Just for Starters: Selected Projects to Start with 30,00,000 ( ) ( Best Seller ) ( ) ( ) ( )
Author NIIR Board of Consultants and Engineers ISBN 8178330229
Code ENI124 Format Paperback
Price: Rs 475   475 US$ 13   13
Pages: 364 Published 2004
Publisher Asia Pacific Business Press Inc.
Usually Ships within 5 Days

Everyone wants to do something that gives them chance to earn more money and it is possible by becoming an entrepreneur. Starting your own business is one of the few remaining paths to wealth. Entrepreneurship is one of the critical decisions to be made and it involves number of risk and has its own advantages also. But the charm of being a master of you is always above any other form of work. To start your own venture you have to decide on many things. Making a choice of the right project is a difficult decision for an entrepreneur and is an imperative decision. For the reason that rest of the challenges for setting up a business is based on the type of the product and fund to invest. To start a business of your own you need to understand the environment to set up an enterprise of you own. The small scale enterprise sector is a dynamic and vibrant segment of the Indian Economy. This sector is the nursery for the development of entrepreneurial talent and has grown into an important component of the production chain. In both developed and developing countries, the Government is turning to small and medium scale industries and entrepreneurs, as a means of economic development and a veritable means of solving problems. It is a seedbed of innovations, inventions and employment. You do not need to be a genius to run a successful small business, but you do need some help. And that is exactly what this book is, a guide into the stimulating world of small business ownership and management. 

 

Startup India Stand up

Our Prime Minister unveiled a 19-point action plan for start-up enterprises in India. Highlighting the importance of the Standup India Scheme, Hon’ble Prime minister said that the job seeker has to become a job creator. Prime Minister announced that the initiative envisages loans to at least two aspiring entrepreneurs from the Scheduled Castes, Scheduled Tribes, and Women categories. It was also announced that the loan shall be in the ten lakh to one crore rupee range. 

A startup India hub will be created as a single point of contact for the entire startup ecosystem to enable knowledge exchange and access to funding. Startup India campaign is based on an action plan aimed at promoting bank financing for start-up ventures to boost entrepreneurship and encourage startups with jobs creation. 

Startup India is a flagship initiative of the Government of India, intended to build a strong ecosystem for nurturing innovation and Startups in the country. This will drive sustainable economic growth and generate large scale employment opportunities. The Government, through this initiative aims to empower Startups to grow through innovation and design.

 

What is Startup India offering to the Entrepreneurs?

Stand up India backed up by Department of Financial Services (DFS) intents to bring up Women and SC/ST entrepreneurs. They have planned to support 2.5 lakh borrowers with Bank loans (with at least 2 borrowers in both the category per branch) which can be returned up to seven years.

PM announced that “There will be no income tax on startups’ profits for three years”

PM plans to reduce the involvement of state government in the startups so that entrepreneurs can enjoy freedom.

No tax would be charged on any startup up to three years from the day of its establishment once it has been approved by Incubator.

 

The major contents of this book are manufacturing of batting gloves, noodles, public address amplifiers, surgical dresses, wrought iron furniture, quality control and standards, market potential, present manufactures, textile screen printing, technical aspects etc.


This book gives an insight to the products to start with in order to become a part of this growing section of industries with their plant machinery, Raw material requirements as well as market and manufacturing details. 

1. BEE - HIVE METALLURGICAL COKE
Introduction
Market Potential
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Controls and Standards
Production Capacity 
Pollution Control
Environmental Pollution
Plant Economics

2. CRT DATA DISPLAY MONITOR (MONOCHROME)
Introduction
Market Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity
Environmental Pollution
Pollution Control
Energy Conservation
Plant Economics

3. CONTROL PANEL (FOR SINGLE PHASE SUBMERSIBLE PUMPSET)
Introduction
Market Potential
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Environmental Pollution 
Energy Conservation
Plant Economics

4. ELECTRIC FURNACE
Introduction
Market Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Pollution Control
Energy Conservation
Plant Economics

5. ELECTRIC TANDOOR
Introduction
Market Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Pollution Control
Energy Conservation
Plant Economics

6. FULL PVC FOOTWEAR
Introduction
Market Potential
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Pollution Measures
Plant Economics

