Indian drugs and pharmaceutical industry has advanced perceptibly and is getting ready  for the new patent regime and  to withstand global competition, which is expected to be unleashed by new winds of liberalisation - a new era of liberalisation - much different from what was ushered in since the conclusion of the Uruguay Round and the establishment of the World Trade Organisation.

The industry has been expanding at annual rates ranging between 8 to 10% (against global growth rate of 6%).  According to a study  by McKinsey, Vision 2010, the domestic pharmaceutical industry could attain a size of  $25 billion (Rs 1200 billion) by 2010 by focusing on two areas: first, innovation-led research, development and new drug discoveries; and second, information technology-led remote sales and marketing.  The market for bulk drugs and formulations had increased from about Rs 103  billion in 1990-91 to an estimated Rs 435  billion at the end of 2003-04.  The prices of Indian essential drugs are among the lowest in the world. Apart from strides made by the industry in the last half-a-century, lower production cost due to reverse engineering and low R&D outlays has been a major factor in keeping the prices under check.

The global pharmaceutical industry is estimated at $ 300 billion, not all representing cross-border trade.  India's measly share of $ 1.5 billion in global trade represents an untapped potential. Under the regime of economic liberalisation underway since early 1990s, the drugs and pharmaceutical sector witnessed initiatives at fresh investment in the sector. Nearly 1735 investment proposals of the order of around Rs 166  billion were initiated. The foreign collaboration proposals approved numbered around 425 with a foreign direct investment  (FDI) component of over Rs 25 billion. The pharmaceuticals have figured high on the export front. In 2001-02,  the sector was  estimated to have registered a growth of 17.6% at around Rs 20.3 billion.

In the wake of economic liberalisation, many a  overseas players  returned or contemplated returning to India. These include Ivox Corp (USA),  Taro Pharmaceuticals (Israel) and Merck (USA). These are out either to set shop or looking for acquisitions in India. Hexal AG of Germany has established a liaison office in India. MILLIONCs like Rocha, Bayer, Aventis and Chiron are making India a regional hub for bulk drugs. 

The Export Import Bank of India (Exim Bank) had  doubled its corpus for the pharmaceutical industry to Rs 2 billion as a result of increased activity in the industry, especially in the external sector. The fund is used for the development and commercialisation of the new products and applications, significant improvement in the existing design of  products, setting up and expansion of pilot plants, research studies for obtaining regulatory approvals, cost of filing and managing international patent and R&D Centres.

It needs, however, to be recognised that the presence  of small scale manufacturers has resulted, on the one hand,  in a highly fragmented industry, and on the other, it has made it possible to supply a near 100,000 drugs including vitamins, antibiotics, antibacterials, cardio-vascular and other essential drugs. These account for nearly 37% of the market.  While each of about 80% of the manufacturers has annual sales below a billion rupees, top ten companies are known to control over 30% of the market. At present there are more than 20,000 players in the country.

The major players are: Alembic Chem, Aurobindo Pharma, Cipla, Dr. Reddy's, FDC, IPCA Labs, Jagsonpal Pharma, J.B. Chemicals, Kopran, Lupin Labs, Lyka Labs, Morepan Labs, Nicholas Piramal, Ranbaxy Labs, Sun Pharma, Themis Medicare, GlaxoSmithkline, Astrazeneca, Aventis, E-Merck, Torrent Pharma, TTK Healthcare, Unichem Labs,  Wockhardt  and  Zandu Pharma.  Until recently, only a few of the Indian companies had gone into any serious R&D activity. Much of the effort was directed to affordable analogue research. The R&D level in the country is low with even well-placed pharma companies spending less than 2% of turnover on R&D. MILLIONCs are known to contribute as much as 10% or more of their turnover to R&D.  While India is very strong in process chemistry, biology and applied bio-chemistry, initiatives at all levels - government, academia, private sector - involving heavy financial outlays, are called for.

