India is rich in natural resources. Minerals constitute the back-bone of economic growth of any nation and India has been eminently endowed with this gift of nature. There is much evidence that exploitation of minerals like coal, iron-ore, copper, lead-zinc has been going on in the country from time immemorial.  Natural stones like granite and marble are capable of taking a high polish and are therefore used as decorative stones for cladding purpose in the construction industry, as well as for monumental and memorial work. Marble carries a status symbol of luxury and it gives a long-term benefit to one who has purchased it. This is so because it is a very durable stone. The marble tiles can be used for indoor and outdoor decorations of your home. Floors, countertops, fireplaces, porticos of large or small buildings can be made elegant and luxuriant by marble. Large buildings, monuments, mansions, multi-storied buildings make use of this stone for adding that elegant decorative touch.

Since granite is a hard rock, special grinding and polishing heads are used for rapidly grinding and polishing the slabs of granite. For polishing soft stones like marble, it is necessary to have a complete surface to surface contact of the abrasive and marble. The basic principle of polishing any natural stone is to hone the surface of the stone by progressively using finer mesh of abrasives until the natural luster of the stone is obtained. A polished piece of natural stone is capable of reflecting a major portion of the light falling on it. In most modem stone processing plants, bonded abrasives are used for grinding and polishing natural stones. India is largely self sufficient in most of the minerals which include barytes, bauxite, chromite, dolomite, fluorspar, gypsum, iron ore, kyanite, limestone, manganese ore, magnesite, sillimanite, etc. except the minerals like copper, asbestos, lead and zinc, natural phosphates, sulphur and crude petroleum, in which domestic production meets the demand only partially.

India has one of the largest reserves of granite in the world and exported Rs 2,600 crore (Rs 26 billion) worth of the stone last year. Granite exports this fiscal are expected to touch Rs 2,800 crore (Rs 28 billion) and nearly one-fourth of these exports is accounted for by monument stones.

Indian granite exports have declined 33 per cent between 2006-07 and 2008-09. The sector, which relies heavily on American and European demand, was among the first to feel the heat of the sub-prime crisis. Its export revenues fell steeply in 2007-08, even before there were visible signs of a slowdown in Indian housing and industry. What perhaps explains the increase in volumes in 2007-08 is that polished granite, which commands a better price, was substituted by semi-finished blocks. Yet, prices in the latter category remained unattractive, reflecting the severity of the recession. Volumes increased by 10.2 per cent in 2007-08 over the previous year, while revenue earned from exports decreased by 17.6 per cent this year. The decline in export earnings and volumes was more pronounced in 2008-09. The export of polished granites blocks and slabs more than halved in 2008-09 at 2.75 lakh tonnes compared with 5.52 lakh tonnes in 2007, while in 2007-08 it was 4.13 lakh tonnes. Export revenue in this segment declined 51.9 per cent – more than the sector as a whole – to Rs 862.63 crore 2008-09 from Rs 1,791.98 crore in 2006-07. In 2007-08, it was Rs 1,332.56 crore. However, the export of semi-finished blocks to China has not been as badly affected. The export volumes of crude or roughly trimmed granite increased to 25.63 lakh tonnes in 2008 from 21.47 lakh tonnes in 2007. In 2009, it declined to 23.92 lakh tonnes. Exports revenue largely remained flat at Rs 1478.95 crore in 2009, compared with RS 1479.44 crore in 2008. In 2007, it was Rs 1703.37 crore. Granite accounts for 10 per cent of India’s minerals’ output. Over the last three decades the Indian granite industry has modernized to global standards. Sculptures and monuments made in India are being exported all over the world.

About 85-90 per cent of the total granite production in the country is for exports. So after this recession period over the industry will again regain its demand .This is the best time for an entrepreneur to venture into this sector.

Coming to gypsum products in India, gypsum has proved to be a miraculous material aiding interior construction. Gypsum surface plaster is one form that has caught the attention on the sector and is growing in popularity. In recent years, the construction sector has witnessed a number of new trends, technology advancements and innovations across applications, all aimed at making construction faster and delivering higher performance. The industry of cement and gypsum products in India is the second biggest manufacturer of high grade cement in the whole world. The cement and gypsum products industry in India consists of over 300 small cement plants and around 130 large cement plants with the total production capacity of more than 167.36 million tons. The different varieties of cement manufactured in India are Oil Well cement, White cement, Portland Pozzolana cement, and Ordinary Portland cement.

