Niir Project Consultancy Services (NPCS) through its network of project consultants in a wide range of business and technological disciplines is engaged in providing services to its clients by way of preparation of project reports. We provide the pre-investment information and business plans required for promoters, business leaders, young entrepreneurs, women entrepreneurs, investors, NRI (Non Resident India), startups, professionals looking to start their own venture. The comprehensive project profile reports cover all the aspects of business, from analyzing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. the scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet, break-even point, rate of return (ROR), etc. the DPR is formulated by highly accomplished and experienced consultants and the market research and analysis are supported by a panel of experts and digitized data bank.

Copper Wire Drawing and Enamelling

Capacity 0 Plant and Machinery cost 0.00 Lakhs
Working Capital 0.00 Rate of Return (ROR) 0.00 %
Break Even Point (BEP) 0.00 % TCI 0.00 Lakhs
Cost of Project 0.00Lakhs


Copper Wire Drawing and Enamelling. Manufacturing of Copper and Copper Products. Start Your Own Industry In Wire & Copper.

Copper wire is an essential material for motor and transformer winding. Copper wire is available in different gauges (32 gauge to 18 gauge).  The gauge of the copper wire depends upon the winding required for the specific motor or transformer. The wire having conductor diameter from 0.500 to 4.000 mm, is suitable for submersible motor winding. There is a heavy market for copper wire/enamelled copper wire in motor and transformer manufacturers and this wire is also used in rewinding of motors and transformers. Reasons for its wide use is that the copper has resistance to atmospheric corrosion because of the formation of uniform layer of oxide on the surface of metal.

Two types of enamelling furnaces are there. First one in which wire passes through oven with direct heating to required temperature with heaters. Second one in which wire passes through a Stainless Steel tube (just like annealing tube) which is heated to required temperature by heaters i.e. indirect heating. The size of Enamelled wire is 0.40 MM.

There is a heavy market for copper wire/enamelled copper wire in motor and transformer manufacturers and this wire is also used in rewinding of motors and transformers.


Reasons for its wide use is that the copper has resistance to atmospheric corrosion because of the formation of uniform layer of oxide on the surface of metal. Besides these, copper has good mechanical properties viz – good mechanical malleability & formability which.  It can easily welded or soldered.   The melting temperature of copper is 1083oC.

Copper is the most used conducting metal. There is a good market for enameled copper wire in motors and transformers industries for winding and rewinding of motors & transformers. Wire is made by cold drawing hot rolled wire/rod through on more dies, to decrease its size and increase the physical properties. In continuous drawing, the wire is fed through several dies and draw blocks arranged in series. Copper wire is used in all type of electric motor. It is used in the manufacture of auto electrical parts such as auto burn etc. According to an estimate over 40% of the total copper wire production of India goes to motor & transformer industries for winding & rewinding purposes. Electrical transmission line is another vital field where copper wires are heavily used along with its competitor metal like aluminium & steels.

Type of Enameled Copper Wires

·         Acetal Enamelled Wire

·         Polyester Enamelled Wire

·         Polyurethane Enamelled Wire

·         Composite Coating Enameled Wire

Benefits of Using Copper Wire

Copper wire is the most preferred wire today for umpteen critical industries, like electronics, telecommunications, construction, marine, and so forth. These great features of Copper wire have made it an obvious choice for these industries.

Ø  Flexibility: Flexible in nature, Copper wire can be Moulded, cut and blend to suit the needs. Such need is widely required in industries such as marine and construction.

Ø  Conductivity: Copper is the second highest conductivity element, with silver being the most. Because of the extremely high electrical and thermal conductivity features of Copper wire and less expensive than silver, make Copper wire the most sought-after wire for industries.

Ø  Melting Point: Since Copper displays absolutely high melting point, it suits to the needs of industries like-electrical and construction.

Ø  Strength: Copper wire is very strong as it is made out of high tensile Copper Ore. In industries like telecommunication where wire is used for signal transmission across long distance, wire of similar strength is required.

Ø  Compatible: Copper wires such as – bare copper wire and tinsel copper wire - are highly compatible with one another, and they can form brisk mixture should there be need


·         Electronic Information Industry

·         Power Industry

·         Machinery and Equipment Industry

The wire enamels market can be segmented into aluminum wires, copper wires, and others. The copper wires segment dominates the global wire enamels market, due to extensive usage of copper wires in various end-use industries such as electronics, power generation, and energy transmission.

