Reach Us
Niir Project Consultancy Services (NPCS)
AN ISO 9001 : 2015 CERTIFIED COMPANY
106-E, Kamla Nagar,Opposite Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com,
info@entrepreneurindia.co
Tel: 91-11-23843955, 23845654, 23845886, +91-8800733955
Mobile: +91-9811043595
Fax: 91-11-23845886
Web: www.entrepreneurindia.co
  • Join Us On
Reach Us
Quick Enquiry
 
   
   
Quick Enquiry
 
 

Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in 2015 according to a study by Frost & Sullivan. During the period, consumption of electrical equipment is estimated to increase from over USD 28 billion now to USD 363 billion, growing at a CAGR of about 30%. It is also expected that during 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production.

The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. The equipments and accessories under these segments include motors, turbines, generators, switchgears, transformers, circuit breakers, induction motors, power capacitors, meters, transmission towers. Besides these, the spectrum covers a whole range of power cables including XLPE and AAC and ACSR conductors and electrical consumer products like fans, electric lamps, exhausts and domestic appliances and accessories. Inverters, gensets, UP also fall under its domain.

The electrical industry has been showing signs of recovery after poor performance in the recent years. The domestic electrical industry, which includes equipment for generation, transmission, distribution and use of power in industrial units, constitutes a major part of the electrical products.

The growth of the industry is directly related to the development of power generation and distribution. India's generation capacity of 2,300 MW in 1950 expanded to over 116,500 MW including non-utilities at the end 2000-01. The total installed capacity of electric power generation further increased to 141,080 MW in 2007-08 (upto January 2008) compared to a capacity of 128,000 MW during the same period in 2006-07. The Eleventh Plan has targeted a capacity addition of 78,570 MW.

The five years (2007-2012) may be the best of times for power equipment makers with the power sector on an expansion spree. With order-book growth expanding over the last three years, there is a good chance that this will continue. Close to 82% of the planned generation capacity for the Tenth Plan was either implemented or was in the process of being implemented. Even assuming a 70% implementation ratio for the Eleventh Plan, close to 55,000 MW will be added. Five ultra mega power projects, totaling 20,000 MW are coming up in 2008. In the transmission sector, for example, Power Grid Corporation is planning a capex of Rs 710 billion by 2010.

Earlier, the shortfalls in achieving the Plan targets of addition to power generation and up-gradation of transmission and distribution had adversely affected the electrical equipment industry. The peak shortage which was over 11% of the requirement in 2003-04 increased to 11.7% in 2004-05 and to over 12% in 2005-06. The shortage further rose to about 14% in 2006-07. In the ten months of 2007-08 the peak shortage had risen to over 15% of the peak demand of 107,010 MW.

Major players in electrical equipment segment are ABB, BHEL, BHEL Power Solutions, Havell's India, Kirloskar Electric, Crompton Greaves and Suzlon Energy.

According to the Power Ministry, the power sector has tied up Rs 2,240 billion worth of investments to build power plants with 70,000 MW capacities in the next three years.

With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Voltage Stabilizer using IC Timer
Voltage Stabilizer using IC Timer
Stabilizer are widely used to provide stabilized voltage to various items like Regrigerator, Television, Typewriter, and for various household purpose... Read More
Capacity : 60 Nos./Day
Plant and Machinery cost: 4.00 Lakhs
Working Capital : 9.00
Rate of Return (ROR):64.82%
Break Even Point (BEP):40.62 %
TCI :21.00 Lakhs
Cost of Project : 21.00Lakhs
Add To Inquiry Basket
PRE-COMPRESSED PRESSBOARD
PRE-COMPRESSED PRESSBOARD

Pre compressed press board is special type board. It has specialty use in the floor of special electrical instrument like transformer. Specificatio... Read More

