We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Rubber is a versatile product with multiple usages. It is grown in various countries worldwide and plays a crucial role in the Indian economy too. India is one of the leading rubber producers in the world.
The use of rubber is widespread, ranging from household to industrial products, entering the production stream at the intermediate stage or as final products. Tyre and tubes are the largest consumers of rubber. The remaining 44% is taken up by the general rubber goods sector, which includes all products, except tyres and tubes. Synthetic rubber is mainly used for the production of auto tyres and tubes, cycle tyres and tubes and footwear. Other applications for the synthetic variety are camel back, belts and hoses. The market segmentation includes Auto tyres and tubes 56%, Bicycle tyres and tubes 9%, Footwear 18%, Latex goods 8%, Belts and hoses 4%, Camelback 5%.
India, being the fourth largest producer of natural rubber in world, is considered to be one of the key players in the global rubber business. The entire requirement of rubber-based industries for natural rubber, synthetic rubber, rayon and nylon tyre cord, steel cord, carbon black and rubber chemicals, etc is being met from indigenous sources. Rapid progress has also been made in the production of natural rubber.
There are about 5000 units comprising 30 large-scale, 300 medium scale and around 4600 small-scale and tiny sector units. These units manufacture more than 35,000 rubber products.
The main producer of synthetic rubber in India has been Synthetics and Chemicals, Apar Industries, Apcotex Lattices and Unimers India. Synthetics and Chemicals had closed down.
The future for natural rubber looks bright. Ever increasing volumes are being produced. At 5.92 million tonnes per annum, natural rubber has 39 per cent of the world rubber consumption of 15.14 million tonne per annum. The rubber industry is expected to grow at over 8 per cent per annum this decade, as the per capita consumption of rubber is 0.8 kg against 14 kg in the developed world. India is likely to become the world's third-largest producer of natural rubber after Thailand and Indonesia, Rubber Board sources said. And with crude prices unlikely to come down, synthetic rubber is likely to remain a costly alternative. With accelerating demand from automobile industry and other rubber consuming industries in developing countries, the shortage of natural rubber is likely to aggravate in coming years. There exists a huge scope for expansion causing import of machinery, technology and raw materials and export of rubber goods.
Please choose a project below related to this category.
Natural rubber is a high molecular weight polymeric substance with viscoelastic properties. Structurally it is cis 1 4-polyisoprene. Isoprene is a die...
|
Capacity : 12 MT/Day |
Plant and Machinery cost: Rs.126 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 49.00 |
|
Break Even Point (BEP): 28.00 |
TCI : Rs. 2327 Lakhs |
|
Cost of Project : 0 |
Latex rubber thread is one of the product amongst various process obtained from Rubber Processing. It is produced by extruding compounded latex throu...
|
Capacity : 10 MT/ day |
Plant and Machinery cost: Rs.4400 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 33.00 |
|
Break Even Point (BEP): 44.00 |
TCI : Rs.6700 Lakhs |
|
Cost of Project : 0 |
Latex foam rubber derives its physical performance properties from the vulcanization process that creates long molecular chains with strong cross lin...
|
Capacity : 1 MT/ day |
Plant and Machinery cost: Rs.80 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 38.00 |
TCI : Rs.343 Lakhs |
|
Cost of Project : 0 |
A gasket (correct terminology is a joint made from jointing material) is a mechanical seal which fills the space between two or more mating surfaces,...
|
Capacity : 200 kgs/ day |
Plant and Machinery cost: Rs.29 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Rs.165 Lakhs |
|
Cost of Project : 0 |
The tyre industry is the largest part of the rubber manufacturing industry, infact it is so large that it is often classed as an industry in its own...
|
Capacity : 13475 Nos./ day |
Plant and Machinery cost: Rs.409 Lakhs |
|
Working Capital : |
Rate of Return (ROR): 56.00 |
|
Break Even Point (BEP): 20.00 |
TCI : Rs.17073 Lakhs |
|
Cost of Project : 0 |
Rubber toys are one of the cheaper and best substitutes of electronic toys, plastic toy and other type of toys. Two types of hollow rubber toys of va...
|
Capacity : 500 Pcs./ day |
Plant and Machinery cost: Rs.42 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 46.00 |
|
Break Even Point (BEP): 41.00 |
TCI : Rs.362 Lakhs |
|
Cost of Project : 0 |
A rubber mat is a generic term for a piece of flat rubber, generally placed on a floor or other flat surface, which serves a range of purposes includ...
|
Capacity : 2 MT/ day |
Plant and Machinery cost: Rs.27 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 48.00 |
|
Break Even Point (BEP): 34.00 |
TCI : Rs.389 Lakhs |
|
Cost of Project : 0 |
Compounding, a term that has evolved within the tire and rubber industry, is the materials science of modifying a rubber or elastomeric or a blend of...
|
Capacity : 32 MT/ day |
Plant and Machinery cost: Rs.52 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 53.00 |
|
Break Even Point (BEP): 22.00 |
TCI : Rs.3032 Lakhs |
|
Cost of Project : 0 |
Advances in tyre materials, tyre constructions and tyre manufacturing technology have led to new types of products and the development of new market s...
|
Capacity : 1600 Nos./ day |
Plant and Machinery cost: Rs.204 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 54.00 |
|
Break Even Point (BEP): 21.00 |
TCI : Rs.8174 Lakhs |
|
Cost of Project : 0 |
A tyre is an assembly of numerous components that are built up on a drum and then cured in a press under heat and pressure. Heat facilitates a polymer...
|
Capacity : 2000 Nos./ day |
Plant and Machinery cost: 1132 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 48.00 |
TCI : Cost of Project : 1908 Lakhs |
|
Cost of Project : 190800000 |
Ethylene propylene rubber (EPR) is an elastomer and has useful chemical and physical properties; it is resistant to heat, oxidation, ozone and the wea...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 0.01 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Butyl rubber is a synthetic rubber, a copolymer of isobutylene with isoprene. The abbreviation IIR stands for Isobutylene Isoprene Rubber. Polyisobuty...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 0.01 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2014-. All rights reserved.
