Health is a primary human right and has been accorded due importance by the Constitution through Article 21.Though Article 21 stresses upon state governments to safeguard the health and nutritional well being of the people, the central government also plays an active role in the sector. Recognizing the critical role played by the Health Industry, the industry has been conferred with the infrastructure status under section 10(23G) of the Income Act.
The healthcare sector is one of the most challenging and fastest growing sectors in India. Revenues from the healthcare sector account for 5.2 per cent of the GDP, making it the third largest growth segment in India.
The Indian Health sector consists of
-Medical care providers like physicians, specialist clinics, nursing homes, hospitals.
-Diagnostic service centers and pathology laboratories.
-Medical equipment manufacturers.
-Contract research organizations (CRO's), pharmaceutical manufacturers
-Third party support service providers (catering, laundry)
The healthcare industry in the country, which comprises hospital and allied sectors, is projected to grow 23 per cent per annum. According to McKinsey & Co. a leading industrial and management consulting organization, the Indian healthcare sector, including pharmaceutical, diagnostics and hospital services, is expected to more than double its revenues to Rs 2000 billion by 2010. Expenditure on healthcare services, including diagnostics, hospital occupancy and outpatient consulting, the largest component of this spend is expected to grow more than 125% to Rs 1560 billion by 2012 from Rs 690 billion now.
The sector has registered a growth of 9.3 per cent between 2000-2009, comparable to the sectoral growth rate of other emerging economies such as China, Brazil and Mexico. According to the report, the growth in the sector would be driven by healthcare facilities, private and public sector, medical diagnostic and pathology labs and the medical insurance sector.
Healthcare facilities, inclusive of public and private hospitals, the core sector, around which the healthcare sector is centered, would continue to contribute over 70 per cent of the total sector and touch a figure of US$ 54.7 billion by 2012. Adds a FICCI-Ernst and Young report, India needs an investment of US$ 14.4 billion in the healthcare sector by 2025, to increase its bed density to at least two per thousand populations.
Technological advances achieved by medicare globally in the recent years have been phenomenal. The Indian scenario has not remained immune to these changes. While IT (information technology) has come to the aid of the breakthroughs, the progress recorded in the medicare area is as impressive as it is in the IT sector itself. The changes are in concepts, forms and content, as well as applications. These are both, quantitative and qualitative. The transformation is pervasive and has penetrated almost all specialities, from diagnostics to physiotherapy, from cardiology to oncology, from non-invasive surgery to transplants. In India, the emergence of private medicare services, especially through commercialization and corporatization, has contributed to the transformation. The rapid commercialization of the medical practices with the establishment of multi-million rupee hospitals, nursing homes and diagnostic centres, specialized and general, the demand has registered a very high growth rate in the recent years.
Medical sector in India got tax exemptions in the manufacturing of its devices from Union Budget 2010-11 along with the introduction of excellent initiatives towards the development of the sector. The FM has proposed to extend the tax exemption on medical apparatus and devices and concessional tariff available to certified government hospitals. Moreover, the producers of orthopaedic implants have been relieved from import tax.
The incentives proposed by the FM are expected to trigger the expansion of already fast developing medical apparatus and machinery sector in India. By 2010 the medical apparatus and machinery industry is estimated to reach USD 1.8 billion and is projected to expand at a rate of 23% on annual basis as per the NIPER report.
This time the focus of the budget was on rural healthcare, with the fund allocations rising to a whopping 22,300 crores (Rs 223 billion/$4.82 billion) from 19,534 crores during the previous fiscal year. This escalation is in keeping with the evolving needs of the growing healthcare industry of the country. Relaxation of FDI norms may see more international players coming in to India in the healthcare sector. Added to it, rationalization of duties on medical equipment can make imports cheaper and can significantly lower healthcare costs in the country in the coming years.
The government, along with participation from the private sector, is planning to invest US$ 1 billion to US$ 2 billion in an effort to make India one of the top five global pharmaceutical innovation hubs by 2020. The sector has been attracting huge investments from domestic players as well as financial investors and private equity (PE) firms. The Indian market is expanding in all directions as a result of better affordability, greater health consciousness and expanding medical service institutions.
Please choose a project below related to this category.