Ayurveda continues to remain a preferred system of medicine for a vast segment of population in the country. The country has over 400,000 registered practitioners of the Indian system of medicine. Around 170 institutes properly affiliated to various universities impart under- or post-graduate courses each year. These institutes churn out some 5,500 fresh practitioners. The practitioners are supported by 12,000 dispensaries and 2,100 beds available for ayurveda treatment countrywide. The emerging biotechnology sector has already taken by storm and is offering sops to states to make these as the thriving ground for the highly potential segment in medicare.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
NICOTINE FROM TOBACCO WASTE
NICOTINE FROM TOBACCO WASTE

From harvesting of tobacco to manufacture of product large quantities of waste material comprising rejected leaves, broken bits of lamina, midribs ... Read More

Capacity : 9,000 Ltrs./Annum
Plant and Machinery cost: 43.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):47.00 %
TCI :153.00 Lakhs
Cost of Project : 153.00Lakhs
Add To Inquiry Basket
GLYCERIN
GLYCERIN

Glycerin is a simple polyol compound. It is a colorless, odorless, viscous liquid that is widely used in pharmaceutical formulations. Glycerol has ... Read More

Capacity :
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
SURGICAL SUTURES MATERIALS (Surgical Gut, Polyglactin, Polyglycolic Acid, Poliglecaprone, Polydioxanone, Nylon, Polypropylene, Polyester)
SURGICAL SUTURES MATERIALS (Surgical Gut, Polyglactin, Polyglycolic Acid, Poliglecaprone, Polydioxanone, Nylon, Polypropylene, Polyester)

General classification of sutures includes natural and synthetic, absorbable and non absorbable and monofilament and multifilament. Natural materia... Read More

Capacity : 12000 PCS/day
Plant and Machinery cost: 856.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):38.00 %
TCI :1673.00 Lakhs
Cost of Project : 1673.00Lakhs
Add To Inquiry Basket
STARCH AND ALLIED PRODUCTS FROM MAIZE(Starch, Liquid Glucose, Dextrose Monohydrate, Dextrose Anhydrous, Sorbitol and Vitamin C)
STARCH AND ALLIED PRODUCTS FROM MAIZE(Starch, Liquid Glucose, Dextrose Monohydrate, Dextrose Anhydrous, Sorbitol and Vitamin C)

Starch is a group of polysaccharides, composed of glucopyranose units joined together by-glucosidric linkages. It conf... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Modified Potato Starch
Modified Potato Starch

Potato starch is essential as a universal binding and food thickening agent. Leveraging on over expertise in potato starch production, we began pro... Read More

Capacity : 167 MT / Day
Plant and Machinery cost: 463.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):51.00%
Break Even Point (BEP):27.00 %
TCI :3843.00 Lakhs
Cost of Project : 3843.00Lakhs
Add To Inquiry Basket
Rectified Spirit
Rectified Spirit

Denatured spirit is the product of manufacture from ethyl alcohol or ethanol. The denatured alcohol are either completely denatured alcohol or spec... Read More

Capacity : 4000 Bottles / day
Plant and Machinery cost: 114.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):37.00%
Break Even Point (BEP):42.00 %
TCI :2129.00 Lakhs
Cost of Project : 2129.00Lakhs
Add To Inquiry Basket
MAIZE PROCESSING UNIT
MAIZE PROCESSING UNIT

Maize is one of the best cereals after paddy and wheat. It is largely cultivated in the north and west India, though ... Read More

Capacity : 200 MT Maize Processing/Day Products, Starch 133 MT, Glucose 20 MT, Gluten 18 MT, Germ 8 MT, Fiber
Plant and Machinery cost: 2913.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):58.00 %
TCI :6084.00 Lakhs
Cost of Project : 6084.00Lakhs
Add To Inquiry Basket
I V Fluid
I V Fluid

Intravenous fluids are fluids ... Read More

Capacity : 30000 Bottles/Day, each Bottles 0.5 ltrs. capacity
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):49.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Pharmaceutical Tablets, Capsules, Liquid Oral, Ointment, Powder and Injection
Pharmaceutical Tablets, Capsules, Liquid Oral, Ointment, Powder and Injection

The Pharmaceutical Industry in general is well managed in sound economic principles and has excellent techniques of production, technological backi... Read More

