Best Business Opportunities in Kenya, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Situated along the coast in East Africa, Kenya achieves an impressive balance as both a regional economic leader and a well-integrated axis towards the East African Community so far. Host to one of the most diversified economies grounded in agriculture, services, manufacturing, logistics, and the recently acclaimed technology, Kenya is the primary fintech and mobile-innovation frontier not just on the African continent yet. Following government-induced policies like Vision 2030, the state remains highly industrializing, infrastructural, and export-oriented until today. Therefore, spiced up by the East African Community, COMESA, and AfCFTA market approaches alongside fast-growing digitalization, Kenya yields an all absorbing investment and entrepreneurial bundle.

Reasons to Start Industry in Kenya

The reasoning behind believing that very few but maybe all the firms operating in Kenya’s economy are large and competitive from a global viewpoint is shared by the authors. And here are the reasons given: 

1. Strategic Location and Regional Market Access – Mombasa port and Nairobi, Kisumu air hubs are linking Uganda, Rwanda, South Sudan, parts of DR Congo, and other landlocked neighbors to global markets. EAC, COMESA membership, and AfCFTA preferential access are facilitating regional exports. 

2. Young, Mobile, and Skilled Workforce – a young, steadily demographically expanding population with greater than world-leading mobile penetration and fast-improving tertiary-education outputs in engineering, business, ICT, etc. suited for tech, manufacturing, and service industries thus is in abundance. 

3. Strong Digital & Innovation Ecosystem – Nairobi is a worldwide hotspot for mobile money e.g., M-Pesa, and renowned Fintech and AgriTech innovations Silicon Savannah. Incubators, accelerators, sector-specific innovation Hubs, and unceasing VC flows are rendering scaling tech startups feasible. 

4. Improving Infrastructure – there has been vast investment in roads, rail (SGR, for example), ports, and airport upgrades, as well as geothermal plants and increasing renewable energy generation, so causing considerably lesser logistical and power-supply-related issues for industry than commonly imagined. 

5. Policy Support & Investment Facilitation – the KIA — Kenya Investment Authority and numerous county-level investment promotion agencies are creating investment incentives, single-window facilitation, and industry-targeted investment assistance to strategic sectors.

Why Select Industry for Startup in Kenya

Entrepreneurs can focus on sectors that match Kenya’s comparative advantages and national priorities:

1. Agro-processing and Cold Chain Logistics- This focus area involves tea, coffee, fruits, and vegetables, as well as dairy and meat products, juice, canned and edible oils, and frozen seafood with a view to meeting both domestic consumption needs and expanding to the EU and the Middle East.

2. Horticulture & Floriculture Processing- As for tea, covering, coffee, and pulses, already established world-class flower exports benefitting from horticultural post-harvest technology, grading, packaging and air freight enabled value chains establishes Kenya as an excellent choice globally.

3. Renewables & Distributed Energy- These target solar mini-grids, off-grid solar products, energy storage, and hybrid solutions that precisely respond to industry demands and rural electrification needs and include promising commercial opportunities.

4. Manufacturing & Light Industries for the future- Especially when focusing on food & beverage, textile (value added apparel), pharmaceuticals (formulations, packaging), building materials (cement, prefabs), and automotive components, it is facilitated by logistics competitive growth.

5. ICT, Fintech & E-services- That leverages Fintech, mobile payments, InsurTech, AgriTech, e-health and SaaS platforms, and targets both SMEs and larger-scale enterprises underpinned by high digital uptake in Kenya.

Government Support and Incentives

KenInvest, the Kenyan government and county administrations provide:

  • Incentives & exemptions  for export driven units & investments in priority sectors   – subject to industry & location. 
  • Duty-free import  of capital equipment in pharma, agro-processing & other notified  sectors. 
  • Single point clearance for CTEs & SEZs by the Department of Industrial Policy and Promotion  
  • In every state, an entrepreneur has to get clearance / approval  from several departments 
  • Incentives  – Investment allowance to new PFY projects, bettered depreciation rates in spinning, benefits in IT parks.

Kenya has all that it takes to be one of Africa’s top destinations for entrepreneurs and investors including but not limited to strategic geography, digital leadership, rich agricultural endowments, improving infrastructures and supportive policy frameworks. The priority opportunities are agro-processing, cold chain logistics, renewable energy, manufacturing, fintech, and tourism, which can all scale to regional markets within the AfCFTA and EAC frameworks.



 

Best Business Opportunities in Kenya, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Please choose a project below related to this category.

PHOSPHINE GAS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
PHOSPHINE GAS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Product Profile Phosphine gas is defined as Phosphine that is in the gas phase, or phosphine that is above its boiling point of 85 degrees C. Phosphi...

Capacity :

-

Plant and Machinery cost:

-

Working Capital :

-

Rate of Return (ROR):

0.01

Break Even Point (BEP):

0.00

TCI :

-

Cost of Project :

0

Hydrogen Gas from Methanol Cracking - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Hydrogen Gas from Methanol Cracking - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Hydrogen gas was first artificially produced in the early 16th century, via the mixing of metals with strong acids. In 1766-81, Henry Cavendish was th...