Enamelled Aluminium Wire or Enameled Copper Wire is a wire coated with a thin layer of enamel (varnish) insulation to prevent the wire surfaces from being in a short circuit when wound into coils. Magnetic flux is created when current flows through the coil. Aluminum Enameled Wire and Copper Enamelled Winding Wire are used mainly in the construction of motors, electromagnets, transformers and inductors. For ease of manufacturing inductive components like transformers and inductors, most of these wires can be soldered.

Enameled Aluminum Wire or Enamelled copper wire, also called Magnet Wire, is widely used in various Electrical Applications due to its superior Electrical, Thermal and Mechanical Properties. Enameled Aluminium Wire /Enameled Copper Wire are insulated by coating it with enamel of different temperature class. Enamelled Aluminum Wire /Enamelled Copper Wire are primarily used in three types of applications in transformers to transform one kind of electrical energy into other kinds. Aluminum Enameled Wire and Copper Enameled Winding Wire are used in motors to transform electrical energy into mechanical energy. Enamelled Aluminium Winding Wire /Enamelled Copper Winding Wire are also used in generators to transform mechanical energy into electrical energy.


Enameled Aluminum Magnet Wire and Enamelled Copper Magnet wire are used as the wire in electromagnets that use electricity to generate a magnetic field. Enameled Rectangular or Flat Aluminium Wire and Enameled Rectangular or Flat Copper Wire /Strip is wrapped in a tight coil. When an electric charge is applied, the wires generate the magnetic field. Flat Enamelled Aluminium Wire and Flat Enamelled copper wire have a wide variety of applications, including use in automobiles, motors, transformers and industrial machineries. Round Enameled Aluminium Wire and Round Enameled copper wire are also found in smaller devices and home appliances, such as computers, televisions etc.

Properties of Copper Wire

Ø  Tensile Strength

Ø  Electrical Conductivity

Ø  Strength and Ductility combination

Ø  Creep resistance (it doesn’t change much due to heat)

Ø  Corrosion resistance

Ø  Co-efficient of thermal expansion

Ø  Thermal conductivity

Ø  Ability to be soldered

Related Project: - Copper and Copper Products and Projects

Market Outlook

The enameled copper wire segment accounted for the maximum market share during 2016 and will continue to dominate the market for the next few years. Some of the major factors responsible for the growing demand for these wires is its excellent properties such as high resistance to processing and winding or pull-in techniques. The increasing adoption of energy-efficient motors will drive the growth prospects for the copper enameled and bare wire market in the forthcoming years. Some of the major factors responsible for the growing of adoption energy-efficient motors is the stringent electricity consumption standards and the increasing price of electricity products.

Enameled and bare copper wire are used in the electrical and power equipment sector to connect the generator to step-up transformers and the transformers to motors. One of the major factors responsible for the market’s growth is the increasing demand for transformers and motors due to the rising number of substations.

Wire enamels are applied on round and flat wires made of copper and aluminum. Wire enamels are cured onto these wires with the help of heat. They act as primary electric insulation. Wires coated with wire enamels are called magnet wires or enameled wires. These wires are widely used in transformers, generators, motors, and electric measuring instruments. Wire enamels reduce the chances of short circuit, which helps in extending the life of wires. Wires can be coated with up to 30 layers of enamel. Wire enamels offer thermal and chemical resistance along with improved mechanical stability. Materials such as polyurethane, polyesterimide, and polyester are used to insulate copper and aluminum wires.

Rise in the demand for wire enamels for use in electronic applications and increase in the usage of these enamels in power generation applications are expected to drive the wire enamels market in the next few years. This is prompting companies to increase the production of wire enamel. Additionally, easy availability of raw materials required to manufacture wire enamels is anticipated to boost the market. Technological advancements in wire enamels are increasing. Companies are striving to develop new and better methods to wire enamels. Development of new processes for the manufacture of wire enamels and rise in their utilization are expected to propel the market.

Based on type, the wire enamels market can be divided into polyurethane, polyesterimide, polyester, polyamide-imide, and others. Polyurethane wire enamels are employed in timers, relays, small transformers, small motors, and fly-back transformers due to their excellent solder-ability and good crazing and pin-hole resistance. Polyesterimide wire enamels possess outstanding thermal properties, which makes them a favorable electric insulation material for high-end applications. Polyesterimide enameled wires are extensively used for ballasts, explosion-proof motors, compressors, dry transformers, washing machine motors, and electric tools. The polyesterimide segment dominates the wire enamels market, due to extensive usage of polyesterimide enameled wires in industries such as power generation and electronics across the globe.

Based on geography, the global wire enamels market can be segregated into North America, Latin America, Asia Pacific, Europe, and Middle East & Africa. Asia Pacific and North America are anticipated to constitute a major share of the global wire enamels market. The wire enamels market in Asia Pacific is projected to expand at a significant pace from 2018 to 2026, due to rise in the demand for wire enamels market for use in the electronics industry in the region. Europe is anticipated to be an attractive wire enamels market between 2018 and 2026, owing to increase in the demand for wire enamels market from the power generation industry in the region.