Capacity : 0
Plant and Machinery cost: 43.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):54.00 %
TCI :125.00 Lakhs
Cost of Project : 125.00Lakhs
Add To Inquiry Basket
SORBITOL, MALTITOL, DEXTROSE ANHYDROUS AND VITAMIN-C
SORBITOL, MALTITOL, DEXTROSE ANHYDROUS AND VITAMIN-C

Sorbitol is a water soluble polyhydric alcohol, having sweet taste and high stability besides properties of humectancy and plastisizing used in man... Read More

Capacity : 35 MT/Day, 15 MT Sorbitol, 5 MT Maltitol, 10 MT Dextrose Anhydrous, 5 MT/Day Vitamin C
Plant and Machinery cost: 607.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):39.00 %
TCI :2332.00 Lakhs
Cost of Project : 2332.00Lakhs
Add To Inquiry Basket
Amla (Gooseberry) Powder
Amla (Gooseberry) Powder

Amla powder is largely used for the production of Ayurvedic medicine. There is good demand of the Herbal medicinal product. The dried fruits of E.r... Read More

Capacity : 600 MT/Annum
Plant and Machinery cost: 52.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.00%
Break Even Point (BEP):63.00 %
TCI :154.00 Lakhs
Cost of Project : 154.00Lakhs
Add To Inquiry Basket
LIQUID GLUCOSE FROM RICE
LIQUID GLUCOSE FROM RICE

Rice is basically sources of starch content little amount of fat and protein in it. It contains also vitamins and minerals. Basic raw materials req... Read More

Capacity : 30000 MT/Annum
Plant and Machinery cost: 664.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):40.00%
Break Even Point (BEP):50.00 %
TCI :1107.00 Lakhs
Cost of Project : 1107.00Lakhs
Add To Inquiry Basket
Acrylic Teeth
Acrylic Teeth

There is increase of population through out the world. Most of the people has teeth problem in the earlier ages and maximum in the above age of 40 ... Read More

Capacity : 1000 Teeth/Day
Plant and Machinery cost: 13.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):49.00 %
TCI :18.00 Lakhs
Cost of Project : 18.00Lakhs
Add To Inquiry Basket
Disposable Plastic Syringes and Needles Manufacturing
Disposable Plastic Syringes and Needles Manufacturing

With the development of pharmaceutica... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Medicated Lozenges Like Strepsils, Tusg
Medicated Lozenges Like Strepsils, Tusg

Medicated lozenges are made basically by using glucose, water, calcium carbonate, peppermint and some other ingredients. It is used by children to ... Read More

Capacity : 1 Ton/Day
Plant and Machinery cost: 36.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):42.00 %
TCI :138.00 Lakhs
Cost of Project : 138.00Lakhs
Add To Inquiry Basket
Disposable Plastic Syringes
Disposable Plastic Syringes

The disposable plastic syringe ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Maize and its By-Products
Maize and its By-Products

Maize is one of the most important cereal crops in the world agricultural economy and is grown in many countries in ea... Read More

Capacity : Starch 4500 MT/Annum, Liquid Glucose 450 MT/Annum, Dextrose Monohydrate 1800 MT/Annum, Oxidised Star
Plant and Machinery cost: 200.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):35.00 %
TCI :500.00 Lakhs
Cost of Project : 500.00Lakhs
Add To Inquiry Basket
Maize Processing for Glucose
Maize Processing for Glucose

Maize is one of the cereal grains which produce through out India and is placed 3rd position in agricultural base prod... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Surgical Cotton & Bandages
Surgical Cotton & Bandages

Surgical Bandages are the products manufactured from white bleached Cotton gauge cloth of suitable quality. Absorbent cotton also known as surgical... Read More

Capacity : 90 Ton Surgical Cotton/Annum, 8 Lakh Nos. Surgical Bandages/Annum
Plant and Machinery cost: 16.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):53.00 %
TCI :51.00 Lakhs
Cost of Project : 51.00Lakhs
Add To Inquiry Basket
Pharmaceutical Grade Sugar
Pharmaceutical Grade Sugar

Pharmaceutical grade sugar can be manufactured by using cane beet or sugar itself. This is the most pure form of sugar, which may not contain sulfu... Read More