7. GLASS MIRROR
Introduction
Market Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Protective Coating on Silvered Surface of the Mirror
Silvering Solution
Quality Control and Standards
Production Capacity
Pollution Control
Energy Conservation
Plant Economics

8. HOT CASES
Introduction
Market Potential
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Pollution Control
Energy Conservation
Plant Economics

9. MANUFACTURING OF BATTING GLOVES
Introduction
Market Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Production Capacity 
Pollution Measures
Energy Conservation
Plant Economics

10. NOODLES
Introduction
Material Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Process in Detail
Quality Control and Standards
Production Capacity
Pollution Measures
Energy Conservation
Plant Economics

11. PVC CABLES
Introduction
Material Potential
Present Manufacturers
Basis and presumptions
Implementation Schedule
Technical Aspects
Advantages of PVC Cables
Cable Range at a Glance
Production Capacity
Quality Control and Standards
Environmental Pollution 
Energy Conservation
Plant Economics

12. PORTFOLIO BAG
Introduction
Market Potential
Present Manufacturers
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Pollution Measures
Energy Conservation
Plant Economics

13. PUBLIC ADDRESS AMPLIFIERS
Introduction
Market Potential
Present Manufactures
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Signal Processing
Production Capacity 
Environmental Pollution 
Energy conservation
Financial Aspects
Plant Economics

14. RECTIFIER D.C.
Introduction
Market Potential
Present Manufacturers
Basis and presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity
Environmental Pollution
Energy Conservation
Plant Economics

15. SUGAR GLOBULES
Introduction
Market Potential
Implementation Schedule
Technical Aspects
Pollution Measures
Energy Conservation
Plant Economics

16. SURGICAL DRESSES (DOCTOR'S DRESS)
Introduction
Market Potential
Present Manufacturers
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity
Pollution Measures
Energy conservation
Plant Economics

17. TEXTILE SCREEN PRINTING
Introduction
Market Potential
Present Manufactures
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity 
Motive Power
Pollution Control
Energy Conservation
Plant Economics

18. TRUMOCK SHOE WITH TPR SOLE
Introduction
Market Potential
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and standards
Production Capacity 
Pollution Measures
Energy Conservation
Plant Economics

19. WHITE STAPLES PINS
Introduction
Market Potential
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity
Pollution Measures
Energy Conservation
Plant Economics

20. WROUGHT IRON FURNITURE
Introduction
Market Potential
Basis and Presumptions
Implementation Schedule
Technical Aspects
Quality Control and Standards
Production Capacity
Pollution Measures
Energy conservation
Plant Economics

DIRECTORY SECTION 

 

NOODLES

INTRODUCTION

Fresh noodle is an extrusion product made of tapioca flour and maida. They are long thread-like of thickness. This is a eatable food item under instant food products and very popular now-a-days as fast food. It is one of the most conventional foods available in the market.

Material Potential

Noodles and chowmein are ready-to-eat food item and is very popular in developed countries and now it has created good market potential in our country also and is becoming a popular item. The factors governing its demand are:

  1. Increasing population of the country.
  2. Rapid industrialization in the country.
  3. Increase in the purchasing capacity/power of the people.
  4. Durability of the product.
  5. Change in people eating habits especially the younger generation.
  6. It is ready-to-eat product.
  7. Convenience of preparation.

Keeping in view the above factors, the demand of this product is likely to increase manifold in the coming years.

Present Manufacturers

M/s. A.G. International

2222, Sector 21-C,

Chandigarh- 160021

Tel.: +91-172-2720181

Mobile No. 9814212222

Fax: +91-172-2728205

E-mail: agfoods@hotmail.com.

 

M/s. Bombino Agro Industries Ltd.

4E, Surya Towers, 4th floor,

E Block Sardar Patel Road,

Secunderabad-500003.

Tel.: +91-40-27816611

Fax: +91-40-27816615

E-mail: ho.marketing@bambino.com

Web: http://www.bombino.com.

 

M/s. Magic foods Limited

Magic House,

D-3/1, R.P. Bagh.

Delhi-110007

Tel.: 27111629, 27129583

Fax: 91-11-27249497

 

M/s. Moonrich Foods Pvt. Ltd.

