Best Business Opportunities in Nepal - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Nepal's economy is still finding its footing after last year's political disruption, but manufacturing is one of the few sectors showing real acceleration.

For anyone weighing business ideas in South Asia right now, that acceleration is worth noticing. The secondary sector, which covers manufacturing and construction, is expected to grow close to 5.77% this fiscal year, a sharp jump from 3.40% previously (National Statistics Office).

This briefing breaks down where demand is rising, which government incentives actually apply to new industrial units, and what it realistically costs to set one up in Nepal today.

What Makes Now a Sound Time to Invest in Nepali Manufacturing

Cement, vegetable ghee, soybean oil, iron rods and wiring cable are driving the current rebound in Nepal's manufacturing business sector, according to National Statistics Office production data.

Standalone figure: Nepal's industrial sector, dominated by manufacturing and construction, is projected to grow 5.77% in FY 2025/26 compared to 3.40% in FY 2024/25, a near-70% acceleration year-on-year (National Statistics Office estimate).

Rising imports of raw materials, including soybean oil, zinc sheets and coal, point to expanding domestic processing capacity rather than shrinking industry, since factories need more inputs to keep up with finished-goods demand.

Five ordinances passed in March 2025 were designed specifically to ease industrial bottlenecks, giving new manufacturing business Nepal ventures a somewhat smoother regulatory path than existed even two years ago.

Demand Signals Across Nepal's Manufacturing Sub-Sectors

Construction remains the single biggest buyer of Nepali-made industrial goods, pulling cement, steel and concrete products through domestic supply chains rather than imports.

Rural and urban households alike are driving demand for basic consumer goods such as vegetable ghee, edible oils, dairy products and packaged foods, categories where local manufacturing business in Nepal, Nepal already has an established base but still leaves room for new capacity.

Nepal's hydropower expansion, backed by a technically feasible potential of roughly 45,000 MW, is also creating steady institutional demand for wiring cable, electrical fittings and industrial equipment.

Incentives, Registration Routes and Facilities for New Industries

The Industrial Enterprises Act, 2076 (2019) is the core law governing how a new manufacturing business Nepal investor registers and qualifies for incentives. It sorts industries into five tiers, cottage, micro, small, medium and large, each with its own tax treatment and compliance load.

National-Level Incentives

Micro industries operating at the time the Act commenced received a full income tax exemption, while cottage and small-scale industries with at least NPR 10 million in operation qualify for a 50% income tax exemption (Industrial Enterprises Act, 2076).

Sector-specific relief also applies: local tea processing, dairy and clothing manufacturers can claim a 50% exemption on income tax from production sales, a targeted push toward value-added processing rather than raw exports.

Provincial and Registration-Level Support

Provincial Industry and Investment Promotion Boards, established under the Act, can extend additional provincial-level incentives to industries registered and operating within that province, adding a layer of support beyond the national scheme.

Registration itself runs through the Department of Industry for larger or foreign-invested units, or the Department of Cottage and Small Industries for smaller ones, with the Foreign Investment and Technology Transfer Act, 2075 governing FDI-backed manufacturing plants.

Growth Drivers Shaping Nepal's Industrial Outlook

Manufacturing contracted 2.02% in FY 2023/24 before rebounding to an estimated 3.78% growth in 2025, driven largely by vegetable oil, cement and plywood output (national sector data).

That rebound has since accelerated further, with the secondary sector's 5.77% projected growth for FY 2025/26 reflecting stronger cement, ghee and iron rod production alongside recovering capacity utilisation.

Political stability remains the wildcard. The World Bank trimmed its FY 2025/26 growth forecast to 2.1% for the broader economy following September 2025 unrest, even as manufacturing itself continued to show resilience.

Year-Wise Manufacturing Sector Growth and Outlook (2022–2035)

The table below tracks Nepal's manufacturing and secondary sector growth trend with a forecast to 2035, built on a stated CAGR assumption tied to current reform momentum.

Year

Manufacturing / Secondary Sector Growth

Basis

2022

Recovery phase post-pandemic (actual)

Central Bureau of Statistics

2023/24

-2.02% contraction (actual)

National Statistics Office

2024/25

3.40% (actual)

National Statistics Office

2025/26

5.77% (estimate)

National Statistics Office, April 2026

2027

~5.5–6% (industry estimate)

Assumed continuation of reform momentum

2030

~6–6.5% (industry estimate)

Assumed CAGR of ~5.8% from 2026 base

2035

~7–8% cumulative sector expansion band (industry estimate)

Assumed CAGR extension, industrial policy target horizon

Projecting Nepal's Manufacturing Market Through 2035

If Nepal sustains its current reform pace, manufacturing's share of GDP could edge up from today's roughly 4.4–5% toward the higher single digits by 2035, an industry estimate built on an assumed compounding growth rate near 5.8% from the FY 2025/26 base.

