The global herbal market is valued at the US $ 78.5 billion in 2019 and is projected to grow at a compound annual growth rate (CAGR) of 5.2% from 2020 to 2027. Products among consumers are some of the factors that are expected to help expand markets around the world. Increasing demand for chemical-free beauty products and growing awareness of brutal cosmetics supports the growth of the market.


The increasing acceptance of alternative medicines such as Ayurveda and herbal products around the world is evidence of humanity's quest to explore and experience Mother Nature for a healthy life. This "herbal" consumer interest is growing rapidly due to the toxicity and various side effects of symptomatic drugs.

In India, total exports of Ayurvedic and herbal products reached $ 446 million (MN) in the fiscal year 2019, and total exports since the fiscal year 2015 have steadily increased. Herbal products are part of it, contributing about 8.6 percent of India's total exports.


According to a current study by Exim Bank, the global market for herbal products is approximately $ 67 billion and is estimated to reach $ 5 trillion annually by 2050. India's share of this multi-billion dollar market is small. It is over 1%. This shows that despite the rich heritage of Ayurveda's literature and a wide range of herbal species, India cannot harness the potential demand available in this foreign trade sector.

 Currently, the industry lacks the proper growth direction. It lacks well-defined strategies and the guidance needed to promote the export of these medicines, herbal products, and herbal medicines (medicinal plants). I am.


India's herb and Ayurvedic industry must be innovative to compete with future international markets with a well-defined strategy. To assess the Indian spice and Ayurvedic industry's true value export potential by planning the entire growth cycle, preserving these natural resources, and understanding overseas markets to meet their needs. It is essential to systematically purchase a variety of herbal products.

 Export growth in herbal products depends on the establishment of a standardized system. The essence of achieving export growth lies in the dedicated efforts towards sustainable development of all aspects of the Indian herbal industry.


The Market Research Future (MRFR) forecasts that the global Chinese herbal medicine market will thrive at a CAGR of 5.88% and will reach a market value of $ 129,689.3 million by 2023.



Market dynamics

Increasing preference for traditional medicines to drive the market over a predicted period


According to a Market Research Report, increasing demand for Chinese medicine among the expanding population is critical in driving the market during the review period.  Indian herbs are common remedies to cure a variety of illnesses. According to the National Center for Biotechnology Information, 70% to 80% of the world's population prefer traditional medicines for treatment. In addition, personal consumption of traditional drugs has been reported to have increased to $ 7.5 billion. This increasing demand will further drive the growth of the industry between 2020 and 2026.

Increasing awareness of the benefits of Chinese herbs is expected to be another prominent factor that can develop the global Chinese herbs market over the next period. Chinese herbs do not contain chemicals. Therefore, the population will prefer them, and the Chinese herbal medicine market will grow in size within the projected time. Moreover, they are also cheap.


Opportunity

The Ministry of AYUSH can also assist companies seeking to sell their products abroad. That requirement can be a tedious process, as mentioned above. It can be simplified by the intervention of the ministry and the approach to other countries. As a proactive measure, the government recently introduced economic stimulus measures under Atmanirbhar Bharat Abhiyan, allocating 4,000 crore ($ 535 million) to the herb sector to promote herb cultivation. The bill aims to cover 10 hectares (24.7 acres) of herbal cultivation in two years.


NK_2021


Tags:- 

#DetailedProjectReport   #businessconsultant #BusinessPlan  

#feasibilityReport #NPCS #industrialproject #Entrepreneurindia #HerbalIndustry 


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Amla (Gooseberry) Fruit or Indian Gooseberry Plantation
Amla (Gooseberry) Fruit or Indian Gooseberry Plantation

We all are familiar of the fruit called Amla (Gooseberry). It is very commonly found in India, Ceylon, Malaya and China. It is very important fru... Read More

Capacity : 20,000 Kg. / Annum
Plant and Machinery cost: 2.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):35.00 %
TCI :10.00 Lakhs
Cost of Project : 10.00Lakhs
Add To Inquiry Basket
Ayurvedic Pharmacy
Ayurvedic Pharmacy

The contribution of thousands of medical luminances has been completed in the ayurvedic system to make it as one of the most wide as well as perfec... Read More

Capacity : 25 days/month
Plant and Machinery cost: 22.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):51.00%
Break Even Point (BEP):30.00 %
TCI :171.00 Lakhs
Cost of Project : 171.00Lakhs
Add To Inquiry Basket
Extraction of Methi (Fenugreek) Seed
Extraction of Methi (Fenugreek) Seed

