Rock Sand - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
PROJECT DESCRIPTION
Natural or River sand are weathered and worn out particles of rocks and are of various grades or sizes depending upon the amount of wearing. Now-a-days good sand is not readily available; it is transported from a long distance. Those resources are also exhausting very rapidly. The artificial sand produced by proper machines can be a better substitute to river sand. The sand must be of proper gradation. The sand should be sharp, clean and course. The grains should be of durable material. The grain sizes must be such that it should give minimum voids.
There is standard specification for Fine aggregates (Sand). It is divided in four gradations. Generally known as Zone I, Zone II, Zone III and Zone IV. There is sieve Designation for each grade. There are testing sieves for testing the sand. A set of Sieves with square hole is available. Followings are the sieves 4.75 mm,2.365,1.1830,600 microns,300 microns,150 microns pan Specific percentage are designated for each size for each Zone sand in terms of material retained or passed 'from the sieves.
The Indian economy has witnessed considerable progress in the past few decades. Most of the infrastructure development sectors moved forward, but not to the required extent of increasing growth rate up to the tune of 8 to 10 per cent. The Planning Commission has estimated that investment requirement in infrastructure to the tune of about INR14,50,000 crore or US$320 billion during the 11th Five Year Plan period. The infrastructure, industrial and commercial construction markets collectively accounted for 74.2% of the total Indian construction industry in 2012. Consequently, the contribution of these three markets will be significant to the overall Indian construction industry growth over the forecast period. The Indian construction industry’s output is expected to record a CAGR of 15.45% over the forecast period. Any new entrant can successfully venture in to this field.
| Plant capacity |
Plant & machinery |
Working capital |
Cost of Project |
T.C.I |
Return |
Break even |
| 9 Lakh MT/Annum |
Rs. 707 Lakhs |
- |
106700000 |
Cost of Project : Rs. 1067 Lakhs |
25.00 |
48.00 |
