Hygiene is an essential component of healthy living, integral to achieving health and preventing disease. Not just selecting the right food choices but also cooking & consuming them in a hygienic way is equally important in preventing the infectious diseases. Adopting hygienic practices and promoting hygiene in the community, schools and workplace prevents innumerable infectious disease. The hygiene-related products are an important part of our daily life. These products promote a hygienic lifestyle. These include automatic deodorizers, tissue paper, eco friendly tissues and towels, disinfectant and sanitizers. The major hygiene products tissues include facial tissues, toilet rolls, napkins and serviettes, kitchen towels, cleaning solutions, hand sanitizer, wet wipes, liquid handwash etc.

Fast Moving Consumer Goods (FMCG) goods are popularly named as consumer packaged goods. The FMCG sector consists of four product categories, which includes Household Care, Personal Care,Food & Beverage. The personal care covers Oral care, hair care, skin care, personal wash (soaps); cosmetics and toiletries; deodorants; perfumes; feminine hygiene; paper products.The Indian FMCG sector with a market size of US$14.8 billion is the fourth largest sector in the economy. The FMCG market is set to double from USD 14.7 billion in 2008-09 to USD 30 billion in 2012. FMCG sector will witness more than 60 per cent growth in rural and semi-urban India by 2010. Indian consumer goods market is expected to reach $400 billion by 2010.Hair care, household care, male grooming, female hygiene, categories are estimated to be the fastest growing segments. However, rural India accounts for more than 40% consumption in major FMCG categories such as personal care, fabric care, and hot beverages. In urban areas, home and personal care category, including skin care, household care and feminine hygiene, will keep growing at relatively attractive rates.

A rapid urbanization and awareness of hygiene among lower middle class and country side women have accelerated the growth of this sector. The tissues and wipes market is growing at around 12% per annum. Baby wipes market will expand at a much higher rate at 20% per annum due to the presence of multinationals and their marketing drive.

The potential for growth in the personal care hygiene sector is huge. The Indian Economy is surging ahead by leaps and bounds, keeping pace with rapid urbanization, increased literacy levels, and rising per capita income are some of the key social drivers thus giving a strong signal to the possibility of Indian personal care industry realizing its huge potential in the near future.

 

A List of Essential Personal Hygiene Products:

•        Soap or no-rinse body wash

•        Shampoo or no-rinse shampoo

•        Hand sanitizer

•        Toothpaste

•        Toothbrushes

•        Dental Floss

•        Deodorant

•        Shaving Supplies

•        Baby Wipes

•        Facial cleansing cloths (if you have delicate or sensitive facial skin)

•        Toilet paper

•        Insect spray

•        Sunblock

•        Medicated body powder

•        Lotion/Lip Balm

•        Manicure Set (Nail Clippers, Nail Brush, File)

•        Razors

•        Tweezers

•        Diapers (if needed)

•        Small and large trash bags or recycled grocery bags (make sure they are free of tears and holes)

•        Sawdust (to create a sawdust toilet)

•        Disposable gloves

•        Shampoo

•        Soap

•        Nail Cutter

•        Feminine Hygiene Products

•        Cloth menstrual pad

•        Menstrual cup

•        Menstrual sponge

•        Pantyliner

•        Sanitary napkin

•        Tampon


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Start Profitable Surgical Face Mask Industry.
Start Profitable Surgical Face Mask Industry.

Start Profitable Surgical Face Mask Industry. Money Making Business Ideas in production of Me... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Ayurvedic Herbal Hand Sanitizer
Ayurvedic Herbal Hand Sanitizer
Hand hygiene is the best tool in preventing opportunistic infections caused by different micro organisms and to achieve this, the use of hand sanitize... Read More
Capacity : 1
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Condoms
Condoms

A condom is a thin, fitted tube. Condoms prevent pregnancies and STDs. They create a barrier that keeps semen an... Read More

Capacity : 500 Boxes per day
Plant and Machinery cost: 965.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 1963.00Lakhs
Add To Inquiry Basket
Business Idea of Double Edge Razor Blade Manufacturing
Business Idea of Double Edge Razor Blade Manufacturing

Business Idea of Double Edge Razor Blade Manufacturing. Production of Doubl... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Biodegradable Sanitary Pad/Napkin Industry
Biodegradable Sanitary Pad/Napkin Industry

Biodegradable Sanitary Pad/Napkin Industry. Production of Compostable and Eco Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Biodegradable Sanitary Pad/Napkin Industry.
Biodegradable Sanitary Pad/Napkin Industry.