Capacity : 300000 Sq. Mt./Annum
Plant and Machinery cost: 61.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.00%
Break Even Point (BEP):53.00 %
TCI :157.00 Lakhs
Cost of Project : 157.00Lakhs
Add To Inquiry Basket
Alternator
Alternator
The electrical machine which generates alternating currents, is known as A.C. generator or alternator. It consists of two parts essentially, magnet sy... Read More
Capacity : 240 Alternators/Annum
Plant and Machinery cost: 4.00 Lakhs
Working Capital : 9.00
Rate of Return (ROR):26.70%
Break Even Point (BEP):62.33 %
TCI :30.00 Lakhs
Cost of Project : 30.00Lakhs
Add To Inquiry Basket
Dry Cell
Dry Cell
A dry cell battery is a device, which converse chemical energy into electrical energy based on size. The growth of pencil-size battery is enormous in ... Read More
Capacity : 400 Nos/Day
Plant and Machinery cost: 4.00 Lakhs
Working Capital : 10.00
Rate of Return (ROR):45.12%
Break Even Point (BEP):50.39 %
TCI :21.00 Lakhs
Cost of Project : 21.00Lakhs
Add To Inquiry Basket
Multilayer Printed Circuit Boards
Multilayer Printed Circuit Boards

Printed circuits are components in almost all electronic assemblies. Printed circuit board are metal clad laminates that are used to define wiring ... Read More

Capacity : 60.0 Sq. mts./Day
Plant and Machinery cost: 75.00 Lakhs
Working Capital : 40.00
Rate of Return (ROR):50.30%
Break Even Point (BEP):43.89 %
TCI :144.00 Lakhs
Cost of Project : 144.00Lakhs
Add To Inquiry Basket
Microwave Oven
Microwave Oven
Microwave ovens are the latest addition to the range of electronic consumer products. These ovens are used to cook, roast, steam, thaw, stew, bake, re... Read More
Capacity : 25 Nos/Day
Plant and Machinery cost: 16.00 Lakhs
Working Capital : 48.00
Rate of Return (ROR):70.52%
Break Even Point (BEP):37.72 %
TCI :85.00 Lakhs
Cost of Project : 85.00Lakhs
Add To Inquiry Basket
Wind Mill
Wind Mill

Non-conventional and renewable sources of energy have come to assume tremendous significance both as alternative or substitute and also as viable s... Read More

Capacity : 30 Nos./Day
Plant and Machinery cost: 17.00 Lakhs
Working Capital : 86.00
Rate of Return (ROR):52.70%
Break Even Point (BEP):40.81 %
TCI :137.00 Lakhs
Cost of Project : 137.00Lakhs
Add To Inquiry Basket
Rosin Cored Soft Soldering Wire
Rosin Cored Soft Soldering Wire

Soldering is a process of joining solid components by introduction between them a molten alloy (solder) having a lower melting poing than that of ... Read More

Capacity : 500 Kg Soldering Wire/Day
Plant and Machinery cost: 38.40 Lakhs
Working Capital : 86.65
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :35.70 Lakhs
Cost of Project : 35.70Lakhs
Add To Inquiry Basket
Immersion Heater
Immersion Heater
The immersion heater is very popular electric device used for domestic as well as industrial purposes. In industry it is used for spattering & to conc... Read More
Capacity : 200 Nos./Day
Plant and Machinery cost: 2.00 Lakhs
Working Capital : 28.00
Rate of Return (ROR):75.00%
Break Even Point (BEP):39.00 %
TCI :36.00 Lakhs
Cost of Project : 36.00Lakhs
Add To Inquiry Basket
Printed Circuit Board
Printed Circuit Board
Printed circuit board (PCB) are metal clad laminates that are used to define wiring scheme for an electronic circuit. It consists of an insulating lam... Read More
Capacity : 14.00 Sq.M./Day
Plant and Machinery cost: 7.00 Lakhs
Working Capital : 12.00
Rate of Return (ROR):38.07%
Break Even Point (BEP):53.16 %
TCI :36.00 Lakhs
Cost of Project : 36.00Lakhs
Add To Inquiry Basket
Electronic Digital Weighing Machine
Electronic Digital Weighing Machine

Automatic production in industry has brought increasing need for high speed weighing information for election or control should be available at a r... Read More

Capacity : 50 Nos./Day
Plant and Machinery cost: 6.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):55.00%
Break Even Point (BEP):32.00 %
TCI :147.00 Lakhs
Cost of Project : 147.00Lakhs
Add To Inquiry Basket
Plastic Cards For Telephone
Plastic Cards For Telephone

Telephone plastic card are made by using either PVC, or cellulose acetate or by using polyaniline resin. Above the polymer resin there is use of ma... Read More

Capacity : 2000 Telephone Card/Day
Plant and Machinery cost: 10.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):67.00%
Break Even Point (BEP):32.00 %
TCI :91.00 Lakhs
Cost of Project : 91.00Lakhs
Add To Inquiry Basket
Selenium Coated Aluminium Drum Used In Plain Paper Copier
Selenium Coated Aluminium Drum Used In Plain Paper Copier

Selenium is a non-metallic element. Its name was derived from selene (moon, in Greek). The element has been found in cavities of vesuvian lavas and... Read More

Capacity : 400 Nos./Day (Thickness Of Coating 1 Mm. Length Of Drum 20 Inch, Diameter Of Drum 10 Inch.)
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):44.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Insulator (Made by Fiber glass & Reinforced Plastics by Hand Moulding Press)
Insulator (Made by Fiber glass & Reinforced Plastics by Hand Moulding Press)

For the manufacture of insulator basic raw materials used are glass fibre, reinforced plastics, calcium carbonate and pigments etc. all the raw mat... Read More

Capacity : 60000Kgs/Annum
Plant and Machinery cost: 13.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):49.00 %
TCI :61.00 Lakhs
Cost of Project : 61.00Lakhs
Add To Inquiry Basket
Miniature Circuit Breaker (MCB)
Miniature Circuit Breaker (MCB)

Miniature circuit breakers are modern protection devices for electrical equipments in abnormal conditions such as overload current and short circui... Read More

Capacity : 900.00 NOS/day
Plant and Machinery cost: 71.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):56.00%
Break Even Point (BEP):40.00 %
TCI :165.00 Lakhs
Cost of Project : 165.00Lakhs
Add To Inquiry Basket
Electric Switches, Plugs, Sockets and Other Accessories
Electric Switches, Plugs, Sockets and Other Accessories

Electric switches, plugs, sockets and other accessories etc. are nothing but electric fitting which are quite familiar to the people as it is found... Read More

Capacity : 1750 Nos./Day
Plant and Machinery cost: 2.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):51.00%
Break Even Point (BEP):54.00 %
TCI :20.00 Lakhs
Cost of Project : 20.00Lakhs
Add To Inquiry Basket
Distribution Transformers
Distribution Transformers

The manufacturing process of distribution transformers are quite similar to the process of power transformers. It consist of laminating cores, enam... Read More

Capacity : 1 Nos./Day
Plant and Machinery cost: 40.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):43.00%
Break Even Point (BEP):42.00 %
TCI :209.00 Lakhs
Cost of Project : 209.00Lakhs
Add To Inquiry Basket
Nylon Coating on Zinc Wire (Wire “O“ Wire)
Nylon Coating on Zinc Wire (Wire “O“ Wire)

Polyamides are a group of thermoplastic polymers containing amid groups in the main chain. They are popularly known as Nylons, which is the trade ... Read More