A dental impression is a negative imprint of hard (teeth) and soft tissues in the mouth from which a positive reproduction (cast or model) can be form...
|
Capacity : Composite Resin Poly Carboxylate Cement (500 gms Pack): 80 Packs/ Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid): 1333 Packs/ Day Composite Resin Poly Carboxylate Cement (500 gms Pack):40 Packs/ Day |
Plant and Machinery cost: 26 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 33.00 |
|
Break Even Point (BEP): 75.00 |
TCI : Cost of Project: Rs 71 lakhs |
|
Cost of Project : 7100000 |
Surgical cotton is also known as absorbent cotton” or “cotton wool”. Surgical/Absorbent cotton is cleared de-oiled and bleached cotton packed in diffe...
|
Capacity : Surgical Cotton :300,000kgs/annum |
Plant and Machinery cost: Rs 69 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs 238 lakhs |
|
Cost of Project : 23800000 |
Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids...
|
Capacity : I.V. Fluid (500 ml.):14,400,000 Bottles/annum |
Plant and Machinery cost: Rs 476 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 53.00 |
TCI : Cost of Project: Rs 1092 lakhs |
|
Cost of Project : 109200000 |
A diaper (American English) or a nappy (British English) is a type of underwear that allows the wearer to defecate or urinate without the use of a toi...
|
Capacity : Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000 Pkts/annum |
Plant and Machinery cost: 1029 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 29.00 |
|
Break Even Point (BEP): 51.00 |
TCI : Cost of Project : 1657 lakhs |
|
Cost of Project : 165700000 |
The Baby-cereal-foods is that enriched food which has a requisite level of nutrition. This requisite level is prescribed by various dietitians & p...
|
Capacity : Baby Cereal Food (Packing in 225 gms Size Packet): 600,000 Kgs/annum |
Plant and Machinery cost: Rs 35 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 32.00 |
|
Break Even Point (BEP): 72.00 |
TCI : Cost of Project : Rs 82 lakhs |
|
Cost of Project : 8200000 |
Vitamin C is a physiological antioxidant of major importance for protection against diseases and degenerative processes caused by oxidative stress. Vi...
|
Capacity : 2400 MT/annum |
Plant and Machinery cost: Rs 123 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 29.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Cost of Project : Rs 563 lakhs |
|
Cost of Project : 56300000 |
A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plastic...
|
Capacity : 15,000 Nos/Day |
Plant and Machinery cost: Rs 178 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 51.00 |
TCI : Cost of Project :Rs 316 Lakhs |
|
Cost of Project : 31600000 |
Petroleum jelly or petrolatum was discovered as a paraffin-like material coating oil rigs. Since then, it has been used in various ointments and as a...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
The health food drink market in India is approx. 300,000 MT per annum and is growing at the rate of around 15% per annum. The health food drinks are p...
|
Capacity : 30 MT/Day |
Plant and Machinery cost: Rs 284 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.54 |
|
Break Even Point (BEP): 55.85 |
TCI : Cost of Project:Rs 1024 Lakhs |
|
Cost of Project : 102400000 |
Man has always been keen to keep himself free from all miseries. It has been a constant endeavor to discover better ways to prevent and cure human dis...
|
Capacity : Chyawanprash: 500.0 Kgs/Day•Cough Syrup (Herbal): 200.0 Kgs/Day•Ayurvedic Hair Oil: 200.0 Kgs/Day•Jawahar Mohra Tablets :1.0 Kgs/Day•Mukta Shukti Tablets: 1.0 Kgs/Day |
Plant and Machinery cost: Rs 69 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 24.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project : Rs 474 Lakhs |
|
Cost of Project : 47400000 |
Fitness/Exercise equipment is any apparatus or device used during physical activity to enhance the strength or conditioning effects of that exercise b...
|
Capacity : Elliptical Trainers: 21000 Nos. / Annum•Treadmill: 21000 Nos. / Annum•Exercise Bikes: 21000 Nos. / Annum |
Plant and Machinery cost: Rs. 65 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 65.00 |
TCI : Cost of Project : Rs. 298 Lakhs |
|
Cost of Project : 29800000 |
Karela is a vegetable which is grown in every part of India. Karela is especially grown in India in from April to August. In the session it is abundan...
|
Capacity : 500 Kgs. / Day |
Plant and Machinery cost: Rs. 97 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 24.00 |
|
Break Even Point (BEP): 56.00 |
TCI : Cost of Project : Rs. 236 Lakhs |
|
Cost of Project : 23600000 |