Methi Seeds are source of vitamins, minerals, proteins, fats, alkaloids etc. This robust herb (fig) has light green leaves, is 30 to 60 cm tall and... Read More

Capacity : 300.00 MT/Year
Plant and Machinery cost: 41.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):70.00 %
TCI :97.00 Lakhs
Cost of Project : 97.00Lakhs
Add To Inquiry Basket
Black Pepper Oil
Black Pepper Oil

The trade distinguishes between two principal types of pepper, viz., the black and the white both derived from the same plant piper nigrum L. (fam.... Read More

Capacity : 45000 Kg/Annum
Plant and Machinery cost: 55.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):69.00 %
TCI :148.00 Lakhs
Cost of Project : 148.00Lakhs
Add To Inquiry Basket
Herbal Natural Essential Oil (Super Critical Liquid Carbon Dioxide Process)
Herbal Natural Essential Oil (Super Critical Liquid Carbon Dioxide Process)

Herbs like pudina, Palmrosa, citronella etc. can be easily used for the steam distillation process for the distillation of essential oil, but tube ... Read More

Capacity : 51 Kgs/Day
Plant and Machinery cost: 76.00 Lakhs
Working Capital : 67.00
Rate of Return (ROR):15.48%
Break Even Point (BEP):69.75 %
TCI :190.00 Lakhs
Cost of Project : 190.00Lakhs
Add To Inquiry Basket
Medicinal Herbs Plantation
Medicinal Herbs Plantation

Herbs and plants have been used for medicinal purposes for thousands of year. Even with the revolution in antibiotics and other synthetic medicines... Read More

Capacity : 20 Tonnes/Annum
Plant and Machinery cost: 5.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):50.65%
Break Even Point (BEP):43.94 %
TCI :16.40 Lakhs
Cost of Project : 16.40Lakhs
Add To Inquiry Basket
Herbs Plantation (Medicinal)
Herbs Plantation (Medicinal)

Every herbal plant have its own specific use for the production of specific drugs from specific herb. It has large enduse in the pharmaceutical ind... Read More

Capacity : 20 MT/Annum
Plant and Machinery cost: 5.00 Lakhs
Working Capital : 2.00
Rate of Return (ROR):48.65%
Break Even Point (BEP):46.13 %
TCI :17.00 Lakhs
Cost of Project : 17.00Lakhs
Add To Inquiry Basket
Sennosides from Senna Leaf
Sennosides from Senna Leaf
Sennosides from senna leaf owing to their cathartic and laxative properties are being used as laxative pills and their demand in medical field is incr... Read More
Capacity : 1500 kgs/Annum
Plant and Machinery cost: 7.20 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Moringa Leaf Powder Production Business
Moringa Leaf Powder Production Business

 

India is the prime producer of Moringa (Drumstick) with an annual production of... Read More

Capacity : Moringa Leaf Powder 1,000 Kg Per Day
Plant and Machinery cost: 55.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 189.00Lakhs
Add To Inquiry Basket
Production of Artemisinin  from Artemisia Annua Plant
Production of Artemisinin from Artemisia Annua Plant

 

Artemisia annua be... Read More

Capacity : Artemisinin (10 ml Size Pack) 3,000.0 Bottles Per Day
Plant and Machinery cost: 134.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):70.80 %
TCI :0.00 Lakhs
Cost of Project : 574.00Lakhs
Add To Inquiry Basket
Extraction of Artemisinin from Artemisia Annua Plant Biotechnological Approaches for Artemisinin Production
Extraction of Artemisinin from Artemisia Annua Plant Biotechnological Approaches for Artemisinin Production

 

Antimalarial medi... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business Plan for Calcium Sennoside from Senna Leaves Production
Business Plan for Calcium Sennoside from Senna Leaves Production

Introduction... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Herbal/Ayurvedic Hand Sanitizer
Herbal/Ayurvedic Hand Sanitizer

Ayurvedic Herbal Hand Sanitizers provides an effective and convenient way to clean your hands when soaps and water are... Read More

Capacity : Herbal/Ayurvedic Hand Sanitizer (100 ml Size each): 20,000 Bottles / day
Plant and Machinery cost: 14.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):36.00 %
TCI :0.00 Lakhs
Cost of Project : 724.00Lakhs
Add To Inquiry Basket
Camphor Tablet (Synthetic)
Camphor Tablet (Synthetic)

Camphor Tablet is one of the most common forms of camphor available in the market. Its main use is in religious purpos... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Ark of Ajwain, Pudina, Saunf & Gulab (Extracts of Carom Seeds, Mint, Fennel & Rose)
Ark of Ajwain, Pudina, Saunf & Gulab (Extracts of Carom Seeds, Mint, Fennel & Rose)

