Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.

 

INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

Please choose a project below related to this category.

Essential Oil Extraction (Jasmine and Tuberose)
Essential Oil Extraction (Jasmine and Tuberose)

Essential oils, also called volatile odoriferous oil, are aromatic oily liquids extracted from different parts of plants, for example, leaves, peels,...

Capacity :

Jasmine Oil (5 ml Size Pack): 750Ltrs/annum Tuberose Oil (5 ml Size Pack): 750Ltrs/annum

Plant and Machinery cost:

18 lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

74.00

TCI :

Cost of Project: Rs 342lakhs

Cost of Project :

342100000

Dehydrated Onion
Dehydrated Onion

Onion is one of the most important commercial vegetable crops grown in India. It contains vitamin B and a trace of vitamin C and also traces of iron a...

Capacity :

Dehydrated Onion Sliced/Chopped: 1000Mt/annum Cattle Feed as by product : 700Mt/annum

Plant and Machinery cost:

79 lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

55.00

TCI :

Cost of Project : Rs 236 lakhs

Cost of Project :

23600000

Electric Motors
Electric Motors

An electric motor is a device converting electrical energy into mechanical energy (usually a torque). This conversion is usually obtained through the...

Capacity :

60,000 Nos/annum

Plant and Machinery cost:

60 lakhs

Working Capital :

-

Rate of Return (ROR):

29.00

Break Even Point (BEP):

64.00

TCI :

Cost of Project: Rs 313 lakhs

Cost of Project :

31300000

Electrical Power Transformers (Repair & Refurbishment)
Electrical Power Transformers (Repair & Refurbishment)

Transformer is a machine that transfers electrical energy from one electrical circuit to another without changing frequency by the principle of electr...

Capacity :

Repairs of 25 MVA Power Transformers : 60 Nos/Annum Repairs of 50 MVA Power Transformers: 36 Nos/Ann.......

Plant and Machinery cost:

33 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

65.00

TCI :

Cost of Project 200 Lakhs

Cost of Project :

20000000

Sheet Metal Components for Automobile Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities
Sheet Metal Components for Automobile Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metal working and it can be cu...

Capacity :

Auto Sheet Metal Components : 600MT/Annum Metal Scraps : 6MT/Annu....

Plant and Machinery cost:

90 Lakhs

Working Capital :

-

Rate of Return (ROR):

30.00

Break Even Point (BEP):

64.00

TCI :

Cost of Project 176 Lakhs

Cost of Project :

17600000

Production of Soft Gelatin Capsules (Softgel Capsules) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study
Production of Soft Gelatin Capsules (Softgel Capsules) Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Soft gelatin (also called softgel or soft elastic) capsules consist of one piece hermetically-sealed soft shells. Soft gelatin capsules are prepared b...

Capacity :

1,800,000 Th.Nos./annum

Plant and Machinery cost:

261 Lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

57.00

TCI :

Cost of Project 478 Lakhs

Cost of Project :

47800000

Sweat Free and Antibacterial Socks
Sweat Free and Antibacterial Socks

A sock is an item of clothing worn on the feet and often covering the ankle or some part of the calf. The foot is among the heaviest producers of swea...

Capacity :

450,000 Pairs/annum

Plant and Machinery cost:

42 Lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

66.00

TCI :

Cost of Project 161 Lakhs

Cost of Project :

16100000

Production of Tomato Puree and Fruit Concentrate with Hot Break Process Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study
Production of Tomato Puree and Fruit Concentrate with Hot Break Process Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Tomato is one of the most important "protective foods" because of its special nutritive value. Tomato concentrate that contains no less than 7% but le...

Capacity :

Tomato Puree : 600 MT/annum Tomato Concentrate : 300 MT/annum Mango Concentrate : 300 MT/annum.......

Plant and Machinery cost:

136 Lakhs

Working Capital :

-

Rate of Return (ROR):

28.00

Break Even Point (BEP):

57.00

TCI :

Cost of Project 521 Lakhs

Cost of Project :

52100000

Vacuum Fried Snacks:Vacuum Fried Vegetable Chips  (Sweet Potato, Beans and Beetroot)
Vacuum Fried Snacks:Vacuum Fried Vegetable Chips (Sweet Potato, Beans and Beetroot)

Vegetable chips (also referred to as veggie chips) are chips or crisps that are prepared using vegetables. Vegetable chips may be fried, deep-fried, d...

Capacity :

Sweet potato : 120 kg/day Beat root : 80 kg/day Beans chips : 266 kg/day

Plant and Machinery cost:

83 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

59.00

TCI :

Cost of Project : Rs 209 Lakhs

Cost of Project :

20900000

Spray Dried Fruit and Vegetables Juice Powder  Vegetables and Fruit Juice Powder (Spray Dried Pineapple Juice Powder, Spray Dried Orange Juice Powder, Dehydrated Beetroot Powder, Dehydrated Carrot Powder) Manufacturing Plant, Detailed Project Report
Spray Dried Fruit and Vegetables Juice Powder Vegetables and Fruit Juice Powder (Spray Dried Pineapple Juice Powder, Spray Dried Orange Juice Powder, Dehydrated Beetroot Powder, Dehydrated Carrot Powder) Manufacturing Plant, Detailed Project Report

Fruit juices are spray dried in order to have a long shelf life, reduces storage place requirement and lower cost of bulk packing. Fruit juice powders...

Capacity :

Spray Dried Pineapple Juice Powder : 500Kgs/day Spray Dried Orange Juice Powder : 168Kgs/day Dehydrated Beetroot Powder : 168Kgs/day Dehydrated Carrot Powder : 168 Kgs/day

Plant and Machinery cost:

220 lakhs

Working Capital :

-

Rate of Return (ROR):

27.00

Break Even Point (BEP):

58.00

TCI :

Cost of Project: 544 lakhs

Cost of Project :

54400000

Toughened Glass Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
Toughened Glass Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with no...

Capacity :

384000 Sq.Mt./Annum

Plant and Machinery cost:

280 Lakhs

Working Capital :

-

Rate of Return (ROR):

26.00

Break Even Point (BEP):

58.00

TCI :

Cost of Project 729 Lakhs

Cost of Project :

72900000

Wire Nail Manufacturing Industry, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics
Wire Nail Manufacturing Industry, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fastening purpose. Its use is so...

Capacity :

Wire Nail: 369,600 Kgs/annum Wire Scrap: 34,800 Kgs/annum

Plant and Machinery cost:

11 lakhs

Working Capital :

-

Rate of Return (ROR):

25.00

Break Even Point (BEP):

53.00

TCI :

Cost of Project: Rs 59 lakhs

Cost of Project :

5900000

Make An Appointment

Talk to Our Experts Today!

appoinment
Call Us WhatsApp