Best Business Opportunities in Kenya, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Situated along the coast in East Africa, Kenya achieves an impressive balance as both a regional economic leader and a well-integrated axis towards the East African Community so far. Host to one of the most diversified economies grounded in agriculture, services, manufacturing, logistics, and the recently acclaimed technology, Kenya is the primary fintech and mobile-innovation frontier not just on the African continent yet. Following government-induced policies like Vision 2030, the state remains highly industrializing, infrastructural, and export-oriented until today. Therefore, spiced up by the East African Community, COMESA, and AfCFTA market approaches alongside fast-growing digitalization, Kenya yields an all absorbing investment and entrepreneurial bundle.

Reasons to Start Industry in Kenya

The reasoning behind believing that very few but maybe all the firms operating in Kenya’s economy are large and competitive from a global viewpoint is shared by the authors. And here are the reasons given: 

1. Strategic Location and Regional Market Access – Mombasa port and Nairobi, Kisumu air hubs are linking Uganda, Rwanda, South Sudan, parts of DR Congo, and other landlocked neighbors to global markets. EAC, COMESA membership, and AfCFTA preferential access are facilitating regional exports. 

2. Young, Mobile, and Skilled Workforce – a young, steadily demographically expanding population with greater than world-leading mobile penetration and fast-improving tertiary-education outputs in engineering, business, ICT, etc. suited for tech, manufacturing, and service industries thus is in abundance. 

3. Strong Digital & Innovation Ecosystem – Nairobi is a worldwide hotspot for mobile money e.g., M-Pesa, and renowned Fintech and AgriTech innovations Silicon Savannah. Incubators, accelerators, sector-specific innovation Hubs, and unceasing VC flows are rendering scaling tech startups feasible. 

4. Improving Infrastructure – there has been vast investment in roads, rail (SGR, for example), ports, and airport upgrades, as well as geothermal plants and increasing renewable energy generation, so causing considerably lesser logistical and power-supply-related issues for industry than commonly imagined. 

5. Policy Support & Investment Facilitation – the KIA — Kenya Investment Authority and numerous county-level investment promotion agencies are creating investment incentives, single-window facilitation, and industry-targeted investment assistance to strategic sectors.

Why Select Industry for Startup in Kenya

Entrepreneurs can focus on sectors that match Kenya’s comparative advantages and national priorities:

1. Agro-processing and Cold Chain Logistics- This focus area involves tea, coffee, fruits, and vegetables, as well as dairy and meat products, juice, canned and edible oils, and frozen seafood with a view to meeting both domestic consumption needs and expanding to the EU and the Middle East.

2. Horticulture & Floriculture Processing- As for tea, covering, coffee, and pulses, already established world-class flower exports benefitting from horticultural post-harvest technology, grading, packaging and air freight enabled value chains establishes Kenya as an excellent choice globally.

3. Renewables & Distributed Energy- These target solar mini-grids, off-grid solar products, energy storage, and hybrid solutions that precisely respond to industry demands and rural electrification needs and include promising commercial opportunities.

4. Manufacturing & Light Industries for the future- Especially when focusing on food & beverage, textile (value added apparel), pharmaceuticals (formulations, packaging), building materials (cement, prefabs), and automotive components, it is facilitated by logistics competitive growth.

5. ICT, Fintech & E-services- That leverages Fintech, mobile payments, InsurTech, AgriTech, e-health and SaaS platforms, and targets both SMEs and larger-scale enterprises underpinned by high digital uptake in Kenya.

Government Support and Incentives

KenInvest, the Kenyan government and county administrations provide:

  • Incentives & exemptions  for export driven units & investments in priority sectors   – subject to industry & location. 
  • Duty-free import  of capital equipment in pharma, agro-processing & other notified  sectors. 
  • Single point clearance for CTEs & SEZs by the Department of Industrial Policy and Promotion  
  • In every state, an entrepreneur has to get clearance / approval  from several departments 
  • Incentives  – Investment allowance to new PFY projects, bettered depreciation rates in spinning, benefits in IT parks.

Kenya has all that it takes to be one of Africa’s top destinations for entrepreneurs and investors including but not limited to strategic geography, digital leadership, rich agricultural endowments, improving infrastructures and supportive policy frameworks. The priority opportunities are agro-processing, cold chain logistics, renewable energy, manufacturing, fintech, and tourism, which can all scale to regional markets within the AfCFTA and EAC frameworks.



 

Best Business Opportunities in Kenya, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Please choose a project below related to this category.

Bicycle and Cycle Rickshaw Manufacturing
Bicycle and Cycle Rickshaw Manufacturing

A Bicycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. Bicycles are one of th...

Capacity :

Bicycles (Different Sizes): 1000 Nos. /Day Cycle Rickshaw: 1000 Nos. Day

Plant and Machinery cost:

Rs 336 lakhs

Working Capital :

0

Rate of Return (ROR):

27.00

Break Even Point (BEP):

63.00

TCI :

Cost of Project: Rs 1525 lakhs

Cost of Project :

152500000

Disposable Plastic Syringes
Disposable Plastic Syringes

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized...

