Best Business Opportunities in Kenya, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Situated along the coast in East Africa, Kenya achieves an impressive balance as both a regional economic leader and a well-integrated axis towards the East African Community so far. Host to one of the most diversified economies grounded in agriculture, services, manufacturing, logistics, and the recently acclaimed technology, Kenya is the primary fintech and mobile-innovation frontier not just on the African continent yet. Following government-induced policies like Vision 2030, the state remains highly industrializing, infrastructural, and export-oriented until today. Therefore, spiced up by the East African Community, COMESA, and AfCFTA market approaches alongside fast-growing digitalization, Kenya yields an all absorbing investment and entrepreneurial bundle.

Reasons to Start Industry in Kenya

The reasoning behind believing that very few but maybe all the firms operating in Kenya’s economy are large and competitive from a global viewpoint is shared by the authors. And here are the reasons given: 

1. Strategic Location and Regional Market Access – Mombasa port and Nairobi, Kisumu air hubs are linking Uganda, Rwanda, South Sudan, parts of DR Congo, and other landlocked neighbors to global markets. EAC, COMESA membership, and AfCFTA preferential access are facilitating regional exports. 

2. Young, Mobile, and Skilled Workforce – a young, steadily demographically expanding population with greater than world-leading mobile penetration and fast-improving tertiary-education outputs in engineering, business, ICT, etc. suited for tech, manufacturing, and service industries thus is in abundance. 

3. Strong Digital & Innovation Ecosystem – Nairobi is a worldwide hotspot for mobile money e.g., M-Pesa, and renowned Fintech and AgriTech innovations Silicon Savannah. Incubators, accelerators, sector-specific innovation Hubs, and unceasing VC flows are rendering scaling tech startups feasible. 

4. Improving Infrastructure – there has been vast investment in roads, rail (SGR, for example), ports, and airport upgrades, as well as geothermal plants and increasing renewable energy generation, so causing considerably lesser logistical and power-supply-related issues for industry than commonly imagined. 

5. Policy Support & Investment Facilitation – the KIA — Kenya Investment Authority and numerous county-level investment promotion agencies are creating investment incentives, single-window facilitation, and industry-targeted investment assistance to strategic sectors.

Why Select Industry for Startup in Kenya

Entrepreneurs can focus on sectors that match Kenya’s comparative advantages and national priorities:

1. Agro-processing and Cold Chain Logistics- This focus area involves tea, coffee, fruits, and vegetables, as well as dairy and meat products, juice, canned and edible oils, and frozen seafood with a view to meeting both domestic consumption needs and expanding to the EU and the Middle East.

2. Horticulture & Floriculture Processing- As for tea, covering, coffee, and pulses, already established world-class flower exports benefitting from horticultural post-harvest technology, grading, packaging and air freight enabled value chains establishes Kenya as an excellent choice globally.

3. Renewables & Distributed Energy- These target solar mini-grids, off-grid solar products, energy storage, and hybrid solutions that precisely respond to industry demands and rural electrification needs and include promising commercial opportunities.

4. Manufacturing & Light Industries for the future- Especially when focusing on food & beverage, textile (value added apparel), pharmaceuticals (formulations, packaging), building materials (cement, prefabs), and automotive components, it is facilitated by logistics competitive growth.

5. ICT, Fintech & E-services- That leverages Fintech, mobile payments, InsurTech, AgriTech, e-health and SaaS platforms, and targets both SMEs and larger-scale enterprises underpinned by high digital uptake in Kenya.

Government Support and Incentives

KenInvest, the Kenyan government and county administrations provide:

  • Incentives & exemptions  for export driven units & investments in priority sectors   – subject to industry & location. 
  • Duty-free import  of capital equipment in pharma, agro-processing & other notified  sectors. 
  • Single point clearance for CTEs & SEZs by the Department of Industrial Policy and Promotion  
  • In every state, an entrepreneur has to get clearance / approval  from several departments 
  • Incentives  – Investment allowance to new PFY projects, bettered depreciation rates in spinning, benefits in IT parks.

Kenya has all that it takes to be one of Africa’s top destinations for entrepreneurs and investors including but not limited to strategic geography, digital leadership, rich agricultural endowments, improving infrastructures and supportive policy frameworks. The priority opportunities are agro-processing, cold chain logistics, renewable energy, manufacturing, fintech, and tourism, which can all scale to regional markets within the AfCFTA and EAC frameworks.



 

Best Business Opportunities in Kenya, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Please choose a project below related to this category.

Paper Napkins, Toilet Paper Rolls & Facial Tissues
Paper Napkins, Toilet Paper Rolls & Facial Tissues

The tissues paper sector has boomed over the last few years. With a move to more luxurious tissue paper and ultra-absorbent paper towels the industry...

Capacity :

Toilet Paper Rolls: 7,200,000 Nos./annum Paper Napkin (100 Pcs.): 558,000 Nos./annum Facial Tissue (100 Pcs.): 1,251,000 Nos./annum

Plant and Machinery cost:

Rs 59 lakhs

Working Capital :

-

Rate of Return (ROR):

29.00

Break Even Point (BEP):

41.00

TCI :

Cost of Project : Rs 341 lakhs

Cost of Project :

34100000

E-Waste Recycling Plant
E-Waste Recycling Plant

Electronic wastes, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE) is a description of surplus, obsolete, broken or discarded el...