Capacity : 20000 Meters/day
Plant and Machinery cost: 45.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):38.00%
Break Even Point (BEP):48.00 %
TCI :211.00 Lakhs
Cost of Project : 211.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Voltage Stabilizer using ... 60 Nos./Day 64.82 21.00
PRE-COMPRESSED PRESSBOARD 300000 Sq. Mt./Annum 38.00 157.00
Alternator 240 Alternators/Annum 26.70 30.00
Dry Cell 400 Nos/Day 45.12 21.00
Multilayer Printed Circui... 60.0 Sq. mts./Day 50.30 144.00
Microwave Oven 25 Nos/Day 70.52 85.00
Wind Mill 30 Nos./Day 52.70 137.00
Rosin Cored Soft Solderin... 500 Kg Soldering Wire/Day 0.00 35.70
Immersion Heater 200 Nos./Day 75.00 36.00
Printed Circuit Board 14.00 Sq.M./Day 38.07 36.00
Electronic Digital Weighi... 50 Nos./Day 55.00 147.00
Plastic Cards For Telepho... 2000 Telephone Card/Day 67.00 91.00
Selenium Coated Aluminium... 400 Nos./Day (Thickness Of Coating 1 Mm. Length Of Drum 20 Inch, Diameter Of Drum 10 Inch.) 44.00 0.00
Insulator (Made by Fiber ... 60000Kgs/Annum 34.00 61.00
Miniature Circuit Breaker... 900.00 NOS/day 56.00 165.00
Electric Switches, Plugs,... 1750 Nos./Day 51.00 20.00
Distribution Transformers 1 Nos./Day 43.00 209.00
Nylon Coating on Zinc Wir... 20000 Meters/day 38.00 211.00
COMPACT COPPER TUBE LIGHT... 1000 Nos./Day 47.00 83.00
ELECTRICAL STAMPING 1 MT/day 45.00 100.00
Copper Wire Drawing, Anne... 1 MT / day 47.00 209.00
POWER TRANSFORMER UPTO 40... 1 No./day 52.00 717.00
Solar Photovoltaic System 0 0.00 0.00
Power Cable 2050 MT Aluminium Power Cable/Annum 350 MT Copper Power Cable/Annum 45.00 305.00
Solar Power Plant 0 0.00 0.00
Maintenance Free Recharge... 834 Nos./day 52.00 1179.00
Electric Motors 2 Nos./day 37.00 256.00
Inverters 50Hz 100 to 100... 80 Nos./day 55.00 1030.00
R-F Coaxial Cable 20000 Meters/Day 43.00 400.00
REWINDING OF BURNT ELECTR... 8.00 Motors / Day 47.00 62.00
123456
« Back1 2 3 4 5Next »

Showing 1 - 18 of 152 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

 

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report,  Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

 


And before diversifying/venturing into any product, wish to study the following aspects of the identified product:


• Good Present/Future Demand
• Export-Import Market Potential
• Raw Material & Manpower Availability
• Project Costs and Payback Period


We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

 

The report contains all the data which will help an entrepreneur find answers to questions like:

• Why I should invest in this project?
• What will drive the growth of the product?
• What are the costs involved?
• What will be the market potential?


The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product.

The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.


Reasons for buying the report:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.

• This report provides vital information on the product like its definition, characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

 

Our Approach:


• Our research reports broadly cover Indian markets, present analysis, outlook and forecast.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players. 

• We use reliable sources of information and databases.  And information from such sources is processed by us and included in the report.

 

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

 

 

Ø  Introduction

·         Project Introduction

·         Project Objective and Strategy

·         Concise History of the Product

·         Properties

·         BIS (Bureau of Indian Standards) Provision & Specification

·         Uses & Applications

 

Ø  Market Study and Assessment

·         Current Indian Market Scenario

·         Present Market Demand and Supply

·         Estimated Future Market Demand and Forecast

·         Statistics of Import & Export

·         Names & Addresses of Existing Units (Present Players)

·         Market Opportunity

 

Ø  Raw Material

·         List of Raw Materials

·         Properties of Raw Materials

·         Prescribed Quality of Raw Materials

·         List of Suppliers and Manufacturers

 

Ø  Personnel (Manpower) Requirements

·         Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

 

Ø  Plant and Machinery

·         List of Plant & Machinery

·         Miscellaneous Items

·         Appliances & Equipments

·         Laboratory Equipments & Accessories

·         Electrification

·         Electric Load & Water

·         Maintenance Cost

·         Sources of Plant & Machinery (Suppliers and Manufacturers)

 

Ø  Manufacturing Process and Formulations

·         Detailed Process of Manufacture with Formulation

·         Packaging Required

·         Process Flow Sheet Diagram

 

Ø  Infrastructure and Utilities

·         Project Location

·         Requirement of Land Area

·         Rates of the Land

·         Built Up Area

·         Construction Schedule

·         Plant Layout and Requirement of Utilities

 

Project at a Glance

Along with financial details as under:

 

  •     Assumptions for Profitability workings

  •    Plant Economics

  •    Production Schedule

  •    Land & Building

            Factory Land & Building

            Site Development Expenses

  •    Plant & Machinery

             Indigenous Machineries

            Other Machineries (Miscellaneous, Laboratory etc.)