Some of international companies having presence in cement and gypsum products industry in India are: Lafarge, Italcementi, Heidelberg Cements, and Holcim.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Aluminium From Bauxite of Gibbsite Variety
Aluminium From Bauxite of Gibbsite Variety

Residual rocks, in which the alumina trihydrate and monohydrate minerals gibbsite, boehmite, and diaspore predominate are classified as bauxite. Ot... Read More

Capacity : 20000 MT/Annum
Plant and Machinery cost: 615.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):17.00%
Break Even Point (BEP):54.00 %
TCI :1875.00 Lakhs
Cost of Project : 1875.00Lakhs
Add To Inquiry Basket
Granite Tiles, Slab and Monuments
Granite Tiles, Slab and Monuments

Granite Slab and Tiles are mainly used for wall paneling and facades. Today in Europe and in Western Countries and in India, architect and builders... Read More

Capacity : 1000.00 Tiles/Day & 100 Monument/Day, 5 Slab/Day
Plant and Machinery cost: 182.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):45.00 %
TCI :488.00 Lakhs
Cost of Project : 488.00Lakhs
Add To Inquiry Basket
Bitumen Emulsion for Road (Cationic Type)
Bitumen Emulsion for Road (Cationic Type)

Bitumen Emulsion is one kind of speciality chemicals which has large commercial uses as coating material in the road construction and many other co... Read More

Capacity : 5 MT/Day
Plant and Machinery cost: 18.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):50.34%
Break Even Point (BEP):73.35 %
TCI :44.00 Lakhs
Cost of Project : 44.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Its outstanding con... Read More

Capacity : Gypsum Plaster Board (Wall and Top Ceiling): 2,000,000 Sq.mt. per Annum
Plant and Machinery cost: 315.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 916.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Its outstanding con... Read More

Capacity : 40000 Sq.mt. per day
Plant and Machinery cost: 944.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 1835.00Lakhs
Add To Inquiry Basket
Start Quartz Slabs Manufacturing Business
Start Quartz Slabs Manufacturing Business

Quartz is the most plentifu... Read More

Capacity : 250 Nos. per day
Plant and Machinery cost: 1600.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 3200.00Lakhs
Add To Inquiry Basket
Mining of Mineral Ore with Processing and Beneficiation  for Production of Red Iron Oxide
Mining of Mineral Ore with Processing and Beneficiation for Production of Red Iron Oxide

Iron & steel is that the drive behind industrial development in any country. The vitality of the Iron & ... Read More

Capacity : Iron Ore: 2,400 MT / Day
Plant and Machinery cost: 527.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 1798.00Lakhs
Add To Inquiry Basket
Alumina from Bauxite
Alumina from Bauxite

Alumina from Bauxite. Extraction and Production of Alumina from Bauxite

<...
Read More
Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Quartz Slabs
Quartz Slabs

Quartz slab is basically used primarily for kitchen countertops. Engineered quartz is a manmade product created mostly... Read More

Capacity : Quartz Slabs (3250 x 1650 x 15 mm) : 125 Nos./Day
Plant and Machinery cost: 1100.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 2033.00Lakhs
Add To Inquiry Basket
Calcined & Activated Alumina
Calcined & Activated Alumina

Calcined Alumina

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Bentonite Clay Granules
Bentonite Clay Granules

Bentonite is a clay generated frequently from the alteration of volcanic ash, consisting predominantly of smectite min... Read More

Capacity : 288 MT/day
Plant and Machinery cost: 416.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 1228.00Lakhs
Add To Inquiry Basket
Bleaching Earth Manufacturing Business
Bleaching Earth Manufacturing Business

Bleaching Earth Manufacturing Business. Production of Bleaching Clay

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Alumina from Gibbsite Variety
Alumina from Gibbsite Variety

Alumina (aluminium oxide) is a white granular material produced from the refining of bauxite. Around 90 per cent of th... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Gypsum Mining for Production of Plaster of Paris Powder
Gypsum Mining for Production of Plaster of Paris Powder

Gypsum is a soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO4•2H2O. It is wide... Read More

Capacity : Gypsum Powder : 4800 MT/Day Plaster of Paris Powder : 7200 MT/Day
Plant and Machinery cost: 338700.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):16.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 394800.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Its outstanding contribu... Read More

Capacity : 50000 Sq.mt./Day
Plant and Machinery cost: 1605.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):32.00 %
TCI :0.00 Lakhs
Cost of Project : 12502.00Lakhs
Add To Inquiry Basket
Global Countertop Demand is forecast to rise 2.3% yearly through 2021
Global Countertop Demand is forecast to rise 2.3% yearly through 2021

Global Countertop Demand is forecast to rise 2.3% yearly through 2021: Manufacturing Business of Quartz Slabs, Eng... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Quartz Slabs
Quartz Slabs

Engineered stone is a composite material made of crushed stone bound together by an adhesive, (most commonly polymer resin, with some newer version... Read More

Capacity : Quartz Slabs (760 x 2440 x 15 mm):60 Nos/Day
Plant and Machinery cost: 101.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.58%
Break Even Point (BEP):51.79 %
TCI :350.00 Lakhs
Cost of Project : 350.00Lakhs
Add To Inquiry Basket
SYNTHETIC RUTILE FROM ILMENITE
SYNTHETIC RUTILE FROM ILMENITE
Titanium is relatively abundant in the earth’s crust, which is usually found in igneous and metamorphic rocks as ilmenite (FeTiO3), rutile (TiO2) an... Read More
Capacity :
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):1.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
MARBLE AND ONYX
MARBLE AND ONYX

Marble is a non-foliated metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or dolomite. Geologists use the term... Read More

Capacity :
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):1.00%
Break Even Point (BEP):1.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Magnesium Oxide (Specially Light Grade) from Dolomite
Magnesium Oxide (Specially Light Grade) from Dolomite

Magnesium oxide, or magnesia is a white solid mineral that occurs naturally as periclase and is a source of magnesium. It has empirical formula of ... Read More

Capacity : 48 MT/Day
Plant and Machinery cost: 2700.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):34.00 %
TCI :6650.00 Lakhs
Cost of Project : 6650.00Lakhs
Add To Inquiry Basket
BENEFICIATION OF CHROMIUM, NICKEL AND MANGANESE ORE
BENEFICIATION OF CHROMIUM, NICKEL AND MANGANESE ORE

Chromium is the 21st most abundant metal in the Earths crust. The only commercial ore of chromium is the chromite. Most chromite ores are rich enou... Read More

Capacity : 30,000 MT/ Annum each ores
Plant and Machinery cost: 896.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):45.00%
Break Even Point (BEP):49.00 %
TCI :3528.00 Lakhs
Cost of Project : 3528.00Lakhs
Add To Inquiry Basket
FERROALLOYS OF NIOBIUM, MOLYBDENUM, TITANIUM, TUNGSTEN AND VANADIUM
FERROALLOYS OF NIOBIUM, MOLYBDENUM, TITANIUM, TUNGSTEN AND VANADIUM

Ferroalloys are the principal alloying agents in iron and steel production. Addition of ferro alloys improves mechanical and physical properties of... Read More

Capacity : 5 MT/Day
Plant and Machinery cost: 200.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):50.00%
Break Even Point (BEP):41.00 %
TCI :500.00 Lakhs
Cost of Project : 500.00Lakhs
Add To Inquiry Basket
Salt Glazed Stoneware Pipes & Fittings
Salt Glazed Stoneware Pipes & Fittings

Stoneware pipes are used in sewerage lines. It is covered under the heading Structural Clay Product, which include the various items like building ... Read More

Capacity : 12 MT/day
Plant and Machinery cost: 31.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):45.00 %
TCI :126.00 Lakhs
Cost of Project : 126.00Lakhs
Add To Inquiry Basket
Marble Granite Cutting & Polishing Unit
Marble Granite Cutting & Polishing Unit

It is an important structural & ornamental stone because of its higher compressive strength & durability, is extensively used for massive s... Read More

Capacity : 30000 Sq. Mtr./Annum
Plant and Machinery cost: 196.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):46.00%
Break Even Point (BEP):78.00 %
TCI :293.00 Lakhs
Cost of Project : 293.00Lakhs
Add To Inquiry Basket
Iodized Salt (Free Flowing)
Iodized Salt (Free Flowing)

Salt is a basic food element of all human beings. Due to its widespread use all over the world and also due to the increasing demand for refined, i... Read More

Capacity : 6000 Ton/Annum (Iodized Salt Free Flowing)
Plant and Machinery cost: 76.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):39.00%
Break Even Point (BEP):50.00 %
TCI :293.00 Lakhs
Cost of Project : 293.00Lakhs
Add To Inquiry Basket
Zeolite 4A
Zeolite 4A