That path depends on political stability holding, since the World Bank's downward revision after the September 2025 unrest shows how quickly broader economic forecasts can shift even when manufacturing itself stays resilient. Entrepreneurs entering during this recovery window may find less competition than they will once the sector's current momentum becomes widely recognised.

Import Substitution and Export Openings for New Manufacturers

Nepal imported roughly USD 17.78 billion in goods during FY 2024/25 against exports of just USD 3.74 billion, a gap that signals substantial import-substitution potential for local manufacturers (national trade data).

Standalone figure: petroleum products, machinery, gold, electrical goods and medicine make up Nepal's largest import categories, several of which, particularly electrical goods and basic machinery components, are realistic targets for new domestic manufacturing business in Nepal ventures (national trade data, FY 2024/25).

On the export side, clothing, pulses, carpets, textiles and juice remain Nepal's strongest categories, with India absorbing about 67% of exports and the United States around 12% in FY 2024/25. The expiry of the US Nepal Trade Preference Program in December 2025 does add uncertainty for export-focused apparel and handicraft manufacturers targeting the American market.

Manufacturers Already Established in Nepal

Company

Focus / Scale

Nepal Lever / Unilever Nepal

Large-scale consumer goods and FMCG manufacturing

Bottlers Nepal

Beverage bottling and manufacturing, Kathmandu and Balaju

Nepal Battery Company

Automotive and industrial battery manufacturing

Panchakanya Group

Steel, pipes and construction material manufacturing

Shivam Cement

Cement production, one of Nepal's largest cement manufacturers

Bansbari Leather and Shoe Factory

Footwear and leather goods manufacturing, Kathmandu

Nebico Pvt. Ltd.

Food and biscuit manufacturing, national distribution

Reliance Spinning Mills

Textile and yarn manufacturing, Birgunj industrial corridor

Where Growth Is Headed Next and Why It Matters for New Entrants

Value-added agro-processing, tea, dairy and edible oils, carries the clearest long-term upside given the tax exemptions already written into the Industrial Enterprises Act specifically for these categories.

Electrical goods and cable manufacturing are likely to expand fastest as hydropower capacity comes online and construction demand keeps pulling in related industrial inputs.

A consultant's note: manufacturers that register early under the small or cottage industry tiers lock in tax exemptions before any policy tightening, and pairing production with the border trade corridors near Birgunj or Biratnagar cuts logistics costs meaningfully compared with Kathmandu Valley-only operations.

Setup Costs and Investment Ranges for a New Manufacturing Unit

Figures below are industry estimates in Nepalese Rupees (NPR) for small to mid-scale manufacturing projects; actual costs vary by product category, machinery source, and province.

Cost Head

Estimated Range (NPR)

Notes

Business registration & licensing (DOI / Cottage & Small Industries)

20,000 – 150,000

Varies by industry tier and province

Land / factory shed (lease, per annum)

500,000 – 3,000,000

Higher in Kathmandu Valley than border towns

Basic machinery & equipment (small-scale)

2,000,000 – 10,000,000

Higher for imported machinery

Working capital (first 6 months)

1,000,000 – 5,000,000

Raw materials, wages, utilities

Utility connection & power backup

300,000 – 1,000,000

Grid reliability improving with hydropower expansion

Total minimum project cost (industry estimate)

2,000,000 – 20,000,000

Small to mid-scale manufacturing unit

Frequently Asked Questions on Starting a Manufacturing Business in Nepal

How do I start a manufacturing business in Nepal?

Register with the Department of Industry or the Department of Cottage and Small Industries based on scale, then apply for sector-specific licences and any applicable tax exemptions.

What is the minimum investment needed to start a manufacturing plant in Nepal?

Small-scale units typically start from NPR 2 million to NPR 20 million, though this is an industry estimate and varies by sector and location.

Which manufacturing business ideas are most profitable in Nepal right now?

Cement, vegetable oil and ghee, dairy processing, wiring cable, and agro-processing currently show the strongest demand growth.

Are there government incentives for new manufacturers in Nepal?

Yes. The Industrial Enterprises Act, 2076 offers income tax exemptions ranging from 50% to 100% depending on industry tier and sector.

