Entrepreneurs should prioritise sectors that match resource availability, employ local labour, and add value close to source:
1. Agricultural processing and packaged foods
2. Bamboo processing and value-added products
3. Ecotourism, private accommodation and adventure services
4. Like, Herbal products, ayush , ayush and nutrients
5. Freshwater aquaculture and fishery processing
6. Renewable energy (small water and solar energy)
Meghalaya offers compelling high-impact opportunities for businesses that respect environmental boundaries while delivering value – particularly in agro-processing, bamboo value chains, eco-tourism, medicinal herbs/nutrients, small hydro and solar, handloom design and cold chain logistics. Cluster-based, community-inclusive and environmentally conscious projects bring strong social , social and economic returns: higher farmer incomes, job creation and sustainable regional exports.
Please choose a project below related to this category.
Billets A semi-finished product obtained by forging, rolling or continuously casting, usually square (not exceeding 125 mm×125 mm in cross-section) wi...
|
Capacity : M.S. Billets (Size 80x80 mm to 140x140 mm): 180 MT/Day |
Plant and Machinery cost: Rs. 1565 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 63.00 |
TCI : Cost of Project: Rs. 3343 lakhs |
|
Cost of Project : 334300000 |
A thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled "Paint Thinner" are usually mineral s...
|
Capacity : Thinner (1 Ltrs Size): 4000 Bottles/Day Solvent Thinner (1 Ltrs Size): 4000 Bottles/Day |
Plant and Machinery cost: Rs 198 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 56.00 |
TCI : Cost of Project: Rs395 lakhs |
|
Cost of Project : 39500000 |
Dehydration process appears to be a variation on the air-drying process and is based on the principle of vapor pressure differentials, using air circu...
|
Capacity : Dehydrated Onion Sliced/Chopped: 300 MT/Annum Cattle Feed as by product: 210 MT/Annum |
Plant and Machinery cost: Rs. 69 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs199 lakhs |
|
Cost of Project : 19900000 |
This pre-feasibility report on Speciality/ Multi-speciality hospital consists of the feasibility detailing for three models of hospitals namely 30 bed...
|
Capacity : Super Speciality Hospital: 30 bedded |
Plant and Machinery cost: Rs. 113 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 61.00 |
TCI : Cost of Project: Rs. 978 lakhs |
|
Cost of Project : 97800000 |
A fastener is a connective mechanism that mechanically joins or affixes two ormore objects together. A bolt is an externally threaded fastener designe...
|
Capacity : Mild Steel/HT Bolts (DR M8-M16): 20 MT/Day Mild Steel/HT Nuts (DR M18-M30): 6 MT/Day |
Plant and Machinery cost: Rs. 378 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 55.00 |
TCI : Cost of Project: Rs.744 lakhs |
|
Cost of Project : 74400000 |
LPG cylinder filling plants vary considerably in size, complexity and layout. The type and size depends on such factors as maximum potential throughpu...
|
Capacity : LPG Cylinders (14.2 Kgs Size): 1000 Cylinders/Day LPG Cylinders (19 Kgs Size): 1000 Cylinders/Day |
Plant and Machinery cost: Rs.110 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 45.00 |
TCI : Cost of Project: Rs. 427 lakhs |
|
Cost of Project : 0 |
Biodegradable plastics are mainly derived from corn, wheat and potato starch. Biodegradable plastics products are thermoplastic materials which are pr...
|
Capacity : Bio-Plastic Glasses (wt. each Glass 16 gms): 62500 Pcs/Day Bio-Plastic Plates (wt. each Plate 40 gms): 25000 Pcs/Day Bio-Plastic Bags (wt. each Bag 25 gms): 40000 Pcs/Day |
Plant and Machinery cost: Rs. 156 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 41.00 |
TCI : Cost of Project: Rs789 lakhs |
|
Cost of Project : 78900000 |
Industrial gas is a group of materials that are specifically manufactured for use in industry and are also gaseous at ambient temperature and pressure...
|
Capacity : Oxygen Gas (7M3 each Cylinder): 300 Nos/Day Nitrogen Gas (7M3 each Cylinder): 100 Nos/Day |
Plant and Machinery cost: Rs. 177 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Cost of Project: Rs. 307 lakhs |
|
Cost of Project : 30700000 |
Virgin coconut oil (VCO) is the oil obtained from the fresh and mature kernel of coconut by mechanical or natural means, with or without the use of he...
|
Capacity : Virgin Coconut Oil: 500 Ltrs/Day Defatted Coconut Powder: 208 Kgs/Day |
Plant and Machinery cost: Rs.139 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 24.00 |
|
Break Even Point (BEP): 43.00 |
TCI : Cost of Project: Rs. 622 lakhs |
|
Cost of Project : 62200000 |
Palm oil is a fatty edible vegetable oil, yellowish in color, derived from the flesh and the kernel of the fruit of the oil palm tree. The oil palm tr...
|
Capacity : Palm Oil: 500 Ltrs/Day Palm Kernel: 115 Kgs/Day Palm Fibres (Cake): 500 Kgs/ Day |
Plant and Machinery cost: Rs. 32 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 68.00 |
TCI : Cost of Project: Rs75 lakhs |
|
Cost of Project : 7500000 |
Hot Melt Adhesives Production for Corrugated Board. Investment Opportunities in Manufacturing of Packaging Adhesives The hot melt adhesives are t...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Profitable Dry Fruits Processing Industry. Start a Dried Fruit & Nut Business. Processing of Cashew, Almond, Walnut, Raisins (Kishmish/Munnakka) and F...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |