Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.

 

INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

Please choose a project below related to this category.

Silica from Rice Husk Ash: A High-Potential Manufacturing Venture for Startups
Silica from Rice Husk Ash: A High-Potential Manufacturing Venture for Startups

Silica, also known as silicon dioxide, is a compound used in a variety of industries such as rubber, glass, ceramics, construction, paints, and electr...

Capacity :

Silica:1200 MT per Annum Activated Carbon (by product):132 MT Per Annum Sodium Carbonate (by product):198 MT Per Annum

Plant and Machinery cost:

500

Working Capital :

N/A

Rate of Return (ROR):

19

Break Even Point (BEP):

52

TCI :

Cost of Project :

900

Fabrication and Galvanizing Plant (GI Cable Tray, High Mast Tower, Lighting Poles, Transmission Tower, Substation and Switch Yard Structure, Crash Barriers, Solar Mounting Structure & Fasteners): A Profitable Venture for Modern Infrastructure Needs
Fabrication and Galvanizing Plant (GI Cable Tray, High Mast Tower, Lighting Poles, Transmission Tower, Substation and Switch Yard Structure, Crash Barriers, Solar Mounting Structure & Fasteners): A Profitable Venture for Modern Infrastructure Needs

With rapid infrastructure expansion across sectors like power, roads, railways, renewable energy, and urban development, the demand for fabricated and...

Capacity :

GI Cable Tray: 12 MT Per Day High Mast Tower: 14 MT Per Day Lighting Poles: MT Per Day Transmission Tower: 14 MT Per Day Substation and Switch Yard Structure: 14 MT Per Day Crash Barriers: 14 MT Per Day Solar Mounting Structure: 14 MT Per Day Fasteners: 4 MT Per Day

Plant and Machinery cost:

620

Working Capital :

N/A

Rate of Return (ROR):

32

Break Even Point (BEP):

42

TCI :

Cost of Project :

3600

Toys Manufacturing (Silicone, Wood, and Plastic): A Promising Opportunity for Startups and Entrepreneurs
Toys Manufacturing (Silicone, Wood, and Plastic): A Promising Opportunity for Startups and Entrepreneurs

The toy industry is one of the most dynamic, creative, and rewarding sectors in manufacturing. Toys are not just playthings; they are essential tools...

Capacity :

Silicone Toys: 111 Pcs Per Day Wooden Toys: 111 Pcs Per Day Plastic Toys: 111 Pcs Per Day

Plant and Machinery cost:

127

Working Capital :

N/A

Rate of Return (ROR):

26

Break Even Point (BEP):

65

TCI :

Cost of Project :

210

High Carbon Steel Production: A Promising Opportunity for Startup Success
High Carbon Steel Production: A Promising Opportunity for Startup Success

High carbon steel is a key material used across several industries due to its superior hardness, strength, and wear resistance. It contains a higher c...

Capacity :

N/A

Plant and Machinery cost:

Working Capital :

N/A

Rate of Return (ROR):

Break Even Point (BEP):

TCI :

Cost of Project :

Manufacturing of Rectangular and Hollow Steel Tubes: A Lucrative Venture for New Entrepreneurs
Manufacturing of Rectangular and Hollow Steel Tubes: A Lucrative Venture for New Entrepreneurs

Rectangular and hollow tubes form an essential part of modern infrastructure, construction, furniture, and fabrication sectors. Their growing usage in...

Capacity :

ERW M.S Circular Pipe Size: 13mm to 75mm: 200 MT Per Day ERW M.S Rectangular Pipe Size: 20mm to 20mm: 200 MT Per Day MS Scrape (by Product): 16 MT Per Day

Plant and Machinery cost:

4160

Working Capital :

N/A

Rate of Return (ROR):

29

Break Even Point (BEP):

44

TCI :

Cost of Project :

8100

TMT Bars with Scrap Melting: A Promising Manufacturing Opportunity for Entrepreneurs
TMT Bars with Scrap Melting: A Promising Manufacturing Opportunity for Entrepreneurs

Thermo Mechanically Treated (TMT) bars are the backbone of modern construction, known for their superior strength, ductility, and earthquake resistanc...