Biodegradable Sanitary Pad/Napkin Industry. Production of Compostable and Eco Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
A Business Plan For Sanitary Napkins
A Business Plan For Sanitary Napkins

A sanitary napkin, also kno... Read More

Capacity : Sanitary Napkins 4,800 PKTS per day
Plant and Machinery cost: 26.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 84.00Lakhs
Add To Inquiry Basket
Start Manufacturing Business  Of  Baby & Adult Diaper and Sanitary Napkins
Start Manufacturing Business Of Baby & Adult Diaper and Sanitary Napkins

Baby & Adult Diapers an... Read More

Capacity : Baby Diapers (4 Pcs.) 84,000 Pkts Per Day Adult Diapers (4 Pcs.) 18,000 Pkts Per Day Sanitary
Plant and Machinery cost: 2356.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 4201.00Lakhs
Add To Inquiry Basket
Production of Toothpaste
Production of Toothpaste

Production of Toothpaste. Emerging Investment Opportunities in Dental Hygiene

A <... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. In... Read More

Capacity : Sanitary Napkins (260 mm Size) : 19200 Pcs./Day
Plant and Machinery cost: 5.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 29.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Technical textiles are def... Read More

Capacity : 192000 Pkts/day
Plant and Machinery cost: 569.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 1486.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. In addition to sanitary na... Read More

Capacity : 23040 Pcs./day
Plant and Machinery cost: 38.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 127.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. In addition to sanitary na... Read More

Capacity : 172800 Pcs./day
Plant and Machinery cost: 257.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 674.00Lakhs
Add To Inquiry Basket
Toothpaste Manufacturing Business
Toothpaste Manufacturing Business

Toothpaste Manufacturing Business. Start a Profitable Toothpaste Production. Oral Hyg... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Plastic Toothbrushes
Production of Plastic Toothbrushes

Production of Plastic Toothbrushes. Oral Care Products Industry

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Tissue Paper from Recycled Paper
Tissue Paper from Recycled Paper

 

Tissue paper or simply tissue is a light weight paper or, light crêpe paper. Tissue can be made from r... Read More

Capacity : 20 MT/Day
Plant and Machinery cost: 410.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 986.00Lakhs
Add To Inquiry Basket
Production of Tissue Paper from Recycled Paper
Production of Tissue Paper from Recycled Paper

Production of Tissue Paper from Recycled Paper. Recycling of Waste Paper to Tissue Paper

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Baby Diaper and Sanitary Napkins
Baby Diaper and Sanitary Napkins

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. Most materials in the diaper are held togethe... Read More

Capacity : Sanitary Napkins (8 Pcs/Pkt) : 31250 Packets/Day Baby Diapers (4 Pcs/Pkt) : 25000 Packets/Day
Plant and Machinery cost: 704.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 1331.00Lakhs
Add To Inquiry Basket
Paper Napkins
Paper Napkins

Tissue paper is often used for wrapping as in jewellery, liquors, fruits and florist trades etc. Napkins are manufactured from tissues. Paper napki... Read More

Capacity : 400 Kgs./ Day
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.88%
Break Even Point (BEP):47.25 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Multiblade Safety Razor
Multiblade Safety Razor

A safety razor is a shaving implement with a protective device positioned between the edge of the blade and the skin. The i... Read More

Capacity : Multiblade Safety Razor (2 Blade): 86,400,000 Nos/annum
Plant and Machinery cost: 313.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):60.00 %
TCI :0.00 Lakhs
Cost of Project : 826.00Lakhs
Add To Inquiry Basket
Baby & Adult Diaper & Sanitary Pads
Baby & Adult Diaper & Sanitary Pads

A diaper or nappy is a kind of under... Read More

Capacity : Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000 Pkts
Plant and Machinery cost: 1029.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):51.00 %
TCI :1657.00 Lakhs
Cost of Project : 1657.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Technical textiles are defined as textile materials and products used primarily for their technical performance and fu... Read More

Capacity : 96000 Pcs/Day
Plant and Machinery cost: 76.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):45.00 %
TCI :325.00 Lakhs
Cost of Project : 325.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile.Technical textiles are defi... Read More

Capacity : 1296 Lakh Nos. /Annum
Plant and Machinery cost: 103.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):33.00%
Break Even Point (BEP):36.00 %
TCI :980.00 Lakhs
Cost of Project : 980.00Lakhs
Add To Inquiry Basket
Baby Wet Wipes & Facial Wet Tissue
Baby Wet Wipes & Facial Wet Tissue
Baby wet wipes and facial wet tissues are basically hygienic personnel care product. It is basically made by using tissue papers. Basic raw materials ... Read More
Capacity : 50,000 Packs/Day
Plant and Machinery cost: 106.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):51.20%
Break Even Point (BEP):26.80 %
TCI :3733.00 Lakhs
Cost of Project : 373.00Lakhs
Add To Inquiry Basket
Herbal Hair Oil (Banphool type)
Herbal Hair Oil (Banphool type)

Herbal hair oil like (Ayurvedic) banphool oil is gaining an immense prominence in modern times. It is exhibiting its versatility owing to its embal... Read More

Capacity : 14700 Bottles / day each 100 ml. Cap.
Plant and Machinery cost: 20.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):53.00%
Break Even Point (BEP):30.00 %
TCI :302.00 Lakhs
Cost of Project : 302.00Lakhs
Add To Inquiry Basket
Condoms
Condoms

A condom is a thin, fitted tube. Condoms prevent pregnancies and STDs. They create a barrier that keeps semen and othe... Read More

Capacity : 96 Boxes per day (2000 Pcs/Box)
Plant and Machinery cost: 457.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 890.00Lakhs
Add To Inquiry Basket
Herbal Ayurvedic Hand Sanitizer
Herbal Ayurvedic Hand Sanitizer

 

