Since such an era of industrial tradition revealed a mix of all the necessary for a winning industry— a base of production, natural resources, a low-cost trained workforce, and subsequent access to infrastructure development. A specifically chosen policy for diversifying industry and not to take as far as sustainable mining, agro-based industries, and renewable power revealed the following outcome. This, along with establishing logistic parks for entity transportation, an interval policy established the most effective value and efficacy of industry. Such a new tendency in industry is so modern that giant fields included an intention in advancing their line— manufacturing, metallurgy, food processing, the fields of textile and information technology and clean technology.
One, minerals and metals. The mineral deposits of Jharkhand make steel, cement, refractory, and metal fabrication industries feasible. In addition, the state has extensive coal reserves, and further holds iron-ore, bauxite, copper and the potential for value-added metallurgy, alloy and downstream industries.
Two, agriculture and forestry. The reputation of the state’s soil as being fertile along with the sufficient availability of water allows producing pulses, maize, vegetables, lac, and medicinal plants. A few possibilities also exist for Jharkhand in food processing, organic farming, and herbal product manufacturing. And three, energy and water resources. Jharkhand generates more than 4,000 MW of electricity and holds considerable potential in hydel, solar, and biomass. The power-intensive industries also benefit from the availability and relatively low prices of electricity.
The Jharkhand Government issued exhaustive Fiscal and Non-Fiscal incentives:
- Capital Investment Subsidy: 25-35% of fixed capital investment.
- Power Tariff Rebate: Rs1.00 per unit for 5 years.
- SGST Reimbursement: 100% for 7-10 years.
- Interest Subsidy: 6% on Term Loans for 5 years.
- Stamp Duty Exemption: 100% for land purchase/lease for industries.
- Employment Subsidy: Rs5000 p/m for local employees for 5 years.
- Transport Subsidy: 50% freight rebate for inter-state exports..
- Women/ST/SC Entrepreneurs and MSME Entrepreneurs: MSDP 5-10% of capital subsidy.
The combination of minerals, manpower, and manufacturing facilitated Jharkhand state with immense business potential and resulted in it hosting a unique mix of these factors. The state boasts well-established industrial infrastructure, progressive policies, and enormous natural resources, making it one of Eastern India’s most lucrative investment destinations. Potential for profitable, sustainable business ventures includes:
- Steel & Metal Industries
- Agro and Food Processing
- Textiles & Handicrafts
- Renewable Energy
- Tourism and IT Services
Given the high returns, geographical advantages, and various governmental benefits, Jharkhand is undoubtedly among the top prospects for making India’s nationwide headway in business development and industrial entrepreneurship.
Please choose a project below related to this category.
Manufacturing of masalas basically can be in tiny scale and at the most may be in small scale. Spices and spice derivatives are predominantly used in...
|
Capacity : 600 kgs./Day |
Plant and Machinery cost: Rs. 11 Lacs |
|
Working Capital : Rs. 18 Lacs |
Rate of Return (ROR): 46.73 |
|
Break Even Point (BEP): 44.64 |
TCI : Rs. 41 Lacs |
|
Cost of Project : 0 |
Curry powder is a well known name among the Indian people. Curry powder is the combination of finely powdered spices. For each dish there is different...
|
Capacity : 550.0 Kgs./Day |
Plant and Machinery cost: Rs. 2 Lakhs |
|
Working Capital : Rs. 18 Lakhs |
Rate of Return (ROR): 52.15 |
|
Break Even Point (BEP): 41.38 |
TCI : Rs. 29 Lakhs |
|
Cost of Project : 0 |
Atta is one of the staple and basic food to Indians not only that it is basic food ingredients for all the men lives in the world. Atta is manufacture...
|
Capacity : 100 MT/Day |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 0.01 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Potato is widely consumed as food all over the world. Potato chips are basically used for snacks purposes. They are produced by rapid dehydration of p...
|
Capacity : 2000 Kgs/Day |
Plant and Machinery cost: Rs. 137 Lakhs |
|
Working Capital : Rs. 91 Lakhs |
Rate of Return (ROR): 39.21 |
|
Break Even Point (BEP): 40.17 |
TCI : Rs. 271 Lakhs |
|
Cost of Project : 0 |
Soyabean meat is a vegetable meat which has property like original meat. Soyabean is abundantly produced in Madhya Pradesh. Production of soyabean is...
|
Capacity : 2 MT/Day |
Plant and Machinery cost: Rs. 17 Lakhs |
|
Working Capital : Rs. 41 Lakhs |
Rate of Return (ROR): 24.60 |
|
Break Even Point (BEP): 0.00 |
TCI : Rs. 103 Lakhs |
|
Cost of Project : 0 |
Mango is one of the best fruits in India. There are number of products produced from mango like mango juice, mango pulp, mango flavour, mango kernel o...
|
Capacity : 1000 Kgs/Day |
Plant and Machinery cost: Rs. 16 Lakhs |
|
Working Capital : Rs. 28 Lakhs |
Rate of Return (ROR): 30.54 |
|
Break Even Point (BEP): 56.27 |
TCI : Rs. 72 Lakhs |
|
Cost of Project : 0 |
Fruit concentrate is the product of fruit juice or fruit pulp in dry form or dry powder form mixed with sugar, natural flavour or synthetic permitted...
|
Capacity : 2 MT/Day |
Plant and Machinery cost: Rs. 96 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 12.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Rs. 120 Lakhs |
|
Cost of Project : 0 |
Mango is one of the best fruits in India. Mango bar can be prepared from green mango, ripe mango and mango juice. Mango currently accounted 39% of the...
|
Capacity : 200 Kgs/Day |
Plant and Machinery cost: Rs. 22 Lakhs |
|
Working Capital : Rs. 22 Lakhs |
Rate of Return (ROR): 26.43 |
|
Break Even Point (BEP): 59.88 |
TCI : Rs. 95 Lakhs |
|
Cost of Project : 0 |
It is one of bakery products largely used by the cake manufacturer. Basic raw materials are vegetable oil, G.M.S., Xanthenes gum, Satiric Acid etc. It...
|
Capacity : 500 Kgs Cake Gel/Day |
Plant and Machinery cost: Rs. 6 Lakhs |
|
Working Capital : Rs. 48 Lakhs |
Rate of Return (ROR): 55.00 |
|
Break Even Point (BEP): 40.00 |
TCI : Rs. 30 Lakhs |
|
Cost of Project : 0 |
There are few food items are largely used as diabetic food. There is no ill effect produce by taking of this food by the diabetic patient. It is now m...
|
Capacity : 1 MT Diabetic Food/Day |
Plant and Machinery cost: Rs. 20 Lakhs |
|
Working Capital : Rs. 85 Lakhs |
Rate of Return (ROR): 35.40 |
|
Break Even Point (BEP): 45.00 |
TCI : Rs. 35 Lakhs |
|
Cost of Project : 0 |
There are different kinds of fasteners available in the mechanical workshop. Fasteners can be made by batch manual process and also by computerized au...
|
Capacity : 2.00 MT /Day |
Plant and Machinery cost: Rs. 22.00 Lakhs |
|
Working Capital : Rs. 372 Lakhs |
Rate of Return (ROR): 57.00 |
|
Break Even Point (BEP): 23.00 |
TCI : Rs. 440 Lakhs |
|
Cost of Project : 0 |