Zeolite 4A is manufactured synthetically from zeolite A or NaA. It is basically products of pore openings by using calcium ions in the sodium zeoli... Read More

Capacity : 2.0 MT/Day
Plant and Machinery cost: 126.00 Lakhs
Working Capital : 99.00
Rate of Return (ROR):61.88%
Break Even Point (BEP):44.17 %
TCI :296.00 Lakhs
Cost of Project : 296.00Lakhs
Add To Inquiry Basket
Start Quartz Slabs Manufacturing Business A Lucrative Business Plan
Start Quartz Slabs Manufacturing Business A Lucrative Business Plan

 

Introduct... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
A Business Plan  For Tantalum Powder from Tantalite Ore
A Business Plan For Tantalum Powder from Tantalite Ore

Tantalum is a rare transition metal that is mined from columbite-tantalite, which is an ore found in vari... Read More

Capacity : Tantalum Powder 4 MT Per Day
Plant and Machinery cost: 235.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 1935.00Lakhs
Add To Inquiry Basket
Manufacturing of Red Iron Oxide (With Mining of Mineral Ore  Along with Processing and Beneficiation)
Manufacturing of Red Iron Oxide (With Mining of Mineral Ore Along with Processing and Beneficiation)

Iron (III) oxide or ferric oxide is that the inorganic compound with the formula Fe2O3. it's one in every of the... Read More

Capacity : Red Iron Oxide : 4,000 MT / Day
Plant and Machinery cost: 1096.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 4391.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board (Wall and Top Ceiling)
Gypsum Plaster Board (Wall and Top Ceiling)

Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Its outstanding con... Read More

Capacity : Gypsum Plaster Board (Wall and Top Ceiling) : 8000000 Sq.mt./Annum
Plant and Machinery cost: 805.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 1497.00Lakhs
Add To Inquiry Basket
Limestone Powder
Limestone Powder

Limestone Powder is used in more daily products than one might think. Limestone Powder is a sedimentary rock, formed b... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Roasted Bentonite Granules Manufacturing Industry
Roasted Bentonite Granules Manufacturing Industry

Roasted Bentonite Granules Manufacturing Industry. Bentonite Clay Granules. Bentonite... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Feldspar
Feldspar

Feldspar is the name given to a group of minerals distinguished by the presence of alumina and silica (SiO2) in their chemistry. This group include... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Bentonite Clay Granules
Bentonite Clay Granules

Bentonite is clay generated frequently from the alteration of volcanic ash, consisting predominantly of smectite miner... Read More

Capacity : 144 MT/day
Plant and Machinery cost: 63.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 445.00Lakhs
Add To Inquiry Basket
Granite & Marble Chips
Granite & Marble Chips

Granite is a common type of felsic intrusive igneous rock that is granular and phaneritic in texture. Granites can be ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
ZIRCON
ZIRCON

Zircon is ubiquitous in the crust of Earth. It occurs as a common accessory mineral in igneous rocks (as primary... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum board, also known as “drywall” or “plaster board,” consists of a core of gyp... Read More

Capacity : Gypsum Plaster Board (Size 2440x1220x12 mm) :10000 Sq.Mt./day
Plant and Machinery cost: 549.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):21.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 3188.00Lakhs
Add To Inquiry Basket
Bleaching Earth
Bleaching Earth

Bleaching earth consists primarily of hydrous aluminium silicates (clay minerals) of varying composition. Common components are montmorillonite, ka... Read More

Capacity : 20MT/Day
Plant and Machinery cost: 72.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.38%
Break Even Point (BEP):44.37 %
TCI :712.00 Lakhs
Cost of Project : 712.00Lakhs
Add To Inquiry Basket
Neutralization of Phospho-Gypsum
Neutralization of Phospho-Gypsum

Phospho-gypsum is a by-product of the phosphoric acid industry and consists of 65-70 % gypsum, 25-30 % water and 5-10 % impurities, i.e. phosphoric... Read More

Capacity : 600000 MT/annum
Plant and Machinery cost: 1008.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):36.89%
Break Even Point (BEP):43.92 %
TCI :3114.00 Lakhs
Cost of Project : 3114.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum board, also known as drywall or plaster board, consists of a core of gypsum surrounded with a paper covering. Several varieties of gypsum bo... Read More