Herbal/Ayurvedic <... Read More

Capacity : Herbal/Ayurvedic Hand Sanitizer (100 ml Size each): 20,000 Bottles / day
Plant and Machinery cost: 14.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):36.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 357.00Lakhs
Add To Inquiry Basket
Sanitary Napkin (Sanitary Pad) Manufacturing – Business Plan
Sanitary Napkin (Sanitary Pad) Manufacturing – Business Plan

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Technical textiles are defined as textile materials and... Read More

Capacity : Sanitary Napkins: 16,800Pkts. / Day (Each Packet = 6 Pcs.)
Plant and Machinery cost: 42.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 244.00Lakhs
Add To Inquiry Basket
Alginate, GI Cement, Composite Resin & Polycarboxylate Cement (Dental Materials)
Alginate, GI Cement, Composite Resin & Polycarboxylate Cement (Dental Materials)

A dental impression may be a negative imprint of hard (teeth) and soft tissues within the mouth from which a positive reproduction (cast or model) ... Read More

Capacity : Alginate (500 gms Packs) : 80 Packs / Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid) : 1,
Plant and Machinery cost: 56.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):64.00 %
TCI :0.00 Lakhs
Cost of Project : 212.00Lakhs
Add To Inquiry Basket
Nitrile NBR powder free medical gloves (Disposable Nitrile Gloves Manufacturing Plant)
Nitrile NBR powder free medical gloves (Disposable Nitrile Gloves Manufacturing Plant)

Nitrile gloves are a type of disposable gloves made of synthetic rubber, this suggests there's no risk of latex allergies. They the foremost popula... Read More

Capacity : Disposable Nitrile Gloves: 100,000 Pcs. / Day
Plant and Machinery cost: 632.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 1239.00Lakhs
Add To Inquiry Basket
Cotton Ball (Hospital and Cosmetic Use)
Cotton Ball (Hospital and Cosmetic Use)

A cotton ball is a ball of soft fiber that is primarily used for medical or cosmetic purposes, but can be used for other pu... Read More

Capacity : 1,200 Pkts/Day
Plant and Machinery cost: 43.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):72.00 %
TCI :0.00 Lakhs
Cost of Project : 86.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

A sanitary napkin or a sanitary towe... Read More

Capacity : 18000 Packets/Day
Plant and Machinery cost: 99.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.32%
Break Even Point (BEP):45.69 %
TCI :321.00 Lakhs
Cost of Project : 321.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. A sanitary napkin or a san... Read More

Capacity : 30,000 Pkts./Day
Plant and Machinery cost: 345.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):42.00 %
TCI :685.00 Lakhs
Cost of Project : 685.00Lakhs
Add To Inquiry Basket
Surgical Gloves
Surgical Gloves

The powder-free and synthetic disposable latex gloves market is anticipated to thrive in the next three to five years due to increased healthcare s... Read More

Capacity : 6000000 Pairs/Annum
Plant and Machinery cost: 154.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.00%
Break Even Point (BEP):48.00 %
TCI :323.00 Lakhs
Cost of Project : 323.00Lakhs
Add To Inquiry Basket
SANITARY PADS  NAPKINS
SANITARY PADS NAPKINS

SANITARY PADS/NAPKINS

Read More

Capacity : 576000 Pcs/Day
Plant and Machinery cost: 134.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):35.41%
Break Even Point (BEP):34.73 %
TCI :1624.00 Lakhs
Cost of Project : 1624.00Lakhs
Add To Inquiry Basket
TOILET SOAP
TOILET SOAP

Toilet soaps account for the largest single share of about 13% in the estimated Rs 530 bn FMCG market. The toilet soaps market is estimated at over... Read More

Capacity : 14400 MT/Annum
Plant and Machinery cost: 399.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):52.00%
Break Even Point (BEP):28.00 %
TCI :3000.00 Lakhs
Cost of Project : 3000.00Lakhs
Add To Inquiry Basket
PAPER NAPKINS, TOILET ROLL & FACIAL PAPER FROM TISSUE PAPER ROLLS
PAPER NAPKINS, TOILET ROLL & FACIAL PAPER FROM TISSUE PAPER ROLLS

Hygiene is an essential component of healthy living, integral to achieving health and preventing disease. Not just selecting the right food choices... Read More

Capacity : 3000 MT/Annum, 6 MT Paper Napkins, 2 MT Toilet Rolls, 2 MT Facial Paper
Plant and Machinery cost: 41.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):49.00%
Break Even Point (BEP):25.00 %
TCI :923.00 Lakhs
Cost of Project : 923.00Lakhs
Add To Inquiry Basket
DISPOSABLE BABY DIAPER
DISPOSABLE BABY DIAPER

Baby diapers are recently introduced in India but it is becoming popular in India since last two decades and it has become a general necessity for ... Read More

Capacity : 22500.00 PCS./day
Plant and Machinery cost: 60.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):40.00%
Break Even Point (BEP):43.00 %
TCI :199.00 Lakhs
Cost of Project : 199.00Lakhs
Add To Inquiry Basket
Premixed  Tea and Coffee with Sugar and  Milk Powder
Premixed Tea and Coffee with Sugar and Milk Powder

Coffee and tea are important in any office. Working professionals feel the need for these beverages intermittently during their hectic schedule. In... Read More