RH IV/L-5, Sector-9,

C.B.D. Belapur,

Navi Mumbai-400614

Tel.: 27693895, 27602042

Fax: 27570633

 

M/s. Royal Marketing (Food Products Div)

29, West Road, West C.I.T. Nagar

Chennai- 600035 T.N.

Tel.: 24356023, 24355726, 24363558

E-mail: royalmarketing@kmronline.com.

 

Basis and Presumptions

  1. This project is based on the assumptions that productivity is done on single shift basis. The shift consists of 8 hours per day and number of working days per month is 25 calculating out 300 days in a year.
  2. It is supposed that the production unit is utilizing the latest automatic machines indigenously available.
  3. The machinery cost, cost of equipments & raw materials are all approximate to those prevailing at the time of preparation of this project.
  4. The machinery & equipment used are standard ones.
  5. Preoperative cost includes the cost of installation & electrification, which is considered to be equal to 10% of cost of machinery & equipment.
  6. Salary and wages for the workers are based on the prevailing rates and would certainly increase in future due the increasing prices of goods & services.
  7. Salary is calculated considering the factors of bonus & increment, so additional 20% p.a. is added to get total salary & wages.
  8. Raw material availability is the basic element for any industry, so it is advisable to set up the production unit nearest to the place where the raw material is in abundance and also considering the other cost factors such as rent, utilities etc.
  9. It is assumed that total capital investment consists of
    • Total Fixed Cost
    • Working capital of 3 months
  10. Interest on the capital investment has been taken @ 12% per annum
  11. Depreciations has been considered:
    • on machineries @ 25%
    • on office equipment @ 10%
    • on building @ 12%
  12. The Break Even Point percentage indicated is of full capacity utilization.
  13. The project preparation cost, whenever required could be considered under pre operative expenses.

Implementation Schedule

  1. The entrepreneur whether established or a new one arriving at a decision of venturing in this project, mainly consider the factors such as market potential, demand and suuply gap and availablity of resources. Then he would require a project report. It takes around a month's period.
  2. Once the selection of the product is done the entrepreneur has to essentially get a provisional registration certificate fom DIC, so that he can apply for the allotment of land, power etc. The process takes around 2 months.
  3. Now, entrepreneur is considered eligible for loans from financial institutions, which require a detailed copy of the project report. On the basis of this report the financial institutions may at least take around 3-4 months time for sanctioning and disbursing the loan.
  4. The building construction would take atleast 3-4 months.
  5. Simultaneously after 2 months of applying for loans, the order for plant machinery may be finalized after getting one/two installments of loan. The process of procurement of plant machinery would take around 2 months.
  6. Once the plant machinery and other equipments are procured, the installation, electrification and commissioning process of the production plant takes at least 1-1½ months.
  7. The order for the raw materials is also placed along with the process of installation of plant machinery and electrification. The procurement of raw material would take 1 month.
  8. The time period for the process of recruitment is considered to be 2 months.
  9. The production may be commenced after a trial run of the installed plant & machinery. The time period for trial run varies from process to process. For this unit the time of trial production is 15 days.
  10. After the trial production period is over the commercial production starts.

Technical Aspects

Process of Manufacture

Noodles is the term being used to designate products made from blend of flours. The major component of noodles is tapioca flour and maida. A noodle is manufactured in different sizes, hollow as well as solid, for different cooking methods. Some are made for cooking and others are for frying. The noodles specified in this Profile are for frying.

Typical Blending for 16 Kg. of Product

Maida : 8 Kgs.
Starch : 7 Kgs.
Sodium bicarbonate : 850 gms.
Salt : 150 gms.
Edible colour : Q.S.

Process in Detail

Dry Mixing

The average moisture content of dry mixes is 10-11%. The three main ingredients of noodles maida, starch and soda bicarbonate are blended in a vertical mixer alongwith the edible colours.

Dough Formation

Dough is formed from the above blend only by using boiled water, when a part of the starch is gelatinized. The ingredients are supplied in dough mixer for about 12 to 15 minutes mixing.

Extrusion

Now, the kneaded dough is transferred to noodles making machine where extruded material of desired shape and length is obtained by using an appropriate type of die and suitably adjusting the distance between the dye surface and cutting blade. The moisture content of the product at this stage is about 33%.