The globe have been working tirelessly to find out the different ways to reap the optimal benefits of copper. They have been able to manufacture different types of copper wire that work almost any application for electrical current need. Other popular uses for copper wire includes, solid or stranded bare copper wire, copper wire cables and plated copper wire. Although, not all of them is involved in electricity, they are one of the most useful metals. The copper enameled market is anticipated to grow at a steady rate and will post a CAGR of more than 5%. The growing power and electrical equipment sector will drive the growth prospects for the copper enameled market in until the end of 2021.

The Wire Drawing Process

The process itself is actually quite simple.  To begin the wire drawing process, a spool of wire is placed at beginning of the machine on a spool.  In order to feed it through the machine, the end of wire must be cut or flattened.  It is fed through the machine and through a series of dies to achieve its final cross sectional area.  The end of the machine usually has a spool or coiler so the finished product is a coil of wire at the desired cross sectional area.  The end process may also be a barrel packer where a barrel is placed and the coiled wire is spooled directly into the barrel using a turntable.

It is vitally important the temperature of the machinery does not get too hot (primarily caused by the energy released while deforming of the metal) and the wire has a constant tension and speed as it moves through the series of dies.  Historically this was achieved solely by mechanical means.  However, DC drives began to be used to operate the motors at certain levels depending on the metal and cross section required.  As technology improved, software was added for winder applications which kept the material moving at the proper speed and tension to ensure a good product.  This removed some of the mechanics and transferred it to electronic technology.  With the introduction of high performance/ high efficiency ac drives with powerful processors for software, mechanical dependency on the machinery is greatly diminished.

Key Players:-

Bhagyanagar Metals Ltd., Bharat Insulation Co. (India) Ltd., C M I Ltd., Dharmadeep Powerdive Inds. Ltd., G K Winding Wires Ltd., Ganga Electrocast Ltd., Globus Corpooration Ltd., Hindustan Transmission Products Ltd., Indo American Electricals Ltd., M P Telelinks Ltd., Mardia Samyoung Capillary Tubes Co. Ltd., Paramount Communications Ltd., Patron Industries Pvt. Ltd., Powerflow Ltd., Precision Wires India Ltd., Ram Ratna Wires Ltd., Robot Systems Pvt. Ltd., Salzer Electronics Ltd., Shakti Insulated Wires Pvt. Ltd., Shalimar Wires Industries Ltd., Supreme Conductors Ltd., Translam Ltd., Vardhaman Wires & Polymers Ltd., Versatile Wires Ltd., Vidarbha Winding Wires Ltd.,


#projectreport #DetailedProjectReport #businessconsultant #businessfeasibilityreport #BusinessPlan #copperwire #copperwiredrawing #wiredrawing #enameledcopperwire #CopperProducts #ElectricalIndustry #wireproducts #wireBusiness #wirecable #wirecableindustry #marinesector #electronicsector #ConstructionSector



  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.



NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report,  Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.


And before diversifying/venturing into any product, wish to study the following aspects of the identified product:

• Good Present/Future Demand
• Export-Import Market Potential
• Raw Material & Manpower Availability
• Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.


The report contains all the data which will help an entrepreneur find answers to questions like:

• Why I should invest in this project?
• What will drive the growth of the product?
• What are the costs involved?
• What will be the market potential?

The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product.

The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.

Reasons for buying the report:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.

• This report provides vital information on the product like its definition, characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.


Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players. 

• We use reliable sources of information and databases.  And information from such sources is processed by us and included in the report.


Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:



Ø  Introduction

·         Project Introduction

·         Project Objective and Strategy

·         Concise History of the Product

·         Properties

·         BIS (Bureau of Indian Standards) Provision & Specification

·         Uses & Applications


Ø  Market Study and Assessment

·         Current Indian Market Scenario

·         Present Market Demand and Supply

·         Estimated Future Market Demand and Forecast

·         Statistics of Import & Export

·         Names & Addresses of Existing Units (Present Players)

·         Market Opportunity


Ø  Raw Material

·         List of Raw Materials

·         Properties of Raw Materials

·         Prescribed Quality of Raw Materials

·         List of Suppliers and Manufacturers


Ø  Personnel (Manpower) Requirements

·         Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel


Ø  Plant and Machinery

·         List of Plant & Machinery

·         Miscellaneous Items

·         Appliances & Equipments

·         Laboratory Equipments & Accessories

·         Electrification

·         Electric Load & Water

·         Maintenance Cost

·         Sources of Plant & Machinery (Suppliers and Manufacturers)