Is Nepal a good country for foreign direct investment in manufacturing?

Nepal permits FDI in most manufacturing sectors under FITTA 2075, though FDI as a share of GDP remains low at under 1%.

What are the biggest challenges facing manufacturing businesses in Nepal?

Political instability, low capacity utilisation historically near 52%, and heavy reliance on imported raw materials and machinery.

Which cities in Nepal are best for setting up an industrial unit?

Kathmandu Valley remains the commercial centre, while Biratnagar, Birgunj and Bhairahawa offer lower costs and border trade access.

Does Nepal import or export more manufactured goods?

Nepal imports far more than it exports, roughly USD 17.78 billion in imports against USD 3.74 billion in exports in FY 2024/25.

What tax exemptions exist for small manufacturers in Nepal?

Cottage and small-scale industries with at least NPR 10 million in operation can claim a 50% income tax exemption under the Industrial Enterprises Act.

How is Nepal's manufacturing sector expected to grow by 2035?

Manufacturing's GDP share could rise from around 4.4-5% today toward the higher single digits by 2035 under sustained reform, an industry estimate.

What raw materials are most available locally for manufacturing in Nepal?

Agricultural inputs like oilseeds, tea, jute, sugarcane and dairy, along with limestone for cement, are the most accessible local resources.

The Bottom Line

Nepal's manufacturing sector is rebounding faster than its broader economy right now, and that gap is exactly where new entrants can find room to move.

Tax incentives under the Industrial Enterprises Act, a widening import bill that signals unmet local demand, and steady hydropower-linked industrial growth together build a credible case for entering now rather than waiting. The businesses that plan around Nepal's real constraints, political risk and import dependence for machinery, rather than around headline optimism, will be the ones still standing five years from now.

References

  • Department of Industry, Government of Nepal — industrial registration and Industrial Enterprises Act, 2076 provisions
  • National Statistics Office, Nepal — GDP growth and manufacturing sector performance, FY 2025/26
  • Central Bureau of Statistics, Nepal — GDP from manufacturing and sector-wise national accounts data
  • Ministry of Industry, Commerce and Supplies, Nepal — sectoral incentives and export trade data
  • World Bank — Nepal Development Update and FY 2025/26 growth projections
  • U.S. International Trade Administration — Nepal Country Commercial Guide, market overview and trade data

 

Please choose a project below related to this category.

Thinners and Solvent Thinners(Blending and Bottling)
Thinners and Solvent Thinners(Blending and Bottling)

A thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled "Paint Thinner" are usually mineral s...

Capacity :

Thinner (1 Ltrs Size): 4000 Bottles/Day Solvent Thinner (1 Ltrs Size): 4000 Bottles/Day

Plant and Machinery cost:

Rs 198 lakhs

Working Capital :

-

Rate of Return (ROR):

25.00

Break Even Point (BEP):

56.00

TCI :

Cost of Project: Rs395 lakhs

Cost of Project :

39500000

Dehydrated Onion
Dehydrated Onion

Dehydration process appears to be a variation on the air-drying process and is based on the principle of vapor pressure differentials, using air circu...

Capacity :

Dehydrated Onion Sliced/Chopped: 300 MT/Annum Cattle Feed as by product: 210 MT/Annum

Plant and Machinery cost:

Rs. 69 lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

57.00

TCI :

Cost of Project: Rs199 lakhs

Cost of Project :

19900000

Super Speciality Hospital
Super Speciality Hospital

This pre-feasibility report on Speciality/ Multi-speciality hospital consists of the feasibility detailing for three models of hospitals namely 30 bed...

Capacity :

Super Speciality Hospital: 30 bedded

Plant and Machinery cost:

Rs. 113 lakhs

Working Capital :

-

Rate of Return (ROR):

28.00

Break Even Point (BEP):

61.00

TCI :

Cost of Project: Rs. 978 lakhs

Cost of Project :

97800000

High Tensile Nuts & Bolts (For Automobile Industry)
High Tensile Nuts & Bolts (For Automobile Industry)

A fastener is a connective mechanism that mechanically joins or affixes two ormore objects together. A bolt is an externally threaded fastener designe...

Capacity :

Mild Steel/HT Bolts (DR M8-M16): 20 MT/Day Mild Steel/HT Nuts (DR M18-M30): 6 MT/Day

Plant and Machinery cost:

Rs. 378 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

55.00

TCI :

Cost of Project: Rs.744 lakhs

Cost of Project :

74400000

LPG Cylinder Refilling Plant
LPG Cylinder Refilling Plant

LPG cylinder filling plants vary considerably in size, complexity and layout. The type and size depends on such factors as maximum potential throughpu...