Ajwain (Carom Seeds)

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Moringa Oleifera (Drumstick) Powder
Moringa Oleifera (Drumstick) Powder

Moringa or drum sticks is among the well-known vegetables being used in our food during its availability. It is common... Read More

Capacity : 2000 Kgs./day
Plant and Machinery cost: 38.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):72.00 %
TCI :0.00 Lakhs
Cost of Project : 92.00Lakhs
Add To Inquiry Basket
Herbal Products (Amla, Triphala, and Tooth Powder)  Herbal Pellet (Tablet)  Herbal Oil (Hair Oil and Skin Oil)
Herbal Products (Amla, Triphala, and Tooth Powder) Herbal Pellet (Tablet) Herbal Oil (Hair Oil and Skin Oil)

Herbal products are medicines derived from plants. They are used as supplements to improve health and wellbeing, and m... Read More

Capacity : Amla Powder (200 gms Per Pack) : 1000 Packs/Day Triphala Powder (200 gms Per Pack) : 1000 Packs/Da
Plant and Machinery cost: 28.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 295.00Lakhs
Add To Inquiry Basket
Eucalyptus Tree Plantation
Eucalyptus Tree Plantation

Eucalyptus is a genus of trees. There are over 700 species of eucalypts, and almost all of them are in Australia. Eucalypts can be found in almost ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Herbal Body Care Beauty Products (Herbal Body Wash, Shampoo, Hair Conditioners, Soaps, Lotions and Scrubs)
Herbal Body Care Beauty Products (Herbal Body Wash, Shampoo, Hair Conditioners, Soaps, Lotions and Scrubs)

Natural skin care uses topical creams and lotions made of ingredients available in nature. Much of the recent literature... Read More

Capacity : Herbal Body Care Beauty Products (Herbal Body Wash, Shampoo, Hair Conditioners, Soaps, Lotions and
Plant and Machinery cost: 65.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):35.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 542.00Lakhs
Add To Inquiry Basket
Ayurvedic Churna & Tablets (Ayurvedic herbal powder combinations)
Ayurvedic Churna & Tablets (Ayurvedic herbal powder combinations)

Ayurvedic medicine is a traditional type of medicine. It is now being recognized all over the world as one of the best type of medicine. It was ing... Read More

Capacity : Gastritis Sugar Coated Tablets :1000 Bottles/Day •Liver Tablets :1000 Bottles/Day •Panchsakara Churn
Plant and Machinery cost: 91.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.83%
Break Even Point (BEP):44.75 %
TCI :354.00 Lakhs
Cost of Project : 354.00Lakhs
Add To Inquiry Basket
Aloe Vera Gel & Powder
Aloe Vera Gel & Powder

Aloe vera gel is one of the products prepared from aloe  itself. Aloe vera gel has very good medicine for external use for sun b... Read More

Capacity : 50 kgs/Day
Plant and Machinery cost: 55.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):60.00 %
TCI :120.00 Lakhs
Cost of Project : 120.00Lakhs
Add To Inquiry Basket
Stevia Farming
Stevia Farming

The Stevia plant belongs to the Compositae (sunflower family of plants). Centuries ago, Natives of Paraguay used the leaves of this small, herbaceo... Read More

Capacity : 27 Kgs/Day
Plant and Machinery cost: 29.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.17%
Break Even Point (BEP):53.74 %
TCI :60.00 Lakhs
Cost of Project : 60.00Lakhs
Add To Inquiry Basket
Stevia Extract
Stevia Extract

Sweeteners are widely used both by consumers and by the food and beverage industry. Consumers use them as an ingredient in various food items and a... Read More

Capacity : 300 MT /Annum
Plant and Machinery cost: 4235.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):57.00 %
TCI :5962.00 Lakhs
Cost of Project : 5962.00Lakhs
Add To Inquiry Basket
STEVIA extract: Stevioside
STEVIA extract: Stevioside

PRODUCT PROFILE Stevioside is a high intensity sweetener 250300 times that of sucrose, intended to be used in a wide range of low or reduced calori... Read More

Capacity :
Plant and Machinery cost: 84.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):56.00 %
TCI :274.00 Lakhs
Cost of Project : 274.00Lakhs
Add To Inquiry Basket
ALOE VERA CULTIVATION & EXTRACTION
ALOE VERA CULTIVATION & EXTRACTION
Aloe Vera belongs to the family liliacae and is mainly cultivated for its thick fleshy leaves. There are 300 known species of Aloe Vera in the world o... Read More
Capacity : 550 Kgs./Day (Aloe Vera Gel)
Plant and Machinery cost: 75.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):48.00%
Break Even Point (BEP):44.00 %
TCI :161.00 Lakhs
Cost of Project : 161.00Lakhs
Add To Inquiry Basket
Henna Based Hair Dye(Black, Burgundy, Chasenut & Special Brown)
Henna Based Hair Dye(Black, Burgundy, Chasenut & Special Brown)