Capacity : 3000 MT/Annum
Plant and Machinery cost: 57.00 Lakhs
Working Capital : 137.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):53.00 %
TCI :300.00 Lakhs
Cost of Project : 300.00Lakhs
Add To Inquiry Basket
Paracetamol
Paracetamol

Paracetemol is an important intermediate in the manufacture of other pharmaceuticals like the antimalarial amodiaquine. Two types of paracetamol ar... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Pharmaceutical Industry
Pharmaceutical Industry

The progress of the pharmaceutical industry in India has been hampered by price and other controls. India?s pharmaceutical industry has made rapid ... Read More

Capacity : 0
Plant and Machinery cost: 19.00 Lakhs
Working Capital : 54.00
Rate of Return (ROR):41.08%
Break Even Point (BEP):53.83 %
TCI :99.00 Lakhs
Cost of Project : 99.00Lakhs
Add To Inquiry Basket
Manufacturing of Dextrose Anhydrous, Sorbitol & Vitamin C
Manufacturing of Dextrose Anhydrous, Sorbitol & Vitamin C

Dextrose anhydrous is generally manufactured from starch, basically maize starch. It is manufactured by vacuum evaporation of the dextrose solution... Read More

Capacity : 17.00 MT /Day
Plant and Machinery cost: 406.00 Lakhs
Working Capital : 575.00
Rate of Return (ROR):44.07%
Break Even Point (BEP):45.54 %
TCI :1280.00 Lakhs
Cost of Project : 1280.00Lakhs
Add To Inquiry Basket
Cough Syrup
Cough Syrup
In case of cough syrup preparation, there are two methods available. First, method by using allopathic based basic drugs and on the other side, cough ... Read More
Capacity : 10000 Bottles /Day
Plant and Machinery cost: 40.00 Lakhs
Working Capital : 175.00
Rate of Return (ROR):46.35%
Break Even Point (BEP):37.50 %
TCI :300.00 Lakhs
Cost of Project : 300.00Lakhs
Add To Inquiry Basket
Bovine Serum Albumin
Bovine Serum Albumin
Albumin?s are water soluble proteins which are found in both plant & animal tissues. Legumelin in leumes and leucosia in various cereals are examples ... Read More
Capacity : 1.50 Kgs/Day
Plant and Machinery cost: 99.00 Lakhs
Working Capital : 32.00
Rate of Return (ROR):43.58%
Break Even Point (BEP):46.12 %
TCI :190.00 Lakhs
Cost of Project : 190.00Lakhs
Add To Inquiry Basket
Implantable Surgical Suture (Biomedical Textile)
Implantable Surgical Suture (Biomedical Textile)

A fibrous protein comprising most of the white fibre in the connective tissue of animals and man, especially in the skin muscles and tendous. The ... Read More

Capacity : 50 Kg/Day
Plant and Machinery cost: 81.95 Lakhs
Working Capital : 14.32
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :192.91 Lakhs
Cost of Project : 192.91Lakhs
Add To Inquiry Basket
Ciprofloxacin
Ciprofloxacin

 

Ciprofloxacin is a... Read More

Capacity : 300 Kgs./Day
Plant and Machinery cost: 44.00 Lakhs
Working Capital : 130.00
Rate of Return (ROR):66.49%
Break Even Point (BEP):35.01 %
TCI :231.00 Lakhs
Cost of Project : 231.00Lakhs
Add To Inquiry Basket
Business Opportunities in Production of Menthol Crystals Highly Profitable Business Industry
Business Opportunities in Production of Menthol Crystals Highly Profitable Business Industry

 

Menthol is an organic substance derived from t... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Emerging Investment Opportunities in Business of Dextrose Saline, Intravenous Sugar Solution Pharmaceutical IV Fluids Industry
Emerging Investment Opportunities in Business of Dextrose Saline, Intravenous Sugar Solution Pharmaceutical IV Fluids Industry

Dextrose saline infusions are a single-dose bottle of clean, non-pyrogenic fluid and ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Setting up Paracetamol Acetaminophen API Manufacturing Unit Rising Demand of Paracetamol Tablets in Covid-19 Pandemic
Setting up Paracetamol Acetaminophen API Manufacturing Unit Rising Demand of Paracetamol Tablets in Covid-19 Pandemic

