us WhatsApp