Capacity :

Copper Wire: 500mt/annum Plastic Granules: 2230mt/annum Glass: 970mt/annum Ferrous Metal: 800mt/annum Monitors (Repair): 3000mt/annum

Plant and Machinery cost:

Rs 132 lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

54.00

TCI :

Cost of Project: Rs 518 lakhs

Cost of Project :

51800000

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized...

Capacity :

Disposable Plastic Syringes 2 ml Size : 300,000 Boxes/Annum Disposable Plastic Syringes 5 ml Size : 300,000 Boxes/Annum Disposable Plastic Syringes 10 ml Siz : 300,000 Boxes/Annum

Plant and Machinery cost:

Rs 802 lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

44.00

TCI :

Cost of Project: Rs 1474 lakhs

Cost of Project :

147400000

Red Oxide Zinc Chromate Primer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Red Oxide Zinc Chromate Primer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durabilit...

Capacity :

360,000Ltrs/Annum

Plant and Machinery cost:

Rs. 13 lakhs

Working Capital :

-

Rate of Return (ROR):

30.00

Break Even Point (BEP):

0.00

TCI :

Cost of Project : Rs. 42 lakhs

Cost of Project :

4200000

Bicycle Tyres & Tubes from Natural Rubber - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Bicycle Tyres & Tubes from Natural Rubber - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Cycling is amongst the most sustainable modes of mobility, which has zero dependence on fossil fuels and zero emissions unlike the motorized modes of...

Capacity :

Bicycle Tyres : 450000 Pcs/annum Bicycle Tubes : 450000 Pcs/annum

Plant and Machinery cost:

405 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

52.00

TCI :

Cost of Project: 646 lakhs

Cost of Project :

64600000

Micronutrients Fertilizer for Banana, Vegetables and Citrus - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study
Micronutrients Fertilizer for Banana, Vegetables and Citrus - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Micronutrients are elements which are essential for plant growth, but are required in much smaller amounts than those of the primary nutrients; nitrog...

Capacity :

Micronutrients Fertilizer for Banana:500 Kgs/Day •Micronutrients Fertilizer for Vegetables:500 Kgs/Day •Micronutrients Fertilizer for Citrus: 500 Kgs/Day

Plant and Machinery cost:

Rs 7 Lakhs

Working Capital :

-

Rate of Return (ROR):

30.00

Break Even Point (BEP):

72.00

TCI :

Cost of Project:Rs 30 Lakhs

Cost of Project :

3000000

Wooden Pencils - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic
Wooden Pencils - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

A pencil is lead material enclosed in wood or put in metal holder used for drawing or writing. Pencil is a valuable item used by all levels of schools...

Capacity :

Wooden Pencils 200 Gross/Day

Plant and Machinery cost:

Rs 31 Lakhs

Working Capital :

-

Rate of Return (ROR):

24.60

Break Even Point (BEP):

71.87

TCI :

Cost of Project : Rs 55 Lakhs

Cost of Project :

5500000

Plastic Waste Recycling Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Plastic Waste Recycling Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Waste is now a global problem, and one that must be addressed in order to solve the world's resource and energy challenges. Plastics are made from lim...

Capacity :

Plastic Granules 4500 Kgs/Day

Plant and Machinery cost:

Rs 43 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

64.52

TCI :

Cost of Project : Rs 219 Lakhs

Cost of Project :

21900000

Biomedical Waste Recycling - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Biomedical Waste Recycling - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Biomedical waste is waste that is either putrescible or potentially infectious. Biomedical waste may also include waste associated with the generation...

Capacity :

Plastic Granules 3 MT/Day •Recycled Paper 3 MT/Day •Recycled Glass 1 MT/Day •Recycled Metal 0.50 MT/Day •Recycled Rubber 1 MT/Day

Plant and Machinery cost:

Rs 214 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.65

Break Even Point (BEP):

52.47

TCI :

Cost of Project : Rs 1182 Lakhs

Cost of Project :

118200000

Detergent Cake - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic
Detergent Cake - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Detergents are defined as complete washing or cleaning products, which contain among their ingredients an organic surface-active compound (Surfactant)...

Capacity :

4MT/Day

Plant and Machinery cost:

Rs 18 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

43.00

TCI :

Cost of Project:Rs 228 Lakhs

Cost of Project :

22800000

Bicycle Manufacturing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Bicycle Manufacturing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A bicycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A bicycle rider is cal...

Capacity :

Bicycles (Different Sizes):2000 Nos./Day

Plant and Machinery cost:

Rs 270 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.39

Break Even Point (BEP):

31.24

TCI :

Cost of Project:Rs 3972 Lakhs

Cost of Project :

397200000

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue
Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable Syringes made of plastic material have been successfully used in medical and pharmaceutical practice for many years. The constantly increas...

Capacity :

•Disposable Plastic Syringes (2 ml Size):40000 Pcs/Day•Disposable Plastic Syringes (5 ml Size):40000 Pcs/Day

Plant and Machinery cost:

Rs 490 Lakhs

Working Capital :

-

Rate of Return (ROR):

15.24

Break Even Point (BEP):

61.07

TCI :

Cost of Project:Rs 757 Lakhs

Cost of Project :

75700000

Make An Appointment

Talk to Our Experts Today!

appoinment