Pain reliever and fever red... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Emerging Business of Small Volume Parenteral Solutions SVPs Start Investing in Most Growing Business of Pharmaceutical
Emerging Business of Small Volume Parenteral Solutions SVPs Start Investing in Most Growing Business of Pharmaceutical

SVPs (small-volume parenter... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Startup Business of Sorbitol
Startup Business of Sorbitol

Sorbitol is a sugar alcohol... Read More

Capacity : Sorbitol 3,000 MT Per Annum
Plant and Machinery cost: 58.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 575.00Lakhs
Add To Inquiry Basket
Setup IV Fluid (FFS Technology) Business
Setup IV Fluid (FFS Technology) Business

IV fluid is a watery soluti... Read More

Capacity : 0
Plant and Machinery cost: 4205.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 5770.00Lakhs
Add To Inquiry Basket
IV Fluid (Intravenous Fluid) Market (Southern and Eastern African Countries)
IV Fluid (Intravenous Fluid) Market (Southern and Eastern African Countries)


Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Setup Unit Of Menthol Crystals From Mint Oil
Setup Unit Of Menthol Crystals From Mint Oil

Menthol crystals are a type of organic compound that have a cooling, minty aroma. The... Read More

Capacity : Menthol Crystals 300,000 Kg. Per Annum Dementholised Oil (DMO) 100,000 Kg. Per Annum
Plant and Machinery cost: 154.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 701.00Lakhs
Add To Inquiry Basket
Business Plan of Glucose Saline Manufacturing
Business Plan of Glucose Saline Manufacturing

 

Glucose, also known as dextrose, is a natural sugar that is chemically similar to glucose. If given in ad... Read More

Capacity : 200000 Bottles/ day
Plant and Machinery cost: 2170.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):37.00 %
TCI :0.00 Lakhs
Cost of Project : 4083.00Lakhs
Add To Inquiry Basket
Business Plan on Production of Sterile Water for Injection
Business Plan on Production of Sterile Water for Injection

Sterile Water for Injection, USP (SWFI) contains water that has been purified by reve... Read More

Capacity : Ampoules 5 ml Size: 200,000 Nos. per day, Ampoules 10 ml SizeL:150,000 Nos. per day, Ampoules 20 ml
Plant and Machinery cost: 1933.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):39.00 %
TCI :0.00 Lakhs
Cost of Project : 3040.00Lakhs
Add To Inquiry Basket
Manufacturing Business of IV Fluids BFS Technology
Manufacturing Business of IV Fluids BFS Technology

Intravenous fluids are fluids that are given to a patient intravenously (via the veins... Read More

Capacity : IV Fluids (500 ml Size Pack) 78,000 Packs Per Day
Plant and Machinery cost: 576.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 1190.00Lakhs
Add To Inquiry Basket
Start your own Sterile Water for Injection Production Business A Complete Business Plan
Start your own Sterile Water for Injection Production Business A Complete Business Plan

 

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Industrial Production of Ascorbic Acid Powder from Sorbitol Startup Business Opportunities for Entrepreneurs
Industrial Production of Ascorbic Acid Powder from Sorbitol Startup Business Opportunities for Entrepreneurs

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Menthol Crystal Making Business Plan
Menthol Crystal Making Business Plan

Menthol may be a white crystalline chemical product. It manufactured either from natural source or is produced synthet... Read More

Capacity : Menthol Crystal: 1,500 Kgs / Day Dmentha Oil: 500 Kgs / Day
Plant and Machinery cost: 196.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 642.00Lakhs
Add To Inquiry Basket
IV Fluid-Intravenous Fluid (BFS Technology) Manufacturing Plant
IV Fluid-Intravenous Fluid (BFS Technology) Manufacturing Plant

Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid ... Read More

Capacity : IV Fluids (500 ml Size Bottle):100,000 Bottles / Day
Plant and Machinery cost: 751.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 1277.00Lakhs
Add To Inquiry Basket
Active Pharma Ingredients (API) Amoxicillin Trihydrate, Azithromycin & Paracetamol
Active Pharma Ingredients (API) Amoxicillin Trihydrate, Azithromycin & Paracetamol

 

Active pharmaceutical ingredients are the active substances that are used in th... Read More

Capacity : Paracetamol : 1,000.0 Kgs / day Azithromycin: 500.0 Kgs / day Amoxicillin Trihydrate: 500.0 Kg
Plant and Machinery cost: 175.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):47.00 %
TCI :0.00 Lakhs
Cost of Project : 1322.00Lakhs
Add To Inquiry Basket
Investment Opportunities in APIs-KSMs-Drug Intermediates Bulk Drug Industries.
Investment Opportunities in APIs-KSMs-Drug Intermediates Bulk Drug Industries.