Capacity :

Disposable Plastic Syringes 2 ml Size: 350 Boxes/day Disposable Plastic Syringes 5 ml Size: 350 Boxes/day Disposable Plastic Syringes 10 ml Size: 200 Boxes/day Disposable Plastic Syringes 50 ml Size: 100 Boxes/day

Plant and Machinery cost:

Rs 151 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

63.00

TCI :

Cost of Project: Rs 343 lakhs

Cost of Project :

34300000

Gypsum Plaster Board
Gypsum Plaster Board

Gypsum board, also known as “drywall” or “plaster board,” consists of a core of gypsum surrounded with a paper covering. These gypsum board products i...

Capacity :

Gypsum Plaster Board (Size 2440x1220x12 mm):10000 Sq.Mt./day

Plant and Machinery cost:

549 lakhs

Working Capital :

-

Rate of Return (ROR):

21.00

Break Even Point (BEP):

57.00

TCI :

Cost of Project: Rs 3188 lakhs

Cost of Project :

318800000

Bicycle Manufacturing
Bicycle Manufacturing

Bicycles are one of the oldest forms of transportation. Even today millions of people travel by bicycle daily to their work, college, universities and...

Capacity :

Bicycles (Different Sizes): 2000 Nos./day

Plant and Machinery cost:

336 lakhs

Working Capital :

-

Rate of Return (ROR):

29.00

Break Even Point (BEP):

56.00

TCI :

Cost of Project: Rs 1589 lakhs

Cost of Project :

158900000

E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplus, obsolete, broken or disc...

Capacity :

Copper Wire:1.67 MT/day Plastic Granules:7.43 MT/day Glass :3.23 MT/day Ferrous Metal

Plant and Machinery cost:

131 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

30.00

TCI :

Cost of Project: Rs 1272 lakhs

Cost of Project :

127200000

Furfural from Bagasse and Corncobs
Furfural from Bagasse and Corncobs

Furfural is produced from agricultural waste biomass that contain pentosans, which are aldose to sugars, composed of small rings formed from short fiv...

Capacity :

4000 Kgs. /Day

Plant and Machinery cost:

168 lakhs

Working Capital :

-

Rate of Return (ROR):

17.00

Break Even Point (BEP):

68.00

TCI :

Cost of Project :444 lakhs

Cost of Project :

44400000

E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplus, obsolete, broken or disc...

Capacity :

7500 MT/annum

Plant and Machinery cost:

131 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

30.00

TCI :

Cost of Project: 272 lakhs

Cost of Project :

127200000

Production of Micronutrients Fertilizer Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Production of Micronutrients Fertilizer Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nitrog...

Capacity :

Micronutrient Fertilizer for Fruits : 187,500 Kgs/annum Micronutrient Fertilizer for Vegeta....

Plant and Machinery cost:

23 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

76.00

TCI :

Cost of Project 114 Lakhs

Cost of Project :

11400000

Production of different grades of Lime from Limestone (Technical Grade Lime, Refractory Grade Lime, Agriculture Grade Lime, FCC Grade Lime) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey
Production of different grades of Lime from Limestone (Technical Grade Lime, Refractory Grade Lime, Agriculture Grade Lime, FCC Grade Lime) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

Lime is manufactured from lime stone. Lime is mainly used for manufacture of hydrated lime. Hydrated lime is a dry powder obtained by treating quick l...

Capacity :

600 MT/Day

Plant and Machinery cost:

131 Lakhs

Working Capital :

-

Rate of Return (ROR):

24.00

Break Even Point (BEP):

42.00

TCI :

Cost of Project 548 Lakhs

Cost of Project :

54800000

Production of Toilet Paper Rolls, Facial Tissue & Paper Napkins  Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study
Production of Toilet Paper Rolls, Facial Tissue & Paper Napkins Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

The tissues paper sector has boomed over the last few years. With a move to more luxurious tissue paper and ultra-absorbent paper towels the industry...

Capacity :

Toilet Paper Rolls : 7,200,000 Nos./annum Paper Napkin (100 Pcs.): 558,000 Nos./annum Facial Tissue

Plant and Machinery cost:

59 Lakhs

Working Capital :

-

Rate of Return (ROR):

29.00

Break Even Point (BEP):

41.00

TCI :

Cost of Project 341 Lakhs

Cost of Project :

34100000

Detergent Cake & Powder
Detergent Cake & Powder

Detergents are defined as complete washing or cleaning products, which contain among their ingredients an organic surface-active compound (Surfactant)...

Capacity :

Detergent Cake:180,000Kgs/annum Detergent Powder:180,000Kgs/annum

Plant and Machinery cost:

Rs 15 lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

76.00

TCI :

Cost of Project : Rs 36 lakhs

Cost of Project :

3600000

Micronutrients Fertilizer
Micronutrients Fertilizer

Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nitrog...

Capacity :

Micronutrient Fertilizer for Fruits: 187,500 Kgs/annum Micronutrient Fertilizer for Vegetables: 112,500 Kgs/annum

Plant and Machinery cost:

Rs 23 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

76.00

TCI :

Cost of Project: Rs 114 lakhs

Cost of Project :

11400000

Make An Appointment

Talk to Our Experts Today!

appoinment