Capacity : 6600 No.s/day
Plant and Machinery cost: 192.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.11%
Break Even Point (BEP):61.30 %
TCI :551.00 Lakhs
Cost of Project : 551.00Lakhs
Add To Inquiry Basket
GLASS BEADS MANUFACTURING
GLASS BEADS MANUFACTURING

A unified system of classifying glasses used in the production of imitation jewellery has been produced. Glass bead is a handicraft item produced ... Read More

Capacity : 1500 MT / Annum
Plant and Machinery cost: 102.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):56.00 %
TCI :222.00 Lakhs
Cost of Project : 222.00Lakhs
Add To Inquiry Basket
Ferrosilicon
Ferrosilicon

Ferroalloys are used in making alloy steels and castings of different special types as addition agents. Ferro alloys are usually made in electric-a... Read More

Capacity : 10 MT/Day
Plant and Machinery cost: 79.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):56.00%
Break Even Point (BEP):46.00 %
TCI :386.00 Lakhs
Cost of Project : 386.00Lakhs
Add To Inquiry Basket
CALCIUM CARBONATE FROM LIME STONE
CALCIUM CARBONATE FROM LIME STONE

Calcium compounds such as calcium carbonate, calcium phosphate and calcium sulphate are widely distributed in nature. Calcium carbonate, CaCO3, for... Read More

Capacity : 20 MT/Day
Plant and Machinery cost: 64.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):81.00%
Break Even Point (BEP):33.00 %
TCI :200.00 Lakhs
Cost of Project : 200.00Lakhs
Add To Inquiry Basket
Calcined Bauxite
Calcined Bauxite

The industry grow steadily based soundly on new and expanding markets created largely by its own study of the properties of aluminium and of the av... Read More

Capacity : 20000 MT/Annum
Plant and Machinery cost: 615.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):22.00%
Break Even Point (BEP):61.00 %
TCI :1898.00 Lakhs
Cost of Project : 1898.00Lakhs
Add To Inquiry Basket
EDTA and Its Salts
EDTA and Its Salts

E.D.T.A. and Its Salts

E.D.T.A. and its salts used in any chemical industry as a ch... Read More

Capacity : 700 Kgs./ Day
Plant and Machinery cost: 12.00 Lakhs
Working Capital : 26.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :100.00 Lakhs
Cost of Project : 100.00Lakhs
Add To Inquiry Basket
Vermiculite
Vermiculite

Vermiculite is compound of hydrated magnesium iron aluminium silicate. It is rarely available in India. Say almost nil. It is naturally available i... Read More

Capacity : 5 MT Vermiculite/Day
Plant and Machinery cost: 28.00 Lakhs
Working Capital : 20.00
Rate of Return (ROR):65.00%
Break Even Point (BEP):53.00 %
TCI :150.00 Lakhs
Cost of Project : 150.00Lakhs
Add To Inquiry Basket
Soda Ash
Soda Ash

Soda ash is a chemical trade name donated by the anhydrous sodium carbonate, or simply “Soda”. The dehydrate variet... Read More

Capacity : 500000 MT/Annum
Plant and Machinery cost: 30550.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):42.00 %
TCI :42100.00 Lakhs
Cost of Project : 42100.00Lakhs
Add To Inquiry Basket
Calcium Carbonate from Marble Chips
Calcium Carbonate from Marble Chips

Marble is metamorphic, calcium carbonate of ultrafine, crystalline structure. It is used as building and ornamental stone (chips), artifical stone,... Read More

Capacity : 10.00 MT/Day
Plant and Machinery cost: 119.00 Lakhs
Working Capital : 69.00
Rate of Return (ROR):27.68%
Break Even Point (BEP):59.04 %
TCI :314.00 Lakhs
Cost of Project : 314.00Lakhs
Add To Inquiry Basket
Granite Marble Cutting and Polishing Unit
Granite Marble Cutting and Polishing Unit

The use of granite and other decorative stones has been increasing world over. India is endowed with vast deposits of these natural resources and i... Read More

Capacity : 100 Sq. M./Day
Plant and Machinery cost: 168.00 Lakhs
Working Capital : 151.00
Rate of Return (ROR):47.73%
Break Even Point (BEP):42.87 %
TCI :388.00 Lakhs
Cost of Project : 388.00Lakhs
Add To Inquiry Basket
Iodized Salt
Iodized Salt