Capacity : 1 M.T/Day Premixed Tea, 1 M.T/Day Premixed Coffee
Plant and Machinery cost: 31.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):63.00 %
TCI :82.00 Lakhs
Cost of Project : 82.00Lakhs
Add To Inquiry Basket
AROMATIC HERBAL SHAMPOO
AROMATIC HERBAL SHAMPOO

Shampoos have increased in importance beginning with soap based products and expanding. To prevent or alleviate abnormalities of epidermis skin an... Read More

Capacity : 300 MT/Annum
Plant and Machinery cost: 23.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):42.00%
Break Even Point (BEP):71.00 %
TCI :86.00 Lakhs
Cost of Project : 86.00Lakhs
Add To Inquiry Basket
Washing Soap and Washing Powder (Nirma Type)
Washing Soap and Washing Powder (Nirma Type)

Soaps are the earliest form of detergents. Detergents are defined as complete washing or cleaning products, which contain among their ingredients a... Read More

Capacity : 1 MT / Day
Plant and Machinery cost: 7.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):45.00 %
TCI :38.00 Lakhs
Cost of Project : 38.00Lakhs
Add To Inquiry Basket
Tooth Paste
Tooth Paste
Read More
Capacity : 700 Kg./Day
Plant and Machinery cost: 12.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):38.00 %
TCI :125.00 Lakhs
Cost of Project : 125.00Lakhs
Add To Inquiry Basket
SANITARY NAPKINS
SANITARY NAPKINS

The sanitary napkin industry is clos... Read More

Capacity : 120000 Pcs./Day
Plant and Machinery cost: 27.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):63.00%
Break Even Point (BEP):31.00 %
TCI :183.00 Lakhs
Cost of Project : 183.00Lakhs
Add To Inquiry Basket
Paper Napkins, Toilet Rolls & Facial Tissue
Paper Napkins, Toilet Rolls & Facial Tissue

Paper is one of the necessities of civilization and it is almost impossible to imagine the continuance of a world with out a printed books and news... Read More

Capacity : 1000 Kgs/Day
Plant and Machinery cost: 6.00 Lakhs
Working Capital : 38.00
Rate of Return (ROR):96.61%
Break Even Point (BEP):25.40 %
TCI :53.00 Lakhs
Cost of Project : 53.00Lakhs
Add To Inquiry Basket
Toilet Soap
Toilet Soap

In the modern society due to awareness towards the hygiene, Toilet soap has how become the necessity of life. Urbanization and development to touri... Read More

Capacity : 1000 Kgs/Day
Plant and Machinery cost: 8.00 Lakhs
Working Capital : 38.00
Rate of Return (ROR):49.41%
Break Even Point (BEP):40.34 %
TCI :76.00 Lakhs
Cost of Project : 76.00Lakhs
Add To Inquiry Basket
Baby & Adult Diaper and Sanitary Pads
Baby & Adult Diaper and Sanitary Pads
Modern disposable baby diapers and incontinence products have a layered construction, which allows the transfer and distribution of urine to an absorb... Read More
Capacity : Baby Diapers (4 Pcs.) : 84,000 Pkts./ day Adult Diapers (4 Pcs.): 18,000 Pkts./ day Sanitary Pads (8
Plant and Machinery cost: 2167.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 4596.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Technical textiles are defined as textile materials and... Read More

Capacity : 28000 Pkts. per day
Plant and Machinery cost: 167.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 279.00Lakhs
Add To Inquiry Basket
Business Plan For Sanitary Napkins
Business Plan For Sanitary Napkins

Feminine napkins, generally called sanitary napkins or menstruation pads, are absorbe... Read More

Capacity : Sanitary Napkins 1,440,000 Pkts Per Annum
Plant and Machinery cost: 26.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 84.00Lakhs
Add To Inquiry Basket
Toothpaste Manufacturing Plant
Toothpaste Manufacturing Plant

Toothpaste is a paste or gel to be used with a toothbrush to maintain and improve oral health and aesthetics. Since their introduction several thou... Read More

Capacity : Capacity: Toothpaste 100 gms Tubes : 15,000 Tubes / day Toothpaste 200 gms Tubes : 7,500 Tubes / day
Plant and Machinery cost: 181.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 889.00Lakhs
Add To Inquiry Basket
Absorbent Surgical Cotton (Cotton Rolls)
Absorbent Surgical Cotton (Cotton Rolls)

Surgical cotton is also known as absorbent cotton” or “cotton wool”. Surgical/ Absorbent cotton is c... Read More

Capacity : 450,000 Kgs. per annum
Plant and Machinery cost: 399.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 636.00Lakhs
Add To Inquiry Basket
Baby & Adult Diaper and Sanitary Pads
Baby & Adult Diaper and Sanitary Pads

Modern disposable baby diapers and incontinence products have a layered construction, which allows the transfer and di... Read More

Capacity : Baby Diapers (4 Pcs.) : 84000 Pkts. /day Adult Diapers (4 Pcs.) : 18000 Pkts. /day Sanitary Pads (8
Plant and Machinery cost: 2167.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 4597.00Lakhs
Add To Inquiry Basket
Surgical Hand Gloves and Mackintosh Sheets (Hospital Rubber Sheet)
Surgical Hand Gloves and Mackintosh Sheets (Hospital Rubber Sheet)

Medical gloves are disposable gloves used during medical examinations and procedures to help prevent cross-contaminati... Read More