Investment Opportunities in APIs-KSMs-Drug Intermediates Bulk Drug Industries. Cabinet Approv... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Active Pharma Ingredients (API) (Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol)
Active Pharma Ingredients (API) (Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol)

 

The Active Pharmaceutical Ingredient (API) is the part of any drug that produce... Read More

Capacity : Paracetamol: 500 Kgs / day Cephalexin : 500 Kgs / day Ampicillin Trihydrate: 500 Kgs / day Ibuprofen
Plant and Machinery cost: 347.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 1656.00Lakhs
Add To Inquiry Basket
Production of Intravenous Fluids (IV Fluids)  (Blow-Fill-Seal - BFS Technology)
Production of Intravenous Fluids (IV Fluids) (Blow-Fill-Seal - BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the c... Read More

Capacity : IV Fluids (500 ml Size Pack): 80,000 Packs / Day IV Fluids (100 ml Size Pack): 80,000 Packs / Day
Plant and Machinery cost: 2592.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 3903.00Lakhs
Add To Inquiry Basket
Empty Hard Gelatin Capsules
Empty Hard Gelatin Capsules

Hard gelatin capsules are made of two shells: the capsule body and a shorter cap. They are clear, colorless, and essen... Read More

Capacity : 2500 Th.Nos./ day
Plant and Machinery cost: 1565.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 2149.00Lakhs
Add To Inquiry Basket
Empty Hard Gelatin Capsules Manufacturing Industry
Empty Hard Gelatin Capsules Manufacturing Industry

Empty Hard Gelatin Capsules Manufacturing Industry. Production of Empty Gel Capsules.... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Acyclovir
Acyclovir

Aciclovir (ACV), also known as acyclovir, is an antiviral medication. It is primarily used for the treatment of herpes... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Ampicillin
Ampicillin

Ampicillin is an antibiotic used to prevent and treat a number of bacterial infections, such as respiratory tract infe... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Natural Glycerin Manufacturing Industry
Natural Glycerin Manufacturing Industry

Natural Glycerin Manufacturing Industry. Start a Glycerol/ Glycerine Production Business.

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Thiourea (Using Carbon Disulphide)
Thiourea (Using Carbon Disulphide)

Thiourea is an organosulfur compound with the formula SC(NH2)2. It is structurally similar to urea, except that the ox... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Antiseptic Lotion (Dettol Type)
Antiseptic Lotion (Dettol Type)

Antiseptic is the chemical substances... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
IV Fluids (BFS Technology)
IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the c... Read More

Capacity : 49600 Pcs./Day
Plant and Machinery cost: 1954.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):52.00%
Break Even Point (BEP):25.00 %
TCI :0.00 Lakhs
Cost of Project : 2756.00Lakhs
Add To Inquiry Basket
Production of Crosslinked Sodium Carboxymethyl Cellulose
Production of Crosslinked Sodium Carboxymethyl Cellulose

Production of Crosslinked Sodium Carboxymethyl Cellulose. Cross-Linked CMC Manufacturing Industry. Cross-Linked So... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Intravenous Sugar Solution
Production of Intravenous Sugar Solution

Production of Intravenous Sugar Solution (Dextrose Solution, Glucose Saline, Intravenous Glucose, Saline and Gluco... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Ready Mix Coating Powder Used for Coating of Pharmaceuticals Tablets for Regular fill Coating and Functional Film Coating
Ready Mix Coating Powder Used for Coating of Pharmaceuticals Tablets for Regular fill Coating and Functional Film Coating

In pharmaceutical drug delivery of solid oral dosage forms film coatings are frequently applied. The motivation for coating... Read More