Pre-drying

At this stage the cut noodles goods from the cutting machine fall on wooden trays. The product undergoes surface drying and becomes sufficiently hard enough to be handled without sticking or being crushed. The moisture content of the pre-dried product is about 29.5%.

Drying

The pre-dried product is finally semi-dried. The moisture content of the product will be 17%. Drying is done by exposure to indirect sunrays or placing in shade. The noodles dried as above do not have a satisfactory cooking quality and undergo a heavy loss on cooking. This can be reduced considerably by giving heat treatment to the product. This is optioned as this gives a brown colour to the product which may not be appealing to some of the customers.

Recent development in the manufacture of noodles is that the product is exposed to steam. The steamed product has three advantages: (1) longer shelf-life (2) harder grain, and (3) better eating quality than unsteamed product. Steaming is done by exposing the product in thin layer to steam for about 15 minutes. The steamed and subsequently dried product has a moisture content of about 10%. The steaming is done before the product is semi-dried.

Quality Control and Standards

The product must meet Processed Foods Association (PFA) specifications. However, BIS specification for Noodles is IS: 1485: 1976.

For further detail, please contact....

 

M/S. BUREAU OF INDIAN STANDARDS,

9, MANAK BHAVAN,

B.S. ZAFAR MARG,

NEW DELHI - 110 002.

Tel.: (091) (11) 23230131, 23233375, 23239402

Fax: 011-23234062, 23239399

E-mail: bis@vsnl.com

Website: http://www.bis.org.in

 

Production Capacity

  Quality per annum Value per annum(In Rs.)
Fresh Noodles 187.5 MT 45,00,000

Pollution Measures

The manufacturing process of this product does not cause any type of pollution i.e. air pollution, water pollution and noise pollution. However it is essential to obtain a no-objection certificate (NOC) from concerned state Pollution Control Board.

This general process of obtaining NOC certifies the manufacturing unit as a non-polluting unit.

Energy Conservation

Proper insulation reduces the heat loss during drying and steaming processes.

PLANT ECONOMICS

Basis

Number of Working Days = 25 Days/Month 300 Days/Annum
Number of Shift = 1 Per Day
One Shift = 8 Hours
Employment Generation = 12 People

Production capacity

a) Quantity = 187500 Kgs
b) Value = Rs 45 Lakhs.

A. FIXED COST

(1) Land & Building

Sl.No. Particulars Sq.Mtr. Rate(Rs.) Value(Rs.)
a. Land 500 1000 5,00,000
b. Cost of Land development, fencing, approach road, inside roads, land scaping, drainage etc. 500 200 1,00,000
c. Total built-up area 225 3000 6,75,000
  i) Administrative Building      
  ii) Factory Shed      
  iii) Stores, Staff Canteen etc.      
  Total     12,75,000

(2) Machinery and Equipments

Sl.No.Particulars
1. Vertical type powder mixer with motor complete
2. Dough mixer blade type
3. Noodles making power operated machine with different size die-heads
4. Wooden trays
5. Plastic Buckets
6. Aluminium/Galvanised iron water tape pipe line fittings
7. Water boiler-fuel heated
Approx. Total 4,00,000

(3) Preoperative (Erection & Installation Charges)     40,000

(4) Office furniture & equipments     25,000

Total FIxed Cost   =  (1+2+3+4)       17,40,000

B. WORKING COST

(1) Salary & Wages (per month)

Sl.No.DesignationNumberSalary(Rs.)Total(Rs.)
1. Manager 1 8,000 8,000
2. Supervisor 1 4,500 4,500
3. Chemist 1 4,000 4,000
4. Clerk 1 3,000 3,000
5. Peon/Watchman 1 2,000 2,000
6. Skilled Workers 2 2,500 5,000
7. Unskilled 4 2,000 8,000
  Total     34,500
  Plus perks @ 10% per annum     3,450
  TotalCost     37,950

(2) Raw material (per month)

Sl.No. Particulars  
a. Maida  
b. Starch  
c. Chemicals, Salt etc.  
d. Packaging Material  
  Approx. Total Rs. 1,80,000

(3) Utilities & Overheads (Per Month)

  1. Utilities      10,000
    • Power
    • Water
    • Fuel
    • Other Misc. Expenses
  2. Contingencies      25,000
    • Maintenance / Repair
    • Postage and Stationery
    • Sales Expenses
    • Stores
    • Telephone
    • Advertisement and Marketing
    • Travelling and Conveyance
    • Insurance
    • Miscellaneous