Salt was the name originally given to the residue left by evaporation of sea water. Iodizing salt for human consumption is a modern trend. Iodine i... Read More

Capacity : 20 Tons/Day
Plant and Machinery cost: 36.00 Lakhs
Working Capital : 24.00
Rate of Return (ROR):61.19%
Break Even Point (BEP):45.87 %
TCI :91.00 Lakhs
Cost of Project : 91.00Lakhs
Add To Inquiry Basket
India High Silica Quartz Grit Market
India High Silica Quartz Grit Market

High silica quartz is a type of quartz that contains at least 97% SiO2. It is one of the most abundant minerals on Ear... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start Manufacturing Business  Manganese From Manganese Ore
Start Manufacturing Business Manganese From Manganese Ore

Manganese is a chemical ele... Read More

Capacity : Manganese Ingot 10 MT Per Day
Plant and Machinery cost: 666.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 2192.00Lakhs
Add To Inquiry Basket
Sulphur Milling Plant
Sulphur Milling Plant

Sulfur is utilized in the manufacturing processes of sulfurous gas, sulfite, sulfuric and sulphydric acids, carbon sul... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Calcium Carbonate Production
Calcium Carbonate Production

Calcium Carbonate Production. Activated Calcium Carbonate (ACC) and Precipitated Calc... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Bauxite Calcination Plant by Rotary Kiln with Fine Grinding Ball Mill
Bauxite Calcination Plant by Rotary Kiln with Fine Grinding Ball Mill

Bauxite Calcination Plant by Rotary Kiln with Fine Grinding Ball Mill. Refractory Gra... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Bauxite Calcination (by Rotary Kiln with Fine Grinding Ball Mill)
Bauxite Calcination (by Rotary Kiln with Fine Grinding Ball Mill)

Calcined bauxite is an important raw material for two main markets: refractories and abrasives. Bauxite is a naturally occurring, heterogeneous mat... Read More

Capacity : 40 MT/day
Plant and Machinery cost: 219.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 766.00Lakhs
Add To Inquiry Basket
Hematite from Iron Ore, Lumps
Hematite from Iron Ore, Lumps

Hematite is one of the most abundant minerals on Earth's surface and in the shallow crust. It is an iron oxide with a chemical composition of Fe2O3... Read More

Capacity : Hematite:120 MT/Day
Plant and Machinery cost: 416.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.11%
Break Even Point (BEP):51.00 %
TCI :1081.00 Lakhs
Cost of Project : 1081.00Lakhs
Add To Inquiry Basket
Precipitated Calcium Carbonate
Precipitated Calcium Carbonate

Sizing Precipitated Calcium Carbonate (PCC)—also known as purified, refined or synthetic calcium carbonate. It has the same chem... Read More

Capacity : 25 MT/Day
Plant and Machinery cost: 715.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):20.65%
Break Even Point (BEP):52.58 %
TCI :1138.00 Lakhs
Cost of Project : 1138.00Lakhs
Add To Inquiry Basket
CALCINED BAUXITE
CALCINED BAUXITE

Calcined bauxite is an important raw material for two main markets: refractories and abrasives. Smaller volumes are consumed in other applications ... Read More

Capacity : 60,000 MT/Annum
Plant and Machinery cost: 438.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):63.00 %
TCI :1214.00 Lakhs
Cost of Project : 1214.00Lakhs
Add To Inquiry Basket
CHROMITE BENEFICIATION PLANT
CHROMITE BENEFICIATION PLANT

Chromite is an oxide of chromium and iron. The chemical composition of chromite is FeO.Cr2O3 or FeCr2O4. Chromite is the only commercial source of ... Read More

