Since such an era of industrial tradition revealed a mix of all the necessary for a winning industry— a base of production, natural resources, a low-cost trained workforce, and subsequent access to infrastructure development. A specifically chosen policy for diversifying industry and not to take as far as sustainable mining, agro-based industries, and renewable power revealed the following outcome. This, along with establishing logistic parks for entity transportation, an interval policy established the most effective value and efficacy of industry. Such a new tendency in industry is so modern that giant fields included an intention in advancing their line— manufacturing, metallurgy, food processing, the fields of textile and information technology and clean technology.
One, minerals and metals. The mineral deposits of Jharkhand make steel, cement, refractory, and metal fabrication industries feasible. In addition, the state has extensive coal reserves, and further holds iron-ore, bauxite, copper and the potential for value-added metallurgy, alloy and downstream industries.
Two, agriculture and forestry. The reputation of the state’s soil as being fertile along with the sufficient availability of water allows producing pulses, maize, vegetables, lac, and medicinal plants. A few possibilities also exist for Jharkhand in food processing, organic farming, and herbal product manufacturing. And three, energy and water resources. Jharkhand generates more than 4,000 MW of electricity and holds considerable potential in hydel, solar, and biomass. The power-intensive industries also benefit from the availability and relatively low prices of electricity.
The Jharkhand Government issued exhaustive Fiscal and Non-Fiscal incentives:
- Capital Investment Subsidy: 25-35% of fixed capital investment.
- Power Tariff Rebate: Rs1.00 per unit for 5 years.
- SGST Reimbursement: 100% for 7-10 years.
- Interest Subsidy: 6% on Term Loans for 5 years.
- Stamp Duty Exemption: 100% for land purchase/lease for industries.
- Employment Subsidy: Rs5000 p/m for local employees for 5 years.
- Transport Subsidy: 50% freight rebate for inter-state exports..
- Women/ST/SC Entrepreneurs and MSME Entrepreneurs: MSDP 5-10% of capital subsidy.
The combination of minerals, manpower, and manufacturing facilitated Jharkhand state with immense business potential and resulted in it hosting a unique mix of these factors. The state boasts well-established industrial infrastructure, progressive policies, and enormous natural resources, making it one of Eastern India’s most lucrative investment destinations. Potential for profitable, sustainable business ventures includes:
- Steel & Metal Industries
- Agro and Food Processing
- Textiles & Handicrafts
- Renewable Energy
- Tourism and IT Services
Given the high returns, geographical advantages, and various governmental benefits, Jharkhand is undoubtedly among the top prospects for making India’s nationwide headway in business development and industrial entrepreneurship.
Please choose a project below related to this category.
A scalpel is a small but extremely sharp knife used for surgery, anatomical dissection, and various arts and crafts. Scalpels may be disposable or re-...
|
Capacity : 40000 Pcs/Day |
Plant and Machinery cost: Rs 140 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project:Rs 210 Lakhs (Land & Building) |
|
Cost of Project : 21000000 |
Autoclaved Aerated Concrete (AAC) is a non-combustible, lime-based, cementitious building material that is expanding into new worldwide markets. As a...
|
Capacity : 500 Cu. Mt/Day |
Plant and Machinery cost: Rs 542 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.36 |
|
Break Even Point (BEP): 50.87 |
TCI : Cost of Project:Rs 1187 Lakhs |
|
Cost of Project : 118700000 |
Wood plastic composites (WPCs) are roughly 50:50 mixtures of thermoplastic polymers and small wood particles. The wood and thermoplastics are usually...
|
Capacity : 4923 Sq. Ft/Day |
Plant and Machinery cost: Rs 173 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.67 |
|
Break Even Point (BEP): 54.70 |
TCI : Cost of Project:Rs 557 Lakhs |
|
Cost of Project : 55700000 |
In modern steelmaking and casting plants, steel is produced either in a basic oxygen furnace (BOF) or in an electric arc furnace (EAF). In a BOF, hot...
|
Capacity : 12 Mt/Day |
Plant and Machinery cost: Rs 8 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 17.59 |
|
Break Even Point (BEP): 64.56 |
TCI : Cost of Project:Rs 77 Lakhs |
|
Cost of Project : 7700000 |
In India dairying has been practiced as a rural cottage industry since the remote past. Semi commercial dairying started with the establishment of mil...
|
Capacity : Cows: 250 Nos • Pasturised Milk (1 Ltr & 500 ml Packs):6000 Ltrs/Day •Curd (250 ml Cups & Pouch Packs):4000 Ltrs/ Day |
Plant and Machinery cost: Rs 277 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.72 |
|
Break Even Point (BEP): 47.38 |
TCI : Cost of Project:Rs 605 Lakhs |
|
Cost of Project : 60500000 |
PET-bottles more and more replace glass bottles in the beverage and food sector. The success of PET in comparison to glass is based on several economi...
|
Capacity : 24 Mt/Day |
Plant and Machinery cost: Rs 290 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.84 |
|
Break Even Point (BEP): 64.95 |
TCI : Cost of Project:Rs 737 Lakhs |
|
Cost of Project : 73700000 |
Shrink sleeve labels are sleeves constructed from film material that, rather than using adhesive, shrinks to a product’s surface when heat is applied....
|
Capacity : PVC Shrink Sleeves:400 Pkts/Day |
Plant and Machinery cost: Rs 72 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 13.16 |
|
Break Even Point (BEP): 66.91 |
TCI : Cost of Project:Rs 202 Lakhs |
|
Cost of Project : 20200000 |
A double wall pipe is the most common corrugated pipe design for drainage and sewage. Various different designs of pipes are available, such as single...
|
Capacity : 20 Mt/Day |
Plant and Machinery cost: Rs 808 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.25 |
|
Break Even Point (BEP): 51.34 |
TCI : Cost of Project:Rs 1510 Lakhs |
|
Cost of Project : 151000000 |
Many fast food items have flooded the markets but noodles have emerged as the most popular item as it is cheaper, very easy to make and nutritious. Ur...
|
Capacity : Instant Noodles (75 gms Pouches):5000 Kgs/Day |
Plant and Machinery cost: Rs 125 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.83 |
|
Break Even Point (BEP): 54.21 |
TCI : Cost of Project:Rs 386 Lakhs |
|
Cost of Project : 386 |
A sock is an item of clothing worn on the feet. The foot is among the heaviest producers of sweat in the body, as it can produce over 0.25 US pints (0...
|
Capacity : Cotton Socks:600 Doz Pairs/Day •Nylon Socks:400 Doz Pairs/Day |
Plant and Machinery cost: Rs 255 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.43 |
|
Break Even Point (BEP): 55.18 |
TCI : Cost of Project:Rs 440 Lakhs |
|
Cost of Project : 44000000 |
Surgical gloves are personal protection equipment (PPE) designed to protect clinicians in operating room (OR) environments. The primary purpose of sur...
|
Capacity : 8000 Pairs/Day |
Plant and Machinery cost: Rs 160 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.36 |
|
Break Even Point (BEP): 48.83 |
TCI : Cost of Project:Rs 301 Lakhs |
|
Cost of Project : 30100000 |
A hospital as a health care organization has been defined in varied terms as an institution involved in preventive, curative/ameliorative, palliative...
|
Capacity : 150 Beds |
Plant and Machinery cost: Rs 1486 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.33 |
|
Break Even Point (BEP): 40.12 |
TCI : Cost of Project:Rs 6203 Lakhs |
|
Cost of Project : 620300000 |