Approx. Total Cost       35,000

(4) Working Capital (per month)

Sl.No.ParticularsAmount(Rs.)
a. Salary / Wages 37,950
b. Raw Material 1,80,000
c. Utilities & Overheads 35,000
  Total 2,52,950

(5)  Total Working Capital  =   Working Capital (per month) * 3

      = 7,58,850

C. TOTAL CAPITAL INVESTMENT

a) Total Fixed Cost 17,40,000
b) Total Working Capital 7,58,850
  Total 24,98,850

ECONOMIC ANALYSIS

(1) Production Cost (per annum)

Sl.No.ParticularsAmount(Rs.)
a. Total Recurring Expenditure Working Capital (per month) * 12 30,35,400
b. Depreciation on Machineries @ 25% 1,00,000
c. Depreciation on office Equipment @ 10% 2,500
d. Interest on Capital @ 12% 2,99,862
e. Depreciation on Building @12% 93,000
  Total 35,30,762

(2) Sales / Turnover (per annum)

Sl.No.ParticularsRateAmount (Rs.)
a) Fresh noodles in 250 g packet 7.50 lakhs packets 6 45,00,000
  Total Cost   Rs. 45,00,000

(3)Profit (per annum)  =  Sales - Production Cost

      =  (2) - (1)    =  Rs 9,69,238

 

(4)Profit Sales Ratio  =  Profit / Sales * 100

      =  21.54%

 

(5)Rate of Return  =  Profit / Total Capital Investment * 100

      =  38.79%

 

(6) Break Even Point

(a) Fixed Cost of Plant

i. Interests    2,99,862

ii. Depreciation    1,95,500

iii. 40% of salaries & Overheads     3,50,160

Total    Rs. 8,45,522

(b) Profit     Rs. 9,69,238

As, B.E.P.   =   FIxed Cost of Plant * 100 / Fixed Cost of Plant + Profit

      =     46.6%

 

 

ABOUT NPCS

 

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report,  Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

 


And before diversifying/venturing into any product, wish to study the following aspects of the identified product:


• Good Present/Future Demand
• Export-Import Market Potential
• Raw Material & Manpower Availability
• Project Costs and Payback Period


We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

 

The report contains all the data which will help an entrepreneur find answers to questions like:

• Why I should invest in this project?
• What will drive the growth of the product?
• What are the costs involved?
• What will be the market potential?


The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product.

The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.


Reasons for buying the report:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.

• This report provides vital information on the product like its definition, characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

 

Our Approach:


• Our research reports broadly cover Indian markets, present analysis, outlook and forecast.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players. 

• We use reliable sources of information and databases.  And information from such sources is processed by us and included in the report.

 

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

 

 

Ø  Introduction

·         Project Introduction

·         Project Objective and Strategy

·         Concise History of the Product

·         Properties

·         BIS (Bureau of Indian Standards) Provision & Specification

·         Uses & Applications

 

Ø  Market Study and Assessment

·         Current Indian Market Scenario

·         Present Market Demand and Supply

·         Estimated Future Market Demand and Forecast

·         Statistics of Import & Export

·         Names & Addresses of Existing Units (Present Players)

·         Market Opportunity

 

Ø  Raw Material

·         List of Raw Materials

·         Properties of Raw Materials

·         Prescribed Quality of Raw Materials

·         List of Suppliers and Manufacturers

 

Ø  Personnel (Manpower) Requirements

·         Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

 

Ø  Plant and Machinery

·         List of Plant & Machinery

·         Miscellaneous Items

·         Appliances & Equipments

·         Laboratory Equipments & Accessories

·         Electrification

·         Electric Load & Water

·         Maintenance Cost

·         Sources of Plant & Machinery (Suppliers and Manufacturers)

 

Ø  Manufacturing Process and Formulations

·         Detailed Process of Manufacture with Formulation

·         Packaging Required

·         Process Flow Sheet Diagram

 

Ø  Infrastructure and Utilities

·         Project Location

·         Requirement of Land Area

·         Rates of the Land

·         Built Up Area

·         Construction Schedule

·         Plant Layout and Requirement of Utilities

 

Project at a Glance

Along with financial details as under:

 

  •     Assumptions for Profitability workings

  •    Plant Economics

  •    Production Schedule

  •    Land & Building

            Factory Land & Building

            Site Development Expenses

  •    Plant & Machinery

             Indigenous Machineries

            Other Machineries (Miscellaneous, Laboratory etc.)

