Since such an era of industrial tradition revealed a mix of all the necessary for a winning industry— a base of production, natural resources, a low-cost trained workforce, and subsequent access to infrastructure development. A specifically chosen policy for diversifying industry and not to take as far as sustainable mining, agro-based industries, and renewable power revealed the following outcome. This, along with establishing logistic parks for entity transportation, an interval policy established the most effective value and efficacy of industry. Such a new tendency in industry is so modern that giant fields included an intention in advancing their line— manufacturing, metallurgy, food processing, the fields of textile and information technology and clean technology.
One, minerals and metals. The mineral deposits of Jharkhand make steel, cement, refractory, and metal fabrication industries feasible. In addition, the state has extensive coal reserves, and further holds iron-ore, bauxite, copper and the potential for value-added metallurgy, alloy and downstream industries.
Two, agriculture and forestry. The reputation of the state’s soil as being fertile along with the sufficient availability of water allows producing pulses, maize, vegetables, lac, and medicinal plants. A few possibilities also exist for Jharkhand in food processing, organic farming, and herbal product manufacturing. And three, energy and water resources. Jharkhand generates more than 4,000 MW of electricity and holds considerable potential in hydel, solar, and biomass. The power-intensive industries also benefit from the availability and relatively low prices of electricity.
The Jharkhand Government issued exhaustive Fiscal and Non-Fiscal incentives:
- Capital Investment Subsidy: 25-35% of fixed capital investment.
- Power Tariff Rebate: Rs1.00 per unit for 5 years.
- SGST Reimbursement: 100% for 7-10 years.
- Interest Subsidy: 6% on Term Loans for 5 years.
- Stamp Duty Exemption: 100% for land purchase/lease for industries.
- Employment Subsidy: Rs5000 p/m for local employees for 5 years.
- Transport Subsidy: 50% freight rebate for inter-state exports..
- Women/ST/SC Entrepreneurs and MSME Entrepreneurs: MSDP 5-10% of capital subsidy.
The combination of minerals, manpower, and manufacturing facilitated Jharkhand state with immense business potential and resulted in it hosting a unique mix of these factors. The state boasts well-established industrial infrastructure, progressive policies, and enormous natural resources, making it one of Eastern India’s most lucrative investment destinations. Potential for profitable, sustainable business ventures includes:
- Steel & Metal Industries
- Agro and Food Processing
- Textiles & Handicrafts
- Renewable Energy
- Tourism and IT Services
Given the high returns, geographical advantages, and various governmental benefits, Jharkhand is undoubtedly among the top prospects for making India’s nationwide headway in business development and industrial entrepreneurship.
Please choose a project below related to this category.
Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, although many can also be used...
|
Capacity : 360,000 kgs./annum |
Plant and Machinery cost: 26 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 29.00 |
|
Break Even Point (BEP): 44.00 |
TCI : Cost of Project: 181 lakhs |
|
Cost of Project : 18100000 |
These HDPE pipes and fittings have a high degree of corrosion resistance, are light in weight. Yet tough and durable, have excellent, hydraulic proper...
|
Capacity : 1,440,000 Kgs. /annum |
Plant and Machinery cost: 58 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project: Rs357 lakhs |
|
Cost of Project : 35700000 |
Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic Equipment" ("WEEE") is a description of surplus, obsolete, broken or disc...
|
Capacity : 7500 MT/annum |
Plant and Machinery cost: 131 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 30.00 |
TCI : Cost of Project: 272 lakhs |
|
Cost of Project : 127200000 |
Chloroacetic Acid, industrially known as Monochloro Acetic Acid (MCA) is the organochlorine compound with the formula ClCH2CO2H. This carboxylic acid...
|
Capacity : 24,000 MT/annum |
Plant and Machinery cost: 313 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 46.00 |
TCI : Cost of Project: 980 lakhs |
|
Cost of Project : 98000000 |
Disposable cups, glasses, plates and spoons are used in daily life nowadays. In addition to be used at home these are largely used during at parties a...
|
Capacity : Thermocol Plates: 15,000 Th. Nos/annum Thermocol Dona: 15,000 Th. Nos/annum ThermocolThali:15,000 Th. Nos/annum Thermocol Glass:15,000 Th. Nos/annum Paper |
Plant and Machinery cost: Rs 105 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs 405 lakhs |
|
Cost of Project : 40500000 |
Activated carbon in any form of carbon shows high absorptivity for gases, vapours and colloidal solids in either the gas ion or liquid phase. It is av...
|
Capacity : Activated Carbon :900 MT/annum Bio-Oil by Product:1,140 MT/annum |
Plant and Machinery cost: Rs 129 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 59.00 |
TCI : Cost of Project: Rs 283 lakhs |
|
Cost of Project : 28300000 |
A safety razor is a shaving implement with a protective device positioned between the edge of the blade and the skin. The initial purpose of these pro...
|
Capacity : Multiblade Safety Razor (2 Blade): 86,400,000 Nos/annum |
Plant and Machinery cost: Rs 313 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project : Rs 826 lakhs |
|
Cost of Project : 82600000 |
Surgical cotton is also known as absorbent cotton” or “cotton wool”. Surgical/Absorbent cotton is cleared de-oiled and bleached cotton packed in diffe...
|
Capacity : Surgical Cotton :300,000kgs/annum |
Plant and Machinery cost: Rs 69 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs 238 lakhs |
|
Cost of Project : 23800000 |
Mustard/Rapeseed oil is the third largest edible oil produced in the world after Soy oil and Palm oil. At a production level of 13-14 million tons, it...
|
Capacity : Mustard Oil:3000 MT/annum Deoiled cake:5,700 MT/annum |
Plant and Machinery cost: Rs 83 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project: Rs 373 lakhs |
|
Cost of Project : 37300000 |
The key strength of LED lighting is reduced power consumption. LED’s are available with at the most Lumen efficiency of 110 Lum/Watt compared to 65-80...
|
Capacity : :132,000 Pcs/annum |
Plant and Machinery cost: Rs 18 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 73.00 |
TCI : Cost of Project: Rs 129 lakhs |
|
Cost of Project : 12900000 |
Mahualongifolia is an Indian tropical tree found largely in the central and north Indian plains and forests. It is commonly known as mahua, mahwa or I...
|
Capacity : Wine (750 ml Size):4,000,000 Bottles/annum Whiskey (375 ml Size):4,000,000 Bottles/annum Brandy (375 ml Size):4,000,000 Bottles/annum |
Plant and Machinery cost: Rs 524 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 40.00 |
TCI : Cost of Project: Rs 3019 lakhs |
|
Cost of Project : 301900000 |
Blade manufacture is an important industry in several of the industrially advanced countries of the world. Carbon steel blades made from high carbon s...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |