The reasoning behind believing that very few but maybe all the firms operating in Kenya’s economy are large and competitive from a global viewpoint is shared by the authors. And here are the reasons given:
1. Strategic Location and Regional Market Access – Mombasa port and Nairobi, Kisumu air hubs are linking Uganda, Rwanda, South Sudan, parts of DR Congo, and other landlocked neighbors to global markets. EAC, COMESA membership, and AfCFTA preferential access are facilitating regional exports.
2. Young, Mobile, and Skilled Workforce – a young, steadily demographically expanding population with greater than world-leading mobile penetration and fast-improving tertiary-education outputs in engineering, business, ICT, etc. suited for tech, manufacturing, and service industries thus is in abundance.
3. Strong Digital & Innovation Ecosystem – Nairobi is a worldwide hotspot for mobile money e.g., M-Pesa, and renowned Fintech and AgriTech innovations Silicon Savannah. Incubators, accelerators, sector-specific innovation Hubs, and unceasing VC flows are rendering scaling tech startups feasible.
4. Improving Infrastructure – there has been vast investment in roads, rail (SGR, for example), ports, and airport upgrades, as well as geothermal plants and increasing renewable energy generation, so causing considerably lesser logistical and power-supply-related issues for industry than commonly imagined.
5. Policy Support & Investment Facilitation – the KIA — Kenya Investment Authority and numerous county-level investment promotion agencies are creating investment incentives, single-window facilitation, and industry-targeted investment assistance to strategic sectors.
Entrepreneurs can focus on sectors that match Kenya’s comparative advantages and national priorities:
1. Agro-processing and Cold Chain Logistics- This focus area involves tea, coffee, fruits, and vegetables, as well as dairy and meat products, juice, canned and edible oils, and frozen seafood with a view to meeting both domestic consumption needs and expanding to the EU and the Middle East.
2. Horticulture & Floriculture Processing- As for tea, covering, coffee, and pulses, already established world-class flower exports benefitting from horticultural post-harvest technology, grading, packaging and air freight enabled value chains establishes Kenya as an excellent choice globally.
3. Renewables & Distributed Energy- These target solar mini-grids, off-grid solar products, energy storage, and hybrid solutions that precisely respond to industry demands and rural electrification needs and include promising commercial opportunities.
4. Manufacturing & Light Industries for the future- Especially when focusing on food & beverage, textile (value added apparel), pharmaceuticals (formulations, packaging), building materials (cement, prefabs), and automotive components, it is facilitated by logistics competitive growth.
5. ICT, Fintech & E-services- That leverages Fintech, mobile payments, InsurTech, AgriTech, e-health and SaaS platforms, and targets both SMEs and larger-scale enterprises underpinned by high digital uptake in Kenya.
KenInvest, the Kenyan government and county administrations provide:
Kenya has all that it takes to be one of Africa’s top destinations for entrepreneurs and investors including but not limited to strategic geography, digital leadership, rich agricultural endowments, improving infrastructures and supportive policy frameworks. The priority opportunities are agro-processing, cold chain logistics, renewable energy, manufacturing, fintech, and tourism, which can all scale to regional markets within the AfCFTA and EAC frameworks.
Please choose a project below related to this category.
Artemisia Vulgaris plants seem to have originated in Eastern Europe and Western Asia. Most of these species are found growing wild and abundantly all...
|
Capacity : 1500 Kg. / Annum |
Plant and Machinery cost: 39 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project : 146 Lakhs |
|
Cost of Project : 0 |
Ginger is the most important and one of the oldest spices used in every kinds of food preparation. It is one of the agro-based products, which has go...
|
Capacity : 600 MT /Annum Ginger Paste,75 MT / Annum Ginger Powder,6000 Ltrs. / Annum Ginger Oil |
Plant and Machinery cost: 85 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 42.00 |
|
Break Even Point (BEP): 63.00 |
TCI : Cost of Project : 232 Lakh |
|
Cost of Project : 0 |
Soft and hard boards, which are the most basic among paper boards, are used for a wide range of purposes including folding boxes, back board for flat...
|
Capacity : 5.00 Ton / Day |
Plant and Machinery cost: 36 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 45.00 |
TCI : 3 Crores |
|
Cost of Project : 0 |
Kraft paper is paper produced by the Kraft process from wood pulp or waste or agriculture residue. It is strong and relatively coarse. Kraft paper is...
|
Capacity : 20 MT / Day |
Plant and Machinery cost: 604 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 35.00 |
|
Break Even Point (BEP): 48.00 |
TCI : 1169 Lakhs |
|
Cost of Project : 0 |
Co-generation plant based on Bagasse is the need of the hour in the perspective of the power generation required and its demand is increasing consider...
|
Capacity : 15 M W |
Plant and Machinery cost: 850 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 53.00 |
|
Break Even Point (BEP): 46.00 |
TCI : Cost of Project : 1746 Lakhs |
|
Cost of Project : 0 |
Co-generation plant based on Bagasse is the need of the hour in the perspective of the power generation required and its demand is increasing consider...
|
Capacity : 15 MW |
Plant and Machinery cost: 850 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 53.00 |
|
Break Even Point (BEP): 46.00 |
TCI : Cost of Project : 1746 Lakhs |
|
Cost of Project : 0 |
It goes without saying that soap is indispensable to our daily life. Accordingly, the manufacturing industry should continue to develop as one of the...
|
Capacity : 1000 Kgs. / Day |
Plant and Machinery cost: 13 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 46.00 |
|
Break Even Point (BEP): 37.00 |
TCI : 112 Lakhs |
|
Cost of Project : 0 |
Coconut is a small holder’s plantation crop grown in the humid tropics and tropical regions. India is a major producer of coconut in the world. Vir...
|
Capacity : 600 MT / Day |
Plant and Machinery cost: 66 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 35.00 |
|
Break Even Point (BEP): 56.00 |
TCI : Cost of Project : 153 Lakh |
|
Cost of Project : 0 |
Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirem...
|
Capacity : - |
Plant and Machinery cost: 147 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 47.00 |
TCI : Cost of Project : 426 Lakhs |
|
Cost of Project : 0 |
-
|
Capacity : 5000 Nos./Day |
Plant and Machinery cost: Rs. 71 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 56.00 |
|
Break Even Point (BEP): 32.00 |
TCI : Rs. 418 Lakhs |
|
Cost of Project : 0 |
-
|
Capacity : 12 Ton/Day |
Plant and Machinery cost: Rs. 31 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 51.00 |
|
Break Even Point (BEP): 36.00 |
TCI : Rs. 353 Lakhs |
|
Cost of Project : 0 |
-
|
Capacity : 30 MT / day |
Plant and Machinery cost: 509 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 59.00 |
TCI : 1135 Lakhs |
|
Cost of Project : 0 |