  •    Other Fixed Assets

            Furniture & Fixtures

            Pre-operative and Preliminary Expenses

            Technical Knowhow

            Provision of Contingencies

  •   Working Capital Requirement Per Month

             Raw Material

            Packing Material

            Lab & ETP Chemical Cost

           Consumable Store

  •   Overheads Required Per Month And Per Annum

         Utilities & Overheads (Power, Water and Fuel Expenses etc.)

             Royalty and Other Charges

            Selling and Distribution Expenses

  •    Salary and Wages

  •    Turnover Per Annum

  •   Share Capital

            Equity Capital

            Preference Share Capital

 

  •    Annexure 1:: Cost of Project and Means of Finance

  •    Annexure 2::  Profitability and Net Cash Accruals

                Revenue/Income/Realisation

                Expenses/Cost of Products/Services/Items

                Gross Profit

                Financial Charges     

                Total Cost of Sales

                Net Profit After Taxes

                Net Cash Accruals

  •   Annexure 3 :: Assessment of Working Capital requirements

                Current Assets

                Gross Working. Capital

                Current Liabilities

                Net Working Capital

                Working Note for Calculation of Work-in-process

  •    Annexure 4 :: Sources and Disposition of Funds

  •    Annexure 5 :: Projected Balance Sheets

                ROI (Average of Fixed Assets)

                RONW (Average of Share Capital)

                ROI (Average of Total Assets)

  •    Annexure 6 :: Profitability ratios

                D.S.C.R

                Earnings Per Share (EPS)

               

             Debt Equity Ratio

        Annexure 7   :: Break-Even Analysis

                Variable Cost & Expenses

                Semi-Var./Semi-Fixed Exp.

                Profit Volume Ratio (PVR)

                Fixed Expenses / Cost 

                B.E.P

  •   Annexure 8 to 11:: Sensitivity Analysis-Price/Volume

            Resultant N.P.B.T

            Resultant D.S.C.R

   Resultant PV Ratio

   Resultant DER

  Resultant ROI

          Resultant BEP

  •    Annexure 12 :: Shareholding Pattern and Stake Status

        Equity Capital

        Preference Share Capital

  •   Annexure 13 :: Quantitative Details-Output/Sales/Stocks

        Determined Capacity P.A of Products/Services

        Achievable Efficiency/Yield % of Products/Services/Items 

        Net Usable Load/Capacity of Products/Services/Items   

       Expected Sales/ Revenue/ Income of Products/ Services/ Items   

  •    Annexure 14 :: Product wise domestic Sales Realisation

  •    Annexure 15 :: Total Raw Material Cost

  •    Annexure 16 :: Raw Material Cost per unit

  •    Annexure 17 :: Total Lab & ETP Chemical Cost

  •    Annexure 18  :: Consumables, Store etc.,

  •    Annexure 19  :: Packing Material Cost

  •    Annexure 20  :: Packing Material Cost Per Unit

  •    Annexure 21 :: Employees Expenses

  •    Annexure 22 :: Fuel Expenses

  •    Annexure 23 :: Power/Electricity Expenses

  •    Annexure 24 :: Royalty & Other Charges

  •    Annexure 25 :: Repairs & Maintenance Exp.

  •    Annexure 26 :: Other Mfg. Expenses

  •    Annexure 27 :: Administration Expenses

  •    Annexure 28 :: Selling Expenses

  •    Annexure 29 :: Depreciation Charges – as per Books (Total)

  •   Annexure 30   :: Depreciation Charges – as per Books (P & M)

  •   Annexure 31   :: Depreciation Charges - As per IT Act WDV (Total)

  •   Annexure 32   :: Depreciation Charges - As per IT Act WDV (P & M)

  •   Annexure 33   :: Interest and Repayment - Term Loans

  •   Annexure 34   :: Tax on Profits

  •   Annexure 35   ::Projected Pay-Back Period And IRR