To this extent, the data has provided entrepreneurs and investors with some sectors to consider that are highly potential depending on the comparative advantage of Kerala. They include;
1. Indonesia’s increase in packaged foods, healthcare, digital services, and wellness tourism purchases fueled by increased purchasing power i.e. the country’s growing middle-class population were the countries that purchased more of the products and services in the prior period.
2. Thailand’s extract-based growth including seafood, spiced, and rubber at an export orientation i.e. the country prepared for the post-pandemic upsurge in demand and integration into the international market.
3. Rising demand from various countries for wellness tourism and ecotourism, which could reflect in supplements or expeditions if products are supplements and cross-border or domestic in the others.
4. The endorsement of crisis recovery and economic development leads to increased demand for travel.
5. Growth in domestic demand for eco, bio, and context-based foods and environmentally friendly production lines. Many companies turned to energy obtained from renewable sources.
The following are offered by the Government of Kerala:
To sum up, Kerala is undeniably a synthesis of natural endowments, manpower, policy support, and potential for sustainable development. Be it agro-processing through tourism and wellness to information technology, health care, and renewable energy, investable opportunities in the low-risk state are bound to result in high rewards. Gunning for the future through its industrial policy and infrastructure and grounded on sustainability, Kerala is a venerable among India’s foremost hopefuls concerning the corruption of entrepreneurship and innovation and industrialization.
Please choose a project below related to this category.
The Sanitary napkin industry is closely connected with the mode of life, which is in turn directly correlated to housing. Accordingly this industry ha...
|
Capacity : 750,000 Pcs/annum |
Plant and Machinery cost: Rs 4 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 23.00 |
|
Break Even Point (BEP): 68.00 |
TCI : Cost of Project : Rs 8lakhs |
|
Cost of Project : 800000 |
Button Mushroom is the most popular mushroom variety grown and consumed the world over. In India, its production earlier was limited to the winter sea...
|
Capacity : 150,000Kgs/annum |
Plant and Machinery cost: Rs 86 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 1.00 |
TCI : Cost of Project : Rs 164 lakhs |
|
Cost of Project : 16400000 |
A sock is an item of clothing worn on the feet and often covering the ankle or some part of the calf. The foot is among the heaviest producers of swea...
|
Capacity : Sweat Free &Anitbacterial Socks:450,000 Pairs/annum |
Plant and Machinery cost: Rs 42 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 66.00 |
TCI : Cost of Project: Rs 161 lakhs |
|
Cost of Project : 16100000 |
Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nitrog...
|
Capacity : Micronutrient Fertilizer for Fruits: 187,500 Kgs/annum Micronutrient Fertilizer for Vegetables: 112,500 Kgs/annum |
Plant and Machinery cost: Rs 23 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 76.00 |
TCI : Cost of Project: Rs 114 lakhs |
|
Cost of Project : 11400000 |
Paper cups and glasses are made in a variety of sizes and shapes according to the amount of material to be filled. They are designed and processed in...
|
Capacity : Paper Cups: 18,720,00 Pcs/annum Paper Plates: 21,600,000 Pcs/annum Corrugated Boxes: 1,800,000 Pcs/annum |
Plant and Machinery cost: Rs 46 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project: Rs 292 lakhs |
|
Cost of Project : 29200000 |
Tomato is one of the most important "protective foods" because of its special nutritive value. Tomato concentrate that contains no less than 7% but le...
|
Capacity : Tomato Puree: 600 MT/annum Tomato Concentrate: 300 MT/annum Mango Concentrate: 300 MT/annum Guava Concentrate: 300 MT/annum Amla Concentrate: 300 MT/annum |
Plant and Machinery cost: Rs 136 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs 521 lakhs |
|
Cost of Project : 52100000 |
A hose is a flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called pipes, or more generally tubin...
|
Capacity : Automobile AC Hose: 300,000 Nos/Annum Fuel Hose: 500,000 Nos/Annum Hydraulic Hose:500,000 Nos/Annum Petrol Pump Hose: 200,000 Nos/Annum Tyres : 450,000 Nos/Annum |
Plant and Machinery cost: Rs 1020 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project: Rs 2994 lakhs |
|
Cost of Project : 299400000 |
The alcohol industry is the commercial industry involved in the manufacturing, distribution, and sale of alcoholic beverages. Alcohol has assumed very...
|
Capacity : Extra Neutral Alcohol (ENA) : 15,000KLs/Annum Distilleries Dry Grain with Solubles (DDGS) by product: 7,350MT/Annum Fusel Oil (by product) : 24KLs/Ann |
Plant and Machinery cost: Rs 4637 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 24.00 |
|
Break Even Point (BEP): 48.00 |
TCI : Cost of Project: Rs 6572 lakhs |
|
Cost of Project : 657200000 |
Sheet metal is simply metal formed into thin and flat pieces. It is one of the fundamental forms used in metal working, and can be cut and bent into a...
|
Capacity : Auto Sheet Metal Components : 600MT/Annum Metal Scraps: 6MT/Annum |
Plant and Machinery cost: Rs 90 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project: Rs 176 lakhs |
|
Cost of Project : 17600000 |
A Carbon Fiber is a fibrous carbon material having a micro graphite crystal structure made by fibrillation of Acrylic resin, a well-known textile mate...
|
Capacity : 300,000 Kgs/Annum |
Plant and Machinery cost: Rs 111 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 61.00 |
TCI : Cost of Project : Rs 451 lakhs |
|
Cost of Project : 45100000 |
Polyaluminium chloride (PAC) is a general name given to polyaluminium chloride compounds, namely polyaluminium chloride hydroxide and polyaluminium ch...
|
Capacity : Poly Aluminium Chloride Liquid Form: 16,500 MT/Annum Poly Aluminium Chloride Powder Form: 13,500 MT/Annum |
Plant and Machinery cost: Rs 1266 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 55.00 |
TCI : Cost of Project: Rs 2418 lakhs |
|
Cost of Project : 241800000 |
Rice milling generates a byproduct known as husk. This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice, br...
|
Capacity : Precipitated Silica: 1200mt/annum Activated Carbon (by product): 336mt/annum Sodium Carbonate (by product): 504 mt/annum |
Plant and Machinery cost: Rs 556 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 1.00 |
TCI : Cost of Project : Rs 1200 lakhs |
|
Cost of Project : 120000000 |