To this extent, the data has provided entrepreneurs and investors with some sectors to consider that are highly potential depending on the comparative advantage of Kerala. They include;
1. Indonesia’s increase in packaged foods, healthcare, digital services, and wellness tourism purchases fueled by increased purchasing power i.e. the country’s growing middle-class population were the countries that purchased more of the products and services in the prior period.
2. Thailand’s extract-based growth including seafood, spiced, and rubber at an export orientation i.e. the country prepared for the post-pandemic upsurge in demand and integration into the international market.
3. Rising demand from various countries for wellness tourism and ecotourism, which could reflect in supplements or expeditions if products are supplements and cross-border or domestic in the others.
4. The endorsement of crisis recovery and economic development leads to increased demand for travel.
5. Growth in domestic demand for eco, bio, and context-based foods and environmentally friendly production lines. Many companies turned to energy obtained from renewable sources.
The following are offered by the Government of Kerala:
To sum up, Kerala is undeniably a synthesis of natural endowments, manpower, policy support, and potential for sustainable development. Be it agro-processing through tourism and wellness to information technology, health care, and renewable energy, investable opportunities in the low-risk state are bound to result in high rewards. Gunning for the future through its industrial policy and infrastructure and grounded on sustainability, Kerala is a venerable among India’s foremost hopefuls concerning the corruption of entrepreneurship and innovation and industrialization.
Please choose a project below related to this category.
A cold storage is a temperature-controlled supply chain network, with storage and distribution activities carried out in a manner such that the temper...
|
Capacity : Cold Storage (Fruits, Vegetables, Pulses & Spices Store): 5000 MT |
Plant and Machinery cost: Rs. 120 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 18.00 |
|
Break Even Point (BEP): 54.00 |
TCI : Cost of Project: Rs665 lakhs |
|
Cost of Project : 66500000 |
A solar panel is a collection of solar cells.Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar ph...
|
Capacity : Solar Panel: 25 MW |
Plant and Machinery cost: Rs. 161 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 54.00 |
|
Break Even Point (BEP): 28.00 |
TCI : Rs.804 lakhs |
|
Cost of Project : 80400000 |
Solar power is one of the most promising renewables. It is reliable and less vulnerable to changes in seasonal weather patterns. Hydrogen, in the capa...
|
Capacity : Solar Power: 1 MW |
Plant and Machinery cost: Rs. 411 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 1.00 |
TCI : Cost of Project: Rs.811 lakhs |
|
Cost of Project : 81100000 |
Ferromolybdenum alloys are principally produced commercially by thermite process by which ingots or buttons of the alloy can be produced. They impart...
|
Capacity : Ferro Molybdenum: 10 MT/Day |
Plant and Machinery cost: Rs. 135 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 31.00 |
|
Break Even Point (BEP): 68.00 |
TCI : Cost of Project: Rs776 lakhs |
|
Cost of Project : 77600000 |
Billets A semi-finished product obtained by forging, rolling or continuously casting, usually square (not exceeding 125 mm×125 mm in cross-section) wi...
|
Capacity : M.S. Billets (Size 80x80 mm to 140x140 mm): 180 MT/Day |
Plant and Machinery cost: Rs. 1565 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 63.00 |
TCI : Cost of Project: Rs. 3343 lakhs |
|
Cost of Project : 334300000 |
A thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled "Paint Thinner" are usually mineral s...
|
Capacity : Thinner (1 Ltrs Size): 4000 Bottles/Day Solvent Thinner (1 Ltrs Size): 4000 Bottles/Day |
Plant and Machinery cost: Rs 198 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 56.00 |
TCI : Cost of Project: Rs395 lakhs |
|
Cost of Project : 39500000 |
Dehydration process appears to be a variation on the air-drying process and is based on the principle of vapor pressure differentials, using air circu...
|
Capacity : Dehydrated Onion Sliced/Chopped: 300 MT/Annum Cattle Feed as by product: 210 MT/Annum |
Plant and Machinery cost: Rs. 69 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs199 lakhs |
|
Cost of Project : 19900000 |
This pre-feasibility report on Speciality/ Multi-speciality hospital consists of the feasibility detailing for three models of hospitals namely 30 bed...
|
Capacity : Super Speciality Hospital: 30 bedded |
Plant and Machinery cost: Rs. 113 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 61.00 |
TCI : Cost of Project: Rs. 978 lakhs |
|
Cost of Project : 97800000 |
A fastener is a connective mechanism that mechanically joins or affixes two ormore objects together. A bolt is an externally threaded fastener designe...
|
Capacity : Mild Steel/HT Bolts (DR M8-M16): 20 MT/Day Mild Steel/HT Nuts (DR M18-M30): 6 MT/Day |
Plant and Machinery cost: Rs. 378 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 55.00 |
TCI : Cost of Project: Rs.744 lakhs |
|
Cost of Project : 74400000 |
LPG cylinder filling plants vary considerably in size, complexity and layout. The type and size depends on such factors as maximum potential throughpu...
|
Capacity : LPG Cylinders (14.2 Kgs Size): 1000 Cylinders/Day LPG Cylinders (19 Kgs Size): 1000 Cylinders/Day |
Plant and Machinery cost: Rs.110 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 45.00 |
TCI : Cost of Project: Rs. 427 lakhs |
|
Cost of Project : 0 |
Biodegradable plastics are mainly derived from corn, wheat and potato starch. Biodegradable plastics products are thermoplastic materials which are pr...
|
Capacity : Bio-Plastic Glasses (wt. each Glass 16 gms): 62500 Pcs/Day Bio-Plastic Plates (wt. each Plate 40 gms): 25000 Pcs/Day Bio-Plastic Bags (wt. each Bag 25 gms): 40000 Pcs/Day |
Plant and Machinery cost: Rs. 156 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 41.00 |
TCI : Cost of Project: Rs789 lakhs |
|
Cost of Project : 78900000 |
Industrial gas is a group of materials that are specifically manufactured for use in industry and are also gaseous at ambient temperature and pressure...
|
Capacity : Oxygen Gas (7M3 each Cylinder): 300 Nos/Day Nitrogen Gas (7M3 each Cylinder): 100 Nos/Day |
Plant and Machinery cost: Rs. 177 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Cost of Project: Rs. 307 lakhs |
|
Cost of Project : 30700000 |