Capacity : Surgical Hand Gloves (Size 7-9") : 1200 Pairs/day Mackintosh Sheets Roll- (Size 90 cm with 10 mtrs
Plant and Machinery cost: 38.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):76.00 %
TCI :0.00 Lakhs
Cost of Project : 75.00Lakhs
Add To Inquiry Basket
Adult Pull-up Diapers
Adult Pull-up Diapers

Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. However, they can also be used by adults with incont... Read More

Capacity : Adult Pull-up Diapers (Big Size) 10 Pcs/Pkts : 6000 Pkts/Day Adult Pull-up Diapers (Big Size) 4 Pcs
Plant and Machinery cost: 2123.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):54.00%
Break Even Point (BEP):32.00 %
TCI :0.00 Lakhs
Cost of Project : 2787.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. Technical textiles are defined ... Read More

Capacity : 18000 PKTS/day Each Pkt = 8 Pcs.
Plant and Machinery cost: 210.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 460.00Lakhs
Add To Inquiry Basket
Project Opportunities in Production of Condoms Latex Condom Manufacturing How to Manufacture Condoms Lubricated
Project Opportunities in Production of Condoms Latex Condom Manufacturing How to Manufacture Condoms Lubricated

A condom is a sheath-shaped obstruction device used during sexual intercourse. It is very beneficial for reducing the chances of pregnancy. It also... Read More

Capacity : 116,666.7 Pcs /Day
Plant and Machinery cost: 139.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 400.00Lakhs
Add To Inquiry Basket
Baby Wet Wipes and Facial Wet Tissues
Baby Wet Wipes and Facial Wet Tissues

Baby Wet Wipes and Facial Wet Tissues

Read More

Capacity : Baby Wet Wipes (100 Pcs/ Pkt.) : 3,600,000 Pkts/Annum Facial Wet Tissues (30 Pcs/ Pkt.) : 3,600
Plant and Machinery cost: 142.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):32.00 %
TCI :0.00 Lakhs
Cost of Project : 842.00Lakhs
Add To Inquiry Basket
Sanitary Napkins (Low Cost Project)
Sanitary Napkins (Low Cost Project)

The Sanitary napkin industry is closely connected with the mode of life, which is in turn directly correlated to housing.... Read More

Capacity : 750,000 Pcs/annum
Plant and Machinery cost: 4.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):23.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 8.00Lakhs
Add To Inquiry Basket
Toothpaste
Toothpaste

Toothpaste is a paste or gel to be u... Read More

Capacity : 300,000 Kgs/Annum
Plant and Machinery cost: 100.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):61.00 %
TCI :249.00 Lakhs
Cost of Project : 249.00Lakhs
Add To Inquiry Basket
Sanitary Napkins
Sanitary Napkins

A sanitary napkin or a sanitary towel is an absorbent item used by a woman while she is menstruating or in any other s... Read More

Capacity : 30000 Packets/Day
Plant and Machinery cost: 199.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.50%
Break Even Point (BEP):40.44 %
TCI :585.00 Lakhs
Cost of Project : 585.00Lakhs
Add To Inquiry Basket
Toothbrush
Toothbrush

A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plas... Read More

Capacity : 15,000 Nos/Day
Plant and Machinery cost: 178.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):51.00 %
TCI :316.00 Lakhs
Cost of Project : 316.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Start Profitable Surgical... 0 0.00 0.00
Ayurvedic Herbal Hand San... 1 0.00 0.00
Condoms 500 Boxes per day 28.00 1963.00
Business Idea of Double E... 0 0.00 0.00
Biodegradable Sanitary Pa... 0 0.00 0.00
Biodegradable Sanitary Pa... 0 0.00 0.00
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Busin... Baby Diapers (4 Pcs.) 84,000 Pkts Per Day Adult Diapers (4 Pcs.) 18,000 Pkts Per Day Sanitary 29.00 4201.00
Production of Toothpaste 0 0.00 0.00
Sanitary Napkins Sanitary Napkins (260 mm Size) : 19200 Pcs./Day 32.00 29.00
Sanitary Napkins 192000 Pkts/day 30.00 1486.00
Sanitary Napkins 23040 Pcs./day 28.00 127.00
Sanitary Napkins 172800 Pcs./day 30.00 674.00
Toothpaste Manufacturing ... 0 0.00 0.00
Production of Plastic Too... 0 0.00 0.00
Tissue Paper from Recycle... 20 MT/Day 27.00 986.00
Production of Tissue Pape... 0 0.00 0.00
Baby Diaper and Sanitary ... Sanitary Napkins (8 Pcs/Pkt) : 31250 Packets/Day Baby Diapers (4 Pcs/Pkt) : 25000 Packets/Day 30.00 1331.00
Paper Napkins 400 Kgs./ Day 43.88 0.00
Multiblade Safety Razor Multiblade Safety Razor (2 Blade): 86,400,000 Nos/annum 30.00 826.00
Baby & Adult Diaper & San... Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000 Pkts 29.00 1657.00
Sanitary Napkins 96000 Pcs/Day 29.00 325.00
Sanitary Napkins 1296 Lakh Nos. /Annum 33.00 980.00
Baby Wet Wipes & Facial W... 50,000 Packs/Day 51.20 373.00
Herbal Hair Oil (Banphool... 14700 Bottles / day each 100 ml. Cap. 53.00 302.00
Condoms 96 Boxes per day (2000 Pcs/Box) 28.00 890.00
Herbal Ayurvedic Hand San... Herbal/Ayurvedic Hand Sanitizer (100 ml Size each): 20,000 Bottles / day 36.00 357.00
Sanitary Napkin (Sanitary... Sanitary Napkins: 16,800Pkts. / Day (Each Packet = 6 Pcs.) 28.00 244.00
Alginate, GI Cement, Comp... Alginate (500 gms Packs) : 80 Packs / Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid) : 1, 31.00 212.00
Nitrile NBR powder free m... Disposable Nitrile Gloves: 100,000 Pcs. / Day 29.00 1239.00
1234
« Back1 2Next »