Henna leaves are abundantly used for making different type of colours. It has natural properties to produce colors and that characteristic is used ... Read More

Capacity : 30000 Kg/Year
Plant and Machinery cost: 5.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):47.00%
Break Even Point (BEP):45.00 %
TCI :34.00 Lakhs
Cost of Project : 34.00Lakhs
Add To Inquiry Basket
TOILET AND HERBAL SOAP
TOILET AND HERBAL SOAP

It goes without saying that soap is indispensable to our daily life. Accordingly, the manufacturing industry should continue to develop as one of t... Read More

Capacity : 1000 Kgs. / Day
Plant and Machinery cost: 13.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):37.00 %
TCI :112.00 Lakhs
Cost of Project : 112.00Lakhs
Add To Inquiry Basket
Manufacture of Celery Seed oil
Manufacture of Celery Seed oil

Celery, Apium graveolens L is cultivated for its seeds and essential oil. An improved method has been developed for maximum yield of essential oil ... Read More

Capacity : : 300 Kg celery seeds / batch & 4 batches a day i.e.1200 Kg celery seeds / day
Plant and Machinery cost: 25.00 Lakhs
Working Capital : 12.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
AMLA (Indian Gooseberry) HAIR OIL BASED ON VEGETABLE OIL
AMLA (Indian Gooseberry) HAIR OIL BASED ON VEGETABLE OIL

Now-a-days people are quite justified in paying unusual attention to the choice of the oils for dressing the hairs for toileting and before bathing... Read More

Capacity : 147 Kg./day
Plant and Machinery cost: 29.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):49.00%
Break Even Point (BEP):30.00 %
TCI :264.00 Lakhs
Cost of Project : 264.00Lakhs
Add To Inquiry Basket
GLASS BOTTLES FOR COSMETICS
GLASS BOTTLES FOR COSMETICS

Glass is so much a part of our daily life that we cannot imagine living without it. Glassware is used both by the consumer as well as by the Govern... Read More

Capacity : 1500 MT /Annum
Plant and Machinery cost: 91.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):71.00 %
TCI :193.00 Lakhs
Cost of Project : 193.00Lakhs
Add To Inquiry Basket
Pesticides From Neem Seeds & Leaves
Pesticides From Neem Seeds & Leaves

This is a medium sized free, with a clear bole of 10-25 and a girth of 6-8. Although described as evergreen in drier areas it becomes deciduous. It... Read More

Capacity : 1 Mt/Day
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):47.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Hair Dye Henna Based (Black, Burgundy, Chasetnut & Special Brown Colours)
Hair Dye Henna Based (Black, Burgundy, Chasetnut & Special Brown Colours)

Henna leaves are abundantly used for making different types of colours. It has natural properties to produce colours and that characteristics are u... Read More

Capacity : 7500.00 Kg/Annum
Plant and Machinery cost: 5.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):50.00 %
TCI :28.00 Lakhs
Cost of Project : 28.00Lakhs
Add To Inquiry Basket
Stevia Extract
Stevia Extract
From the most distant to most recent, sugar forms an indispensable constituent in food habit in human kind. The major source of sugar has long been fr... Read More
Capacity : 150000.00 KGS/annum
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 94.00
Rate of Return (ROR):63.00%
Break Even Point (BEP):29.00 %
TCI :170.00 Lakhs
Cost of Project : 170.00Lakhs
Add To Inquiry Basket
CURCUMIN FROM TURMERIC
CURCUMIN FROM TURMERIC

Turmeric (Curcuma longa) is native to Asia and India. The tuberous rhizomes or underground stems of turmeric are used from antiquity as condiments,... Read More

Capacity : 40.00 Kgs/Day
Plant and Machinery cost: 105.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):40.00 %
TCI :400.00 Lakhs
Cost of Project : 400.00Lakhs
Add To Inquiry Basket
Geraniol Derivative and Alcohol Extract Of a Pinene
Geraniol Derivative and Alcohol Extract Of a Pinene

Acrylic terpene (C10) and sesquiterpene (C15) hydrocarbons find little use in composition. They are relatively unstable, some have a slightly aggre... Read More