  •    Other Fixed Assets

            Furniture & Fixtures

            Pre-operative and Preliminary Expenses

            Technical Knowhow

            Provision of Contingencies

  •   Working Capital Requirement Per Month

             Raw Material

            Packing Material

            Lab & ETP Chemical Cost

           Consumable Store

  •   Overheads Required Per Month And Per Annum

         Utilities & Overheads (Power, Water and Fuel Expenses etc.)

             Royalty and Other Charges

            Selling and Distribution Expenses

  •    Salary and Wages

  •    Turnover Per Annum

  •   Share Capital

            Equity Capital

            Preference Share Capital

 

  •    Annexure 1:: Cost of Project and Means of Finance

  •    Annexure 2::  Profitability and Net Cash Accruals

                Revenue/Income/Realisation

                Expenses/Cost of Products/Services/Items

                Gross Profit

                Financial Charges     

                Total Cost of Sales

                Net Profit After Taxes

                Net Cash Accruals

  •   Annexure 3 :: Assessment of Working Capital requirements

                Current Assets

                Gross Working. Capital

                Current Liabilities

                Net Working Capital

                Working Note for Calculation of Work-in-process

  •    Annexure 4 :: Sources and Disposition of Funds

  •    Annexure 5 :: Projected Balance Sheets

                ROI (Average of Fixed Assets)

                RONW (Average of Share Capital)

                ROI (Average of Total Assets)

  •    Annexure 6 :: Profitability ratios

                D.S.C.R

                Earnings Per Share (EPS)

               

             Debt Equity Ratio

        Annexure 7   :: Break-Even Analysis

                Variable Cost & Expenses

                Semi-Var./Semi-Fixed Exp.

                Profit Volume Ratio (PVR)

                Fixed Expenses / Cost 

                B.E.P

  •   Annexure 8 to 11:: Sensitivity Analysis-Price/Volume

            Resultant N.P.B.T

            Resultant D.S.C.R

   Resultant PV Ratio

   Resultant DER

  Resultant ROI

          Resultant BEP

  •    Annexure 12 :: Shareholding Pattern and Stake Status

        Equity Capital

        Preference Share Capital

  •   Annexure 13 :: Quantitative Details-Output/Sales/Stocks

        Determined Capacity P.A of Products/Services

        Achievable Efficiency/Yield % of Products/Services/Items 

        Net Usable Load/Capacity of Products/Services/Items   

       Expected Sales/ Revenue/ Income of Products/ Services/ Items   

  •    Annexure 14 :: Product wise domestic Sales Realisation

  •    Annexure 15 :: Total Raw Material Cost

  •    Annexure 16 :: Raw Material Cost per unit

  •    Annexure 17 :: Total Lab & ETP Chemical Cost

  •    Annexure 18  :: Consumables, Store etc.,

  •    Annexure 19  :: Packing Material Cost

  •    Annexure 20  :: Packing Material Cost Per Unit

  •    Annexure 21 :: Employees Expenses

  •    Annexure 22 :: Fuel Expenses

  •    Annexure 23 :: Power/Electricity Expenses

  •    Annexure 24 :: Royalty & Other Charges

  •    Annexure 25 :: Repairs & Maintenance Exp.

  •    Annexure 26 :: Other Mfg. Expenses

  •    Annexure 27 :: Administration Expenses

  •    Annexure 28 :: Selling Expenses

  •    Annexure 29 :: Depreciation Charges – as per Books (Total)

  •   Annexure 30   :: Depreciation Charges – as per Books (P & M)

  •   Annexure 31   :: Depreciation Charges - As per IT Act WDV (Total)

  •   Annexure 32   :: Depreciation Charges - As per IT Act WDV (P & M)

  •   Annexure 33   :: Interest and Repayment - Term Loans

  •   Annexure 34   :: Tax on Profits

  •   Annexure 35   ::Projected Pay-Back Period And IRR