Capacity :

LPG Cylinders (14.2 Kgs Size): 1000 Cylinders/Day LPG Cylinders (19 Kgs Size): 1000 Cylinders/Day

Plant and Machinery cost:

Rs.110 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

45.00

TCI :

Cost of Project: Rs. 427 lakhs

Cost of Project :

0

Biodegradable Plastic Products (Bags, Plates & Glasses)
Biodegradable Plastic Products (Bags, Plates & Glasses)

Biodegradable plastics are mainly derived from corn, wheat and potato starch. Biodegradable plastics products are thermoplastic materials which are pr...

Capacity :

Bio-Plastic Glasses (wt. each Glass 16 gms): 62500 Pcs/Day Bio-Plastic Plates (wt. each Plate 40 gms): 25000 Pcs/Day Bio-Plastic Bags (wt. each Bag 25 gms): 40000 Pcs/Day

Plant and Machinery cost:

Rs. 156 lakhs

Working Capital :

-

Rate of Return (ROR):

28.00

Break Even Point (BEP):

41.00

TCI :

Cost of Project: Rs789 lakhs

Cost of Project :

78900000

Industrial Gases and  Speciality Gases Mixture
Industrial Gases and Speciality Gases Mixture

Industrial gas is a group of materials that are specifically manufactured for use in industry and are also gaseous at ambient temperature and pressure...

Capacity :

Oxygen Gas (7M3 each Cylinder): 300 Nos/Day Nitrogen Gas (7M3 each Cylinder): 100 Nos/Day

Plant and Machinery cost:

Rs. 177 lakhs

Working Capital :

-

Rate of Return (ROR):

25.00

Break Even Point (BEP):

62.00

TCI :

Cost of Project: Rs. 307 lakhs

Cost of Project :

30700000

Virgin Coconut Oil
Virgin Coconut Oil

Virgin coconut oil (VCO) is the oil obtained from the fresh and mature kernel of coconut by mechanical or natural means, with or without the use of he...

Capacity :

Virgin Coconut Oil: 500 Ltrs/Day Defatted Coconut Powder: 208 Kgs/Day

Plant and Machinery cost:

Rs.139 lakhs

Working Capital :

-

Rate of Return (ROR):

24.00

Break Even Point (BEP):

43.00

TCI :

Cost of Project: Rs. 622 lakhs

Cost of Project :

62200000

Palm Oil
Palm Oil

Palm oil is a fatty edible vegetable oil, yellowish in color, derived from the flesh and the kernel of the fruit of the oil palm tree. The oil palm tr...

Capacity :

Palm Oil: 500 Ltrs/Day Palm Kernel: 115 Kgs/Day Palm Fibres (Cake): 500 Kgs/ Day

Plant and Machinery cost:

Rs. 32 lakhs

Working Capital :

-

Rate of Return (ROR):

28.00

Break Even Point (BEP):

68.00

TCI :

Cost of Project: Rs75 lakhs

Cost of Project :

7500000

Hot Melt Adhesives Production for Corrugated Board
Hot Melt Adhesives Production for Corrugated Board

Hot Melt Adhesives Production for Corrugated Board. Investment Opportunities in Manufacturing of Packaging Adhesives The hot melt adhesives are t...

Capacity :

-

Plant and Machinery cost:

-

Working Capital :

-

Rate of Return (ROR):

1.00

Break Even Point (BEP):

0.00

TCI :

-

Cost of Project :

0

Profitable Dry Fruits Processing Industry
Profitable Dry Fruits Processing Industry

Profitable Dry Fruits Processing Industry. Start a Dried Fruit & Nut Business. Processing of Cashew, Almond, Walnut, Raisins (Kishmish/Munnakka) and F...

Capacity :

-

Plant and Machinery cost:

-

Working Capital :

-

Rate of Return (ROR):

1.00

Break Even Point (BEP):

0.00

TCI :

-

Cost of Project :

0

Fiber Optic Cable Production
Fiber Optic Cable Production

Fiber Optic Cable Production. Optical Fiber Cable Manufacturing Industry An optical fiber cable is a type of cable that has a number of optical f...

Capacity :

-

Plant and Machinery cost:

-

Working Capital :

-

Rate of Return (ROR):

1.00

Break Even Point (BEP):

0.00

TCI :

-

Cost of Project :

0

Make An Appointment

Talk to Our Experts Today!

appoinment
Call Us WhatsApp