Capacity : 900 kgs/Day
Plant and Machinery cost: 29.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):76.00 %
TCI :188.00 Lakhs
Cost of Project : 188.00Lakhs
Add To Inquiry Basket
Aloevera Gel and Powder
Aloevera Gel and Powder
Aloevera Gel is one of the products prepared from aloe itself. Aloevera gel has very good medicine for external use for sun burning and pain killer. I... Read More
Capacity : 50 kgs/Day
Plant and Machinery cost: 49.00 Lakhs
Working Capital : 17.00
Rate of Return (ROR):41.46%
Break Even Point (BEP):42.14 %
TCI :95.00 Lakhs
Cost of Project : 95.00Lakhs
Add To Inquiry Basket
Hair Shampoo (Herbal)
Hair Shampoo (Herbal)

Soaps contain too much alkali which is bad for hair and scalp. Shampoos are safer, they are designed to clean the hair and scalp without seriously ... Read More

Capacity : 40 Ltrs./ Day
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Aloe Vera Gel & Powder
Aloe Vera Gel & Powder
Aloe vera gel is one of the products prepared from aloe itself. Aloe vera gel has very good medicine for external use for sun burning and pain killer... Read More
Capacity : 50kgs/Day
Plant and Machinery cost: 55.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.14%
Break Even Point (BEP):60.62 %
TCI :120.00 Lakhs
Cost of Project : 120.00Lakhs
Add To Inquiry Basket
Jatropha
Jatropha
Jatropha belonging to the family Euphorbia- case is multipurpose shrub of significant importance because of its several industries and medicinal uses.... Read More
Capacity : 80 kg /day
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):16.00%
Break Even Point (BEP):66.00 %
TCI :92.00 Lakhs
Cost of Project : 92.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Stevia Extract 500 kg /day 63.00 170.00
Moringa Tablets Manufactu... 0 0.00 0.00
Production of Herbal Ayur... 0 0.00 0.00
Ayurvedic Herbal Hand San... 1 0.00 0.00
Aloe Vera Gel and Powder ... 0 0.00 0.00
Homeo & Bio Medicines wit... 0 0.00 0.00
Curcumin Extraction Unit Curcumin Powder : 350 Kgs/day Turmeric Oil : 350 Kgs/day 27.00 1016.00
Neem Oil Neem Oil : 5 MT/Day, Neem Cake as By Product : 42 MT/Day 24.74 320.00
Perfumery Compounds (Frag... 41.00 453.00
Curcumin(Turmeric) The In... 23400 Kg/Annum, Curcumin 23400 kg/Annum, Turmeric oil 550 MT/ Annum, De-oiled turmeric powder 54.00 289.00
Integrated Unit (Herbal H... 0 43.00 737.00
RAJNIGANDHA & ROSE FLOWER... 33.33 Kgs. Rajnigandha Oil/Day, 400 ML Rose Oil/Day 55.00 108.00
ALOE VERA JUICE, GEL & PO... Juice – 750 MT/Annum,Gel – 300 MT/Annum, Powder – 75 MT/Annum 44.00 1.00
EXTRACTION OF OIL FROM AR... 1500 Kg. / Annum 43.00 146.00
ESSENTIAL OIL FROM FLOWER... 250 Grams Rose Oil / Day 57.00 75.00
PLANTATION OF MEDICINAL P... 8 Tons Aloe Vera Leaf / Acre 30.00 149.00
FRACTIONAL DISTILLATION O... 100 KGS/day 39.00 295.00
Herbal Hair Oil (Banphool... 14700 Bottles / day each 100 ml. Cap. 53.00 302.00
Opportunities in Producti... 0 0.00 0.00
Business Opportunities in... 13333 Bottles Per Day 32.00 293.00
Camphor Powder (Kapoor-Ka... Camphor Powder: 3000 Kgs / Day 26.00 459.00
Production of Ayurvedic ... 0 0.00 0.00
Start Camphor Manufacturi... 0 0.00 0.00
Calcium Sennoside and Its... 0 0.00 0.00
Herbal Products Manufactu... 0 0.00 0.00
Asafoetida (Hing) 0 0.00 0.00
Neem Oil (Cold Process) Neem Oil : 150 Kgs/Day Deoil Cake as by product : 1680 Kgs/Day 27.00 51.00
Eucalyptus Tree Plantatio... 0 0.00 0.00
Aloe Vera Gel and Powder Aloevera Gel : 90,000 Kgs/annum Aloevera Powder : 15,000 Kgs/annum 27.00 164.00
Herbal Wine Herbal Wine (750 ml Size Bottle): 800,000 Nos/annum 29.00 334.00
1234
« Back1 2Next »

Showing 61 - 99 of 99 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.