Capacity :

120000 Nos. Cylinder/Annum 6m3, 80000 Nos. Cylinder/Annum 9m3

Plant and Machinery cost:

707 Lakhs

Working Capital :

-

Rate of Return (ROR):

45.00

Break Even Point (BEP):

44.00

TCI :

Cost of Project : 1202 Lakhs

Cost of Project :

120200000

Zinc Sulphate (33%, 21% & 12%) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Zinc Sulphate (33%, 21% & 12%) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Zinc sulphate is a powder that is colourless and completely water soluble. The product can be used in different applications, including some connected...

Capacity :

-

Plant and Machinery cost:

142 Lakhs

Working Capital :

-

Rate of Return (ROR):

39.00

Break Even Point (BEP):

50.00

TCI :

Cost of Project : 414 Lakhs

Cost of Project :

0

TYRES AND TUBES FOR BICYCLE AND RICKSHAW - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
TYRES AND TUBES FOR BICYCLE AND RICKSHAW - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Tyres and Tubes are the backbone of the bicycle and rickshaw. Bicycle and rickshaw continues to be the principal mode of transport for the low and mid...

Capacity :

300000 Nos. Tyres & 300000 Nos. Tubes

Plant and Machinery cost:

158 Lakhs

Working Capital :

-

Rate of Return (ROR):

42.00

Break Even Point (BEP):

53.00

TCI :

Cost of Project : 351 Lakhs

Cost of Project :

0

WOODEN TOOTHPICK - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout
WOODEN TOOTHPICK - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A toothpick is a small stick of wood, plastic, bamboo, metal, bone or other substance used to remove detritus from the teeth, usually after a meal. A...

Capacity :

-

Plant and Machinery cost:

6 Lakhs

Working Capital :

-

Rate of Return (ROR):

42.00

Break Even Point (BEP):

62.00

TCI :

22 Lakhs

Cost of Project :

0

FLY ASH BRICKS FROM LIMESTONE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
FLY ASH BRICKS FROM LIMESTONE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fly Ash bricks are alternative to burnt clay bricks in the construction sector in India. Fly ash bricks are an environment friendly cost saving buildi...

Capacity :

12000000 Nos./Annum

Plant and Machinery cost:

80 Lakhs

Working Capital :

-

Rate of Return (ROR):

43.00

Break Even Point (BEP):

40.00

TCI :

409 Lakhs

Cost of Project :

0

BIO PLASTIC PRODUCTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
BIO PLASTIC PRODUCTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Plastics have become an important part of modern life and are used in different sectors of applications like packaging, building materials, consumer p...

Capacity :

-

Plant and Machinery cost:

166 Lakhs

Working Capital :

-

Rate of Return (ROR):

47.00

Break Even Point (BEP):

51.00

TCI :

Cost of Project : 298 Lakhs

Cost of Project :

0

PACKAGED DRINKING WATER - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
PACKAGED DRINKING WATER - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bottled Water means water intended for human consumption and which is sealed in bottles and other containers with no added ingredients except that it...

Capacity :

-

Plant and Machinery cost:

25 Lakhs

Working Capital :

-

Rate of Return (ROR):

44.00

Break Even Point (BEP):

54.00

TCI :

100 Lakhs

Cost of Project :

0

FURFURAL FROM BAGASSE & CORNCOBS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout
FURFURAL FROM BAGASSE & CORNCOBS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Furfural is produced from agricultural waste biomass that contain pentosans, which are aldose to sugars, composed of small rings formed from short fiv...

Capacity :

1200 MT/Annum

Plant and Machinery cost:

119 Lakhs

Working Capital :

-

Rate of Return (ROR):

41.00

Break Even Point (BEP):

55.00

TCI :

Cost of Project : 411 Lakhs

Cost of Project :

0

PACKAGED DRINKING WATER - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
PACKAGED DRINKING WATER - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bottled Water means water intended for human consumption and which is sealed in bottles and other containers with no added ingredients except that it...

Capacity :

3000000 Bottles/Annum

Plant and Machinery cost:

39 Lakhs

Working Capital :

-

Rate of Return (ROR):

41.00

Break Even Point (BEP):

52.00

TCI :

Cost of Project : 108 Lakhs

Cost of Project :

0

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A plastic syringe is a cylindrical tool used for many purposes, from medicine to mechanics, to arts, crafts and refilling inkjet printer cartridges. D...

Capacity :

22500000 Nos. 5 Ml Size/Annum, 22500000 Nos. 10 Ml Size/Annum

Plant and Machinery cost:

636 Lakhs

Working Capital :

-

Rate of Return (ROR):

46.00

Break Even Point (BEP):

42.00

TCI :

Cost of Project : 837 Lakhs

Cost of Project :

0

PACKAGED DRINKING WATER WITH PET BOTTLES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
PACKAGED DRINKING WATER WITH PET BOTTLES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Bottled Water means water intended for human consumption and which is sealed in bottles and other containers with no added ingredients except that it...

Capacity :

60000000 Nos. Bottles/Annum

Plant and Machinery cost:

217 Lakhs

Working Capital :

-

Rate of Return (ROR):

45.00

Break Even Point (BEP):

60.00

TCI :

Cost of Project : 454 Lakhs

Cost of Project :

0

Make An Appointment

Talk to Our Experts Today!

appoinment