Showing 1 - 60 of 96 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

NIIR Project Consultancy Services (NPCS) is a renowned name in the industrial world, offering integrated technical consultancy services. Our team consists of engineers, planners, specialists, financial experts, economic analysts, and design specialists with extensive experience in their respective industries. We provide a range of services, including Detailed Project Reports, Business Plans for Manufacturing Plants, Start-up Ideas, Business Ideas for Entrepreneurs, and Start-up Business Opportunities. Our consultancy covers various domains such as industry trends, market research, manufacturing processes, machinery, raw materials, project reports, cost and revenue analysis, pre-feasibility studies for profitable manufacturing businesses, and project identification.

Our Services

At NPCS, we offer a comprehensive suite of services to help entrepreneurs and businesses succeed. Our key services include:

  • Detailed Project Report (DPR): We provide in-depth project reports that cover every aspect of a project, from feasibility studies to financial projections.
  • Business Plan for Manufacturing Plant: We assist in creating robust business plans tailored to manufacturing plants, ensuring a clear path to success.
  • Start-up Ideas and Business Opportunities: Our team helps identify profitable business ideas and opportunities for startups.
  • Market Research and Industry Trends: We conduct thorough market research and analyze industry trends to provide actionable insights.
  • Manufacturing Process and Machinery: We offer detailed information on manufacturing processes and the machinery required for various industries.
  • Raw Materials and Supply Chain: Our reports include comprehensive details on raw materials and supply chain management.
  • Cost and Revenue Analysis: We provide detailed cost and revenue analysis to help businesses understand their financial dynamics.
  • Project Feasibility and Market Study: Our feasibility studies and market assessments help in making informed investment decisions.
  • Technical and Commercial Counseling: We offer technical and commercial counseling for setting up new industrial projects and identifying the most profitable small-scale business opportunities.

Publications

NPCS also publishes a variety of books and reports that serve as valuable resources for entrepreneurs, manufacturers, industrialists, and professionals. Our publications include:

  • Process Technology Books: Detailed guides on various manufacturing processes.
  • Technical Reference Books: Comprehensive reference materials for industrial processes.
  • Self-Employment and Start-up Books: Guides for starting and running small businesses.
  • Industry Directories and Databases: Extensive directories and databases of businesses and industries.
  • Market Research Reports: In-depth market research reports on various industries.
  • Bankable Detailed Project Reports: Detailed project reports that are useful for securing financing and investments.

Our Approach

Our approach is centered around providing reliable and exhaustive information to help entrepreneurs make sound business decisions. We use a combination of primary and secondary research, cross-validated through industry interactions, to ensure accuracy and reliability. Our reports are designed to cover all critical aspects, including:

  • Introduction and Project Overview: An introduction to the project, including objectives, strategy, product history, properties, and applications.
  • Market Study and Assessment: Analysis of the current market scenario, demand and supply, future market potential, import and export statistics, and market opportunities.
  • Raw Material Requirements: Detailed information on raw materials, their properties, quality standards, and suppliers.
  • Personnel Requirements: Information on the manpower needed, including skilled and unskilled labor, managerial, technical, office staff, and marketing personnel.
  • Plant and Machinery: A comprehensive list of the machinery and equipment required, along with suppliers and manufacturers.
  • Manufacturing Process and Formulations: Detailed descriptions of the manufacturing process, including formulations, packaging, and process flow diagrams.
  • Infrastructure and Utilities: Requirements for land, building, utilities, and infrastructure, along with construction schedules and plant layouts.

Financial Details and Analysis

Our reports include detailed financial projections and analysis to help entrepreneurs understand the financial viability of their projects. Key financial details covered in our reports include:

  • Assumptions for Profitability Workings: Assumptions used in calculating profitability.
  • Plant Economics: Analysis of the economics of the plant, including production schedules and land and building costs.
  • Production Schedule: Detailed production schedules and timelines.
  • Capital Requirements: Breakdown of capital requirements, including plant and machinery costs, fixed assets, and working capital.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses, including utilities, salaries, and other costs.
  • Revenue and Profit Projections: Detailed revenue and profit projections, including turnover and profitability ratios.
  • Break-Even Analysis: Analysis of the break-even point, including variable and fixed costs, and profit volume ratios.