Capacity :

N/A

Plant and Machinery cost:

1860

Working Capital :

N/A

Rate of Return (ROR):

32

Break Even Point (BEP):

56

TCI :

Cost of Project :

5330

Mild Steel Channel (C Shape) Manufacturing: An Ideal Startup Path for Ambitious Entrepreneurs
Mild Steel Channel (C Shape) Manufacturing: An Ideal Startup Path for Ambitious Entrepreneurs

In the modern age of industrial infrastructure and urban development, channels – both structural and support-based – have emerged as a vit...

Capacity :

Mild Steel Channel (Size: 200x90x30 to 300x100x46): 200 MT Per Day

Plant and Machinery cost:

700

Working Capital :

N/A

Rate of Return (ROR):

31

Break Even Point (BEP):

50

TCI :

Cost of Project :

1800

Mild Steel Angles (L Shaped): A Profitable Manufacturing Opportunity for Startups and Entrepreneurs
Mild Steel Angles (L Shaped): A Profitable Manufacturing Opportunity for Startups and Entrepreneurs

Angles, commonly referred to as angle irons or L-sections, are one of the most fundamental components in structural steel fabrication. With their vers...

Capacity :

Mild Steel Angles (Size: 25x25x3 to 200x200x24):  00 MT Per Day Slags:   20 MT Per Day

Plant and Machinery cost:

750

Working Capital :

N/A

Rate of Return (ROR):

31

Break Even Point (BEP):

50

TCI :

Cost of Project :

1900

Dual Feed Distillery (Ethanol as Bio-Fuel): A High-Potential Venture for Startups
Dual Feed Distillery (Ethanol as Bio-Fuel): A High-Potential Venture for Startups

A dual feed distillery is built to process both sugarcane molasses and grain (maize, broken rice, damaged food grains) into fuel-grade ethanol. This f...

Capacity :

Ethanol from Molasses: 15 KL Per Day Ethanol from Grain (Corn): 15 KL Per Day DDGS As by Product:8 KL Per Day

Plant and Machinery cost:

3700

Working Capital :

N/A

Rate of Return (ROR):

20

Break Even Point (BEP):

41

TCI :

Cost of Project :

5700

NPK Fertilizer – A Lucrative Venture for Emerging Entrepreneurs
NPK Fertilizer – A Lucrative Venture for Emerging Entrepreneurs

NPK (Nitrogen-Phosphorus-Potassium) fertilizers are among the most essential agricultural inputs, providing balanced nutrition to crops. The variant i...

Capacity :

NPK Fertilizer (19-19-19): 10 MT Per Day

Plant and Machinery cost:

69

Working Capital :

N/A

Rate of Return (ROR):

29

Break Even Point (BEP):

44

TCI :

Cost of Project :

819

HDPE Pipes & Fittings – A High-Growth Manufacturing Venture for Startups
HDPE Pipes & Fittings – A High-Growth Manufacturing Venture for Startups

High-Density Polyethylene (HDPE) pipes and fittings have emerged as one of the most reliable, durable, and cost-effective solutions for fluid and gas...

Capacity :

HDPE Pipe (20-110mm): 8 MT Per Day HDPE Fittings (63-160mm): 2 MT Per Day

Plant and Machinery cost:

134

Working Capital :

N/A

Rate of Return (ROR):

21

Break Even Point (BEP):

60

TCI :

Cost of Project :

739

Uniform Manufacturing: Fire Resistance, ARC Flash Protection & Corporate Wear – A High-Potential Business for Startups
Uniform Manufacturing: Fire Resistance, ARC Flash Protection & Corporate Wear – A High-Potential Business for Startups

The global demand for specialized uniforms has been on a steady rise, driven by workplace safety regulations, corporate branding trends, and the expan...

Capacity :

FR Uniform: 310 Pcs Per Day ARC Flash: 310 Pcs Per Day Corporate & Hospitality: 310 Pcs Per Day

Plant and Machinery cost:

12500

Working Capital :

N/A

Rate of Return (ROR):

46

Break Even Point (BEP):

32

TCI :

Cost of Project :

15600

Make An Appointment

Talk to Our Experts Today!

appoinment
Call Us WhatsApp