Ø  Manufacturing Process and Formulations

·         Detailed Process of Manufacture with Formulation

·         Packaging Required

·         Process Flow Sheet Diagram


Ø  Infrastructure and Utilities

·         Project Location

·         Requirement of Land Area

·         Rates of the Land

·         Built Up Area

·         Construction Schedule

·         Plant Layout and Requirement of Utilities


Project at a Glance

Along with financial details as under:


  •     Assumptions for Profitability workings

  •    Plant Economics

  •    Production Schedule

  •    Land & Building

            Factory Land & Building

            Site Development Expenses

  •    Plant & Machinery

             Indigenous Machineries

            Other Machineries (Miscellaneous, Laboratory etc.)

  •    Other Fixed Assets

            Furniture & Fixtures

            Pre-operative and Preliminary Expenses

            Technical Knowhow

            Provision of Contingencies

  •   Working Capital Requirement Per Month

             Raw Material

            Packing Material

            Lab & ETP Chemical Cost

           Consumable Store

  •   Overheads Required Per Month And Per Annum

         Utilities & Overheads (Power, Water and Fuel Expenses etc.)

             Royalty and Other Charges

            Selling and Distribution Expenses

  •    Salary and Wages

  •    Turnover Per Annum

  •   Share Capital

            Equity Capital

            Preference Share Capital


  •    Annexure 1:: Cost of Project and Means of Finance

  •    Annexure 2::  Profitability and Net Cash Accruals


                Expenses/Cost of Products/Services/Items

                Gross Profit

                Financial Charges     

                Total Cost of Sales

                Net Profit After Taxes

                Net Cash Accruals

  •   Annexure 3 :: Assessment of Working Capital requirements

                Current Assets

                Gross Working. Capital

                Current Liabilities

                Net Working Capital

                Working Note for Calculation of Work-in-process

  •    Annexure 4 :: Sources and Disposition of Funds

  •    Annexure 5 :: Projected Balance Sheets

                ROI (Average of Fixed Assets)

                RONW (Average of Share Capital)

                ROI (Average of Total Assets)

  •    Annexure 6 :: Profitability ratios


                Earnings Per Share (EPS)


             Debt Equity Ratio

        Annexure 7   :: Break-Even Analysis

                Variable Cost & Expenses

                Semi-Var./Semi-Fixed Exp.

                Profit Volume Ratio (PVR)

                Fixed Expenses / Cost 


  •   Annexure 8 to 11:: Sensitivity Analysis-Price/Volume

            Resultant N.P.B.T

            Resultant D.S.C.R

   Resultant PV Ratio

   Resultant DER

  Resultant ROI

          Resultant BEP

  •    Annexure 12 :: Shareholding Pattern and Stake Status

        Equity Capital

        Preference Share Capital

  •   Annexure 13 :: Quantitative Details-Output/Sales/Stocks

        Determined Capacity P.A of Products/Services

        Achievable Efficiency/Yield % of Products/Services/Items 

        Net Usable Load/Capacity of Products/Services/Items   

       Expected Sales/ Revenue/ Income of Products/ Services/ Items   

  •    Annexure 14 :: Product wise domestic Sales Realisation

  •    Annexure 15 :: Total Raw Material Cost

  •    Annexure 16 :: Raw Material Cost per unit

  •    Annexure 17 :: Total Lab & ETP Chemical Cost

  •    Annexure 18  :: Consumables, Store etc.,

  •    Annexure 19  :: Packing Material Cost

  •    Annexure 20  :: Packing Material Cost Per Unit

  •    Annexure 21 :: Employees Expenses

  •    Annexure 22 :: Fuel Expenses

  •    Annexure 23 :: Power/Electricity Expenses

  •    Annexure 24 :: Royalty & Other Charges

  •    Annexure 25 :: Repairs & Maintenance Exp.

  •    Annexure 26 :: Other Mfg. Expenses

  •    Annexure 27 :: Administration Expenses

  •    Annexure 28 :: Selling Expenses

  •    Annexure 29 :: Depreciation Charges – as per Books (Total)

  •   Annexure 30   :: Depreciation Charges – as per Books (P & M)

  •   Annexure 31   :: Depreciation Charges - As per IT Act WDV (Total)

  •   Annexure 32   :: Depreciation Charges - As per IT Act WDV (P & M)

  •   Annexure 33   :: Interest and Repayment - Term Loans

  •   Annexure 34   :: Tax on Profits

  •   Annexure 35   ::Projected Pay-Back Period And IRR