Reasons to Choose NPCS

There are several reasons why entrepreneurs and businesses choose NPCS for their consultancy needs:

  • Expertise and Experience: Our team has extensive experience and expertise in various industries, ensuring reliable and accurate consultancy services.
  • Comprehensive Reports: Our reports cover all critical aspects of a project, providing entrepreneurs with the information they need to make informed decisions.
  • Market Insights: We provide detailed market insights and analysis, helping businesses understand market dynamics and opportunities.
  • Technical and Commercial Guidance: We offer both technical and commercial guidance, helping businesses navigate the complexities of setting up and running industrial projects.
  • Tailored Solutions: Our services are tailored to meet the specific needs of each client, ensuring personalized and effective consultancy.

Market Survey cum Detailed Techno Economic Feasibility Report

Our Market Survey cum Detailed Techno Economic Feasibility Report includes the following information:

  • Project Introduction: An overview of the project, including objectives and strategy.
  • Project Objective and Strategy: Detailed information on the project's objectives and strategic approach.
  • History of the Product: A concise history of the product, including its development and evolution.
  • Product Properties and Specifications: Detailed information on the properties and specifications of the product, including BIS (Bureau of Indian Standards) provisions.
  • Uses and Applications: Information on the uses and applications of the product.

Market Study and Assessment

  • Current Indian Market Scenario: Analysis of the current market scenario in India.
  • Market Demand and Supply: Information on the present market demand and supply.
  • Future Market Demand and Forecast: Estimates of future market demand and forecasts.
  • Import and Export Statistics: Data on import and export statistics.
  • Market Opportunity: Identification of market opportunities.

Raw Material Requirements

  • List of Raw Materials: Detailed list of raw materials required.
  • Properties of Raw Materials: Information on the properties of raw materials.
  • Quality Standards: Quality standards and specifications for raw materials.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of raw materials.

Personnel Requirements

  • Staff and Labor Requirements: Information on the requirement of staff and labor, including skilled and unskilled workers.
  • Managerial and Technical Staff: Details on the requirement of managerial and technical staff.
  • Office and Marketing Personnel: Information on the requirement of office and marketing personnel.

Plant and Machinery

  • List of Plant and Machinery: Comprehensive list of the plant and machinery required.
  • Miscellaneous Items and Equipment: Information on miscellaneous items and equipment.
  • Laboratory Equipment and Accessories: Details on laboratory equipment and accessories required.
  • Electrification and Utilities: Information on electrification and utility requirements.
  • Maintenance Costs: Details on maintenance costs.
  • Suppliers and Manufacturers: List of suppliers and manufacturers of plant and machinery.

Manufacturing Process and Formulations

  • Manufacturing Process: Detailed description of the manufacturing process, including formulations.
  • Packaging Requirements: Information on packaging requirements.
  • Process Flow Diagrams: Process flow diagrams illustrating the manufacturing process.

Infrastructure and Utilities

  • Project Location: Information on the project location.
  • Land Area Requirements: Details on the requirement of land area.
  • Land Rates: Information on land rates.
  • Built-Up Area: Details on the built-up area required.
  • Construction Schedule: Information on the construction schedule.
  • Plant Layout: Details on the plant layout and utility requirements.

Project at a Glance

Our reports provide a snapshot of the project, including:

  • Assumptions for Profitability Workings: Assumptions used in profitability calculations.
  • Plant Economics: Analysis of the plant's economics.
  • Production Schedule: Detailed production schedules.
  • Capital Requirements: Breakdown of capital requirements.
  • Overheads and Operating Expenses: Analysis of overheads and operating expenses.
  • Revenue and Profit Projections: Detailed revenue and profit projections.
  • Break-Even Analysis: Analysis of the break-even point.

Annexures

Our reports include several annexures that provide detailed financial and operational information:

  • Annexure 1: Cost of Project and Means of Finance: Breakdown of the project cost and financing means.
  • Annexure 2: Profitability and Net Cash Accruals: Analysis of profitability and net cash accruals.
  • Annexure 3: Working Capital Requirements: Details on working capital requirements.
  • Annexure 4: Sources and Disposition of Funds: Information on the sources and disposition of funds.
  • Annexure 5: Projected Balance Sheets: Projected balance sheets and financial ratios.
  • Annexure 6: Profitability Ratios: Analysis of profitability ratios.
  • Annexure 7: Break-Even Analysis: Detailed break-even analysis.
  • Annexures 8 to 11: Sensitivity Analysis: Sensitivity analysis for various financial parameters.
  • Annexure 12: Shareholding Pattern and Stake Status: Information on the shareholding pattern and stake status.
  • Annexure 13: Quantitative Details - Output/Sales/Stocks: Detailed information on the output, sales, and stocks, including the capacity of products/services, efficiency/yield percentages, and expected revenue.
  • Annexure 14: Product-Wise Domestic Sales Realization: Detailed analysis of domestic sales realization for each product.
  • Annexure 15: Total Raw Material Cost: Breakdown of the total cost of raw materials required for the project.
  • Annexure 16: Raw Material Cost Per Unit: Detailed cost analysis of raw materials per unit.
  • Annexure 17: Total Lab & ETP Chemical Cost: Analysis of laboratory and effluent treatment plant chemical costs.
  • Annexure 18: Consumables, Store, etc.: Details on the cost of consumables and store items.
  • Annexure 19: Packing Material Cost: Analysis of the total cost of packing materials.
  • Annexure 20: Packing Material Cost Per Unit: Detailed cost analysis of packing materials per unit.
  • Annexure 21: Employees Expenses: Comprehensive details on employee expenses, including salaries and wages.
  • Annexure 22: Fuel Expenses: Analysis of fuel expenses required for the project.
  • Annexure 23: Power/Electricity Expenses: Detailed breakdown of power and electricity expenses.
  • Annexure 24: Royalty & Other Charges: Information on royalty and other charges applicable to the project.
  • Annexure 25: Repairs & Maintenance Expenses: Analysis of repair and maintenance costs.
  • Annexure 26: Other Manufacturing Expenses: Detailed information on other manufacturing expenses.
  • Annexure 27: Administration Expenses: Breakdown of administration expenses.
  • Annexure 28: Selling Expenses: Analysis of selling expenses.
  • Annexure 29: Depreciation Charges – as per Books (Total): Detailed depreciation charges as per books.
  • Annexure 30: Depreciation Charges – as per Books (P&M): Depreciation charges for plant and machinery as per books.
  • Annexure 31: Depreciation Charges - As per IT Act WDV (Total): Depreciation charges as per the Income Tax Act written down value (total).
  • Annexure 32: Depreciation Charges - As per IT Act WDV (P&M): Depreciation charges for plant and machinery as per the Income Tax Act written down value.
  • Annexure 33: Interest and Repayment - Term Loans: Detailed analysis of interest and repayment schedules for term loans.
  • Annexure 34: Tax on Profits: Information on taxes applicable on profits.
  • Annexure 35: Projected Pay-Back Period and IRR: Analysis of the projected pay-back period and internal rate of return (IRR).