Capacity : 18,000 MT/Annum Chromite Concentrate
Plant and Machinery cost: 110.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):41.00%
Break Even Point (BEP):65.00 %
TCI :366.00 Lakhs
Cost of Project : 366.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Aluminium From Bauxite of... 20000 MT/Annum 17.00 1875.00
Granite Tiles, Slab and M... 1000.00 Tiles/Day & 100 Monument/Day, 5 Slab/Day 44.00 488.00
Bitumen Emulsion for Road... 5 MT/Day 50.34 44.00
Gypsum Plaster Board Gypsum Plaster Board (Wall and Top Ceiling): 2,000,000 Sq.mt. per Annum 27.00 916.00
Gypsum Plaster Board 40000 Sq.mt. per day 27.00 1835.00
Start Quartz Slabs Manufa... 250 Nos. per day 27.00 3200.00
Mining of Mineral Ore wit... Iron Ore: 2,400 MT / Day 30.00 1798.00
Alumina from Bauxite 0 0.00 0.00
Quartz Slabs Quartz Slabs (3250 x 1650 x 15 mm) : 125 Nos./Day 28.00 2033.00
Calcined & Activated Alum... 0 0.00 0.00
Bentonite Clay Granules 288 MT/day 28.00 1228.00
Bleaching Earth Manufactu... 0 0.00 0.00
Alumina from Gibbsite Var... 0 0.00 0.00
Gypsum Mining for Product... Gypsum Powder : 4800 MT/Day Plaster of Paris Powder : 7200 MT/Day 16.00 394800.00
Gypsum Plaster Board 50000 Sq.mt./Day 34.00 12502.00
Global Countertop Demand ... 0 0.00 0.00
Quartz Slabs Quartz Slabs (760 x 2440 x 15 mm):60 Nos/Day 26.58 350.00
SYNTHETIC RUTILE FROM ILM... 1.00 0.00
MARBLE AND ONYX 1.00 0.00
Magnesium Oxide (Speciall... 48 MT/Day 45.00 6650.00
BENEFICIATION OF CHROMIUM... 30,000 MT/ Annum each ores 45.00 3528.00
FERROALLOYS OF NIOBIUM, M... 5 MT/Day 50.00 500.00
Salt Glazed Stoneware Pip... 12 MT/day 44.00 126.00
Marble Granite Cutting & ... 30000 Sq. Mtr./Annum 46.00 293.00
Iodized Salt (Free Flowin... 6000 Ton/Annum (Iodized Salt Free Flowing) 39.00 293.00
Zeolite 4A 2.0 MT/Day 61.88 296.00
Start Quartz Slabs Manufa... 0 0.00 0.00
A Business Plan For Tant... Tantalum Powder 4 MT Per Day 28.00 1935.00
Manufacturing of Red Iron... Red Iron Oxide : 4,000 MT / Day 31.00 4391.00
Gypsum Plaster Board (Wal... Gypsum Plaster Board (Wall and Top Ceiling) : 8000000 Sq.mt./Annum 28.00 1497.00
1234
« Back1 2Next »

Showing 1 - 60 of 107 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

 

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report,  Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

 


And before diversifying/venturing into any product, wish to study the following aspects of the identified product:


• Good Present/Future Demand
• Export-Import Market Potential
• Raw Material & Manpower Availability
• Project Costs and Payback Period


We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

 

The report contains all the data which will help an entrepreneur find answers to questions like:

• Why I should invest in this project?
• What will drive the growth of the product?
• What are the costs involved?
• What will be the market potential?


The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product.

The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.


Reasons for buying the report:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.

• This report provides vital information on the product like its definition, characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

 

Our Approach:


• Our research reports broadly cover Indian markets, present analysis, outlook and forecast.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players. 

• We use reliable sources of information and databases.  And information from such sources is processed by us and included in the report.

 

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

 

 

Ø  Introduction

·         Project Introduction

·         Project Objective and Strategy

·         Concise History of the Product

·         Properties

·         BIS (Bureau of Indian Standards) Provision & Specification

·         Uses & Applications

 

Ø  Market Study and Assessment

·         Current Indian Market Scenario

·         Present Market Demand and Supply

·         Estimated Future Market Demand and Forecast

·         Statistics of Import & Export

·         Names & Addresses of Existing Units (Present Players)

·         Market Opportunity

 

Ø  Raw Material

·         List of Raw Materials

·         Properties of Raw Materials

·         Prescribed Quality of Raw Materials

·         List of Suppliers and Manufacturers

 

Ø  Personnel (Manpower) Requirements

·         Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

 

Ø  Plant and Machinery

·         List of Plant & Machinery

·         Miscellaneous Items

·         Appliances & Equipments

·         Laboratory Equipments & Accessories

·         Electrification

·         Electric Load & Water

·         Maintenance Cost

·         Sources of Plant & Machinery (Suppliers and Manufacturers)

 

Ø  Manufacturing Process and Formulations

·         Detailed Process of Manufacture with Formulation

·         Packaging Required

·         Process Flow Sheet Diagram

 

Ø  Infrastructure and Utilities

·         Project Location

·         Requirement of Land Area

·         Rates of the Land

·         Built Up Area

·         Construction Schedule

·         Plant Layout and Requirement of Utilities

 

Project at a Glance

Along with financial details as under:

 

  •     Assumptions for Profitability workings

  •    Plant Economics

  •    Production Schedule

  •    Land & Building

            Factory Land & Building

            Site Development Expenses

  •    Plant & Machinery

             Indigenous Machineries

            Other Machineries (Miscellaneous, Laboratory etc.)

