Since such an era of industrial tradition revealed a mix of all the necessary for a winning industry— a base of production, natural resources, a low-cost trained workforce, and subsequent access to infrastructure development. A specifically chosen policy for diversifying industry and not to take as far as sustainable mining, agro-based industries, and renewable power revealed the following outcome. This, along with establishing logistic parks for entity transportation, an interval policy established the most effective value and efficacy of industry. Such a new tendency in industry is so modern that giant fields included an intention in advancing their line— manufacturing, metallurgy, food processing, the fields of textile and information technology and clean technology.
One, minerals and metals. The mineral deposits of Jharkhand make steel, cement, refractory, and metal fabrication industries feasible. In addition, the state has extensive coal reserves, and further holds iron-ore, bauxite, copper and the potential for value-added metallurgy, alloy and downstream industries.
Two, agriculture and forestry. The reputation of the state’s soil as being fertile along with the sufficient availability of water allows producing pulses, maize, vegetables, lac, and medicinal plants. A few possibilities also exist for Jharkhand in food processing, organic farming, and herbal product manufacturing. And three, energy and water resources. Jharkhand generates more than 4,000 MW of electricity and holds considerable potential in hydel, solar, and biomass. The power-intensive industries also benefit from the availability and relatively low prices of electricity.
The Jharkhand Government issued exhaustive Fiscal and Non-Fiscal incentives:
- Capital Investment Subsidy: 25-35% of fixed capital investment.
- Power Tariff Rebate: Rs1.00 per unit for 5 years.
- SGST Reimbursement: 100% for 7-10 years.
- Interest Subsidy: 6% on Term Loans for 5 years.
- Stamp Duty Exemption: 100% for land purchase/lease for industries.
- Employment Subsidy: Rs5000 p/m for local employees for 5 years.
- Transport Subsidy: 50% freight rebate for inter-state exports..
- Women/ST/SC Entrepreneurs and MSME Entrepreneurs: MSDP 5-10% of capital subsidy.
The combination of minerals, manpower, and manufacturing facilitated Jharkhand state with immense business potential and resulted in it hosting a unique mix of these factors. The state boasts well-established industrial infrastructure, progressive policies, and enormous natural resources, making it one of Eastern India’s most lucrative investment destinations. Potential for profitable, sustainable business ventures includes:
- Steel & Metal Industries
- Agro and Food Processing
- Textiles & Handicrafts
- Renewable Energy
- Tourism and IT Services
Given the high returns, geographical advantages, and various governmental benefits, Jharkhand is undoubtedly among the top prospects for making India’s nationwide headway in business development and industrial entrepreneurship.
Please choose a project below related to this category.
Chapati is well known basic food for all types of men and women in the society. It is used as food much more in India as well as through out the world...
|
Capacity : 14000.00 MT/Year |
Plant and Machinery cost: Rs. 28 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Rs. 93 Lakhs |
|
Cost of Project : 0 |
Turmeric (Curcuma longa) is native to Asia and India. The tuberous rhizomes or underground stems of turmeric are used from antiquity as condiments, a...
|
Capacity : 40.00 Kgs/Day |
Plant and Machinery cost: 105 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 40.00 |
TCI : 4 Crores |
|
Cost of Project : 0 |
India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. C...
|
Capacity : Cocon Production 250 Kgs./Day Silk Productions 150 Kgs./Day |
Plant and Machinery cost: Rs. 33 Lakhs |
|
Working Capital : Rs. 15 Lakhs |
Rate of Return (ROR): 19.33 |
|
Break Even Point (BEP): 55.40 |
TCI : Rs. 321 Lakhs |
|
Cost of Project : 0 |
India is the major producer of tamarind in the world. In the tropic zone, tamarind is used in many dishes or traditional drinks, but the commercial cu...
|
Capacity : 3200 Kgs./Day |
Plant and Machinery cost: Rs. 112 Lakhs |
|
Working Capital : Rs. 230 Lakhs |
Rate of Return (ROR): 31.52 |
|
Break Even Point (BEP): 53.09 |
TCI : Rs. 494 Lakhs |
|
Cost of Project : 0 |
Coal washing unit is one of the most important unit for upgradation of coal in sense of fed value by reducing of ash contents in the coal. It is basic...
|
Capacity : 11700 MT/Day |
Plant and Machinery cost: Rs. 3200 Lakhs |
|
Working Capital : Rs. 891 Lakhs |
Rate of Return (ROR): 6.36 |
|
Break Even Point (BEP): 0.00 |
TCI : Rs. 7241 Lakhs |
|
Cost of Project : 0 |
In India fruits & vegetables are produced in plenty. A large quantity of fruits & vegetables are exported to other countries & even in India itself th...
|
Capacity : 3000 MT Fruits 3000 MT Onions |
Plant and Machinery cost: Rs. 332 Lakhs |
|
Working Capital : Rs. 40 Lakhs |
Rate of Return (ROR): 37.89 |
|
Break Even Point (BEP): 45.32 |
TCI : Rs. 482 Lakhs |
|
Cost of Project : 0 |
Ginger is mentioned in the early literature of China and India as a spice. Thus it is one of the earliest of known spices. It is also used for medicin...
|
Capacity : 1000 Hectare /Day & 500 MT Storage Capacity |
Plant and Machinery cost: Rs. 60 Lakhs |
|
Working Capital : Rs. 26 Lakhs |
Rate of Return (ROR): 17.67 |
|
Break Even Point (BEP): 62.56 |
TCI : Rs. 281 Lakhs |
|
Cost of Project : 0 |
Enameled wire is an insulated wire used in winding of armatures in transformers, switch gears and other electrical equipments. When connected to the m...
|
Capacity : 500 Kgs/Day |
Plant and Machinery cost: Rs. 22 Lakhs |
|
Working Capital : Rs. 52.0 Lakhs |
Rate of Return (ROR): 37.43 |
|
Break Even Point (BEP): 46.95 |
TCI : Rs. 114 Lakhs |
|
Cost of Project : 0 |
Modern steels vary greatly in their compositions, mechanical properties and it may be assumed that nearly all steel is produced for the benefit of som...
|
Capacity : 200 MT/Day |
Plant and Machinery cost: Rs. 1160 Lakhs |
|
Working Capital : Rs. 1577 Lakhs |
Rate of Return (ROR): 94.00 |
|
Break Even Point (BEP): 40.00 |
TCI : Rs. 3255 Lakhs |
|
Cost of Project : 0 |
There required large amount of hot rolled or cold rolled coils and strips for manufacturing of steel tubes. One of the major use of this tube is for m...
|
Capacity : 400 Kgs /Day |
Plant and Machinery cost: Rs. 7 Lakhs |
|
Working Capital : Rs. 15 Lakhs |
Rate of Return (ROR): 45.54 |
|
Break Even Point (BEP): 47.81 |
TCI : Rs. 41 Lakhs |
|
Cost of Project : 0 |
To think of steel , first of all, a rod or a bar comes to the mind of a common man in India. Steel rods are required for making mostly everything of m...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
The importance of iron and steel among other materials is well known for industrialization and national economy. Basically all industries depend on ir...
|
Capacity : 1.67 MT/day |
Plant and Machinery cost: 47 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 23.86 |
|
Break Even Point (BEP): 59.82 |
TCI : 142 Lakhs |
|
Cost of Project : 0 |