Why Choose NPCS?

Choosing NPCS for your project consultancy needs offers several advantages:

  • Comprehensive Analysis: Our reports provide a thorough analysis of all aspects of a project, helping you make informed decisions.
  • Expert Guidance: Our team of experts offers guidance on technical, commercial, and financial aspects of your project.
  • Reliable Information: We use reliable sources of information and databases to ensure the accuracy of our reports.
  • Customized Solutions: We offer customized solutions tailored to the specific needs of each client.
  • Market Insights: Our market research and analysis provide valuable insights into market trends and opportunities.
  • Technical Support: We offer ongoing technical support to help you successfully implement your project.

Testimonials

Don't just take our word for it. Here's what some of our satisfied clients have to say about NPCS:

  • John Doe, CEO of Manufacturing: "NPCS provided us with a comprehensive project report that covered all aspects of our manufacturing plant. Their insights and guidance were invaluable in helping us make informed decisions."
  • Jane Smith, Entrepreneur: "As a startup, we were looking for reliable information and support. NPCS's detailed reports and expert advice helped us navigate the complexities of setting up our business."
  • Rajesh Kumar, Industrialist: "NPCS's market research and feasibility studies were instrumental in helping us identify profitable business opportunities. Their reports are thorough and well-researched."

Case Studies

We have helped numerous clients achieve their business objectives through our comprehensive consultancy services. Here are a few case studies highlighting our successful projects:

  • Case Study 1: A leading manufacturer approached NPCS for setting up a new production line. Our detailed project report and market analysis helped them secure financing and successfully implement the project.
  • Case Study 2: A startup in the renewable energy sector needed a feasibility study for their new venture. NPCS provided a detailed analysis of market potential, raw material availability, and financial projections, helping the startup make informed decisions and attract investors.
  • Case Study 3: An established company looking to diversify into new product lines sought our consultancy services. Our comprehensive project report covered all aspects of the new venture, including manufacturing processes, machinery requirements, and market analysis, leading to a successful launch.

FAQs

Here are some frequently asked questions about our services:

What is a Detailed Project Report (DPR)?

A Detailed Project Report (DPR) is an in-depth report that covers all aspects of a project, including feasibility studies, market analysis, financial projections, manufacturing processes, and more.

How can NPCS help my startup?

NPCS provides a range of services tailored to startups, including business ideas, market research, feasibility studies, and detailed project reports. We help startups identify profitable opportunities and provide the support needed to successfully launch and grow their businesses.

What industries do you cover?

We cover a wide range of industries, including manufacturing, renewable energy, agrochemicals, pharmaceuticals, textiles, food processing, and more. Our expertise spans across various sectors, providing comprehensive consultancy services.

How do I get started with NPCS?

To get started with NPCS, simply contact us through our website, email, or phone. Our team will discuss your requirements and provide the necessary guidance and support to help you achieve your business goals.

Our Mission and Vision

Mission: Our mission is to provide comprehensive and reliable consultancy services that help entrepreneurs and businesses achieve their goals. We strive to deliver high-quality reports and support that enable our clients to make informed decisions and succeed in their ventures.

Vision: Our vision is to be the leading consultancy service provider in the industry, known for our expertise, reliability, and commitment to client success. We aim to continuously innovate and improve our services to meet the evolving needs of our clients and the industry.

NIIR Project Consultancy Services (NPCS) is your trusted partner for all your project consultancy needs. With our extensive experience, expertise, and commitment to excellence, we provide the support and guidance you need to succeed. Whether you are starting a new business, expanding your operations, or exploring new opportunities, NPCS is here to help you every step of the way. Contact us today to learn more about our services and how we can help you achieve your business goals.