  •    Other Fixed Assets

            Furniture & Fixtures

            Pre-operative and Preliminary Expenses

            Technical Knowhow

            Provision of Contingencies

  •   Working Capital Requirement Per Month

             Raw Material

            Packing Material

            Lab & ETP Chemical Cost

           Consumable Store

  •   Overheads Required Per Month And Per Annum

         Utilities & Overheads (Power, Water and Fuel Expenses etc.)

             Royalty and Other Charges

            Selling and Distribution Expenses

  •    Salary and Wages

  •    Turnover Per Annum

  •   Share Capital

            Equity Capital

            Preference Share Capital

 

  •    Annexure 1:: Cost of Project and Means of Finance

  •    Annexure 2::  Profitability and Net Cash Accruals

                Revenue/Income/Realisation

                Expenses/Cost of Products/Services/Items

                Gross Profit

                Financial Charges     

                Total Cost of Sales

                Net Profit After Taxes

                Net Cash Accruals

  •   Annexure 3 :: Assessment of Working Capital requirements

                Current Assets

                Gross Working. Capital

                Current Liabilities

                Net Working Capital

                Working Note for Calculation of Work-in-process

  •    Annexure 4 :: Sources and Disposition of Funds

  •    Annexure 5 :: Projected Balance Sheets

                ROI (Average of Fixed Assets)

                RONW (Average of Share Capital)

                ROI (Average of Total Assets)

  •    Annexure 6 :: Profitability ratios

                D.S.C.R

                Earnings Per Share (EPS)

               

             Debt Equity Ratio

        Annexure 7   :: Break-Even Analysis

                Variable Cost & Expenses

                Semi-Var./Semi-Fixed Exp.

                Profit Volume Ratio (PVR)

                Fixed Expenses / Cost 

                B.E.P

  •   Annexure 8 to 11:: Sensitivity Analysis-Price/Volume

            Resultant N.P.B.T

            Resultant D.S.C.R

   Resultant PV Ratio

   Resultant DER

  Resultant ROI

          Resultant BEP

  •    Annexure 12 :: Shareholding Pattern and Stake Status

        Equity Capital

        Preference Share Capital

  •   Annexure 13 :: Quantitative Details-Output/Sales/Stocks

        Determined Capacity P.A of Products/Services

        Achievable Efficiency/Yield % of Products/Services/Items 

        Net Usable Load/Capacity of Products/Services/Items   

       Expected Sales/ Revenue/ Income of Products/ Services/ Items   

  •    Annexure 14 :: Product wise domestic Sales Realisation

  •    Annexure 15 :: Total Raw Material Cost

  •    Annexure 16 :: Raw Material Cost per unit

  •    Annexure 17 :: Total Lab & ETP Chemical Cost

  •    Annexure 18  :: Consumables, Store etc.,

  •    Annexure 19  :: Packing Material Cost

  •    Annexure 20  :: Packing Material Cost Per Unit

  •    Annexure 21 :: Employees Expenses

  •    Annexure 22 :: Fuel Expenses

  •    Annexure 23 :: Power/Electricity Expenses

  •    Annexure 24 :: Royalty & Other Charges

  •    Annexure 25 :: Repairs & Maintenance Exp.

  •    Annexure 26 :: Other Mfg. Expenses

  •    Annexure 27 :: Administration Expenses

  •    Annexure 28 :: Selling Expenses

  •    Annexure 29 :: Depreciation Charges – as per Books (Total)

  •   Annexure 30   :: Depreciation Charges – as per Books (P & M)

  •   Annexure 31   :: Depreciation Charges - As per IT Act WDV (Total)

  •   Annexure 32   :: Depreciation Charges - As per IT Act WDV (P & M)

  •   Annexure 33   :: Interest and Repayment - Term Loans

  •   Annexure 34   :: Tax on Profits

  •   Annexure 35   ::Projected Pay-Back Period And IRR