Capacity : Regular Film Coating Powder : 400 Kgs/Day Functional Fim Coating Powder : 400 Kgs/Day
Plant and Machinery cost: 19.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 172.00Lakhs
Add To Inquiry Basket
Sterile Water for Injection with BFS Technology
Sterile Water for Injection with BFS Technology

The objective of formulating and compounding sterile preparations is to provide a dosage form of a labeled drug, in the sta... Read More

Capacity : Ampoules 5 ml Size : 300,000 Th. Nos./annum Ampoules 10 ml Size : 260,000 Th. Nos./annum Am
Plant and Machinery cost: 607.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 917.00Lakhs
Add To Inquiry Basket
IV FLUID (Automatic Plant)
IV FLUID (Automatic Plant)

I.V. FLUID (Automatic Plant)

Intravenous... Read More

Capacity : 14,000,000 bottles/annum
Plant and Machinery cost: 462.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 1362.00Lakhs
Add To Inquiry Basket
Production of Soft Gelatin Capsules (Softgel Capsules) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis
Production of Soft Gelatin Capsules (Softgel Capsules) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Production Schedule, Working Capital Requirement, Plant Layout, Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break Even Analysis

Soft gelatin (also called softgel or soft elastic) capsules consist of one piece hermetically-sealed soft shells. Soft gelatin capsules are prepare... Read More

Capacity : 1,800,000 Th.Nos./annum
Plant and Machinery cost: 261.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 478.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Ayurvedic Medicines (Chya... Chyawanprash: 500.0 Kgs/Day•Cough Syrup (Herbal): 200.0 Kgs/Day•Ayurvedic Hair Oil: 200.0 Kgs 24.00 474.00
Hard Gelatin Capsules 450000 Th.Nos./Annum 12.00 549.00
Disposable Plastic Syring... Syringes (2 ml) : 90 Lakh Nos. /Annum,Syringes (5 ml) : 90 Lakh Nos. /Annum 26.00 455.00
Salicylic acid Aspirin 0.00 1.00 0.00
Cellulose Powder 1.00 0.00
Disposable Plastic Syring... - 27.00 288.00
Disposable Plastic Syring... 180 Lakh Nos. /annum 26.00 455.00
IV FLUID 144,00,000 Bottles/Annum 26.00 1367.00
Disposable Plastic Syring... 33600 NOS./Day 30.00 287.00
Glycerine 1 Ton/Day 40.00 174.00
QUININE SULPHATE FROM CIN... 60 MT/Annum 45.00 747.00
MAIZE & ITS BY-PRODUCTS 0 43.00 543.00
DISPOSABLE PLASTIC SYRING... 40000 Nos./Day (Disposable Plastic Syringes) 0.00 0.00
DISPOSABLE PLASTIC SYRING... Plastic Syringe 3 ml size 6000000 Nos./Annum,Syringe 5 ml Size 6000000 Nos./Annum,Syringe 10 ml Si 36.00 209.00
DISPOSABLE PLASTIC SYRING... 0 0.00 0.00
GELATIN SPONGE 20,000 Nos. / Day 46.00 273.00
Gelatin from Bones 600 Ton/Annum 42.00 274.00
TAMARIND BASED PRODUCTS- ... 41.00 477.00
Ayurvedic Pharmacy 25 days/month 51.00 171.00
Paracetamol 500.00 KGS./day 0.00 0.00
DEXTRIN FROM STARCH 10 MT/Day 47.00 309.00
Liquid Glucose From Maize 0 0.00 0.00
Gelatin Capsules Soft And... 120 Mt/Annum 35.00 220.00
Black Pepper Oil 45000 Kg/Annum 45.00 148.00
Dextrin From Starch 500 Kgs/Day 39.71 0.00
Dextrose Injection 10000 Bottles/Day 28.26 290.00
Black Braided Silk Surgic... 3000 Mtrs./Day 72.31 70.00
Paracetamol Paracetamol Tablets:5 MT per day Paracetamol Powder:1.4 MT per day 29.00 794.00
Profitable Business of 7-... 0.5 MT per Day 28.20 1937.00
Business and Investment O... 0 0.00 0.00
123456789

Showing 181 - 240 of 242 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.