We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
This is the most common method of blow moulding. There are two possible methods, which may be used-intermittent extrusion or continuous extrusion. For...
|
Capacity : 2000.00 Nos/Day |
Plant and Machinery cost: 128 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 49.00 |
|
Break Even Point (BEP): 31.00 |
TCI : 547 LakhS |
|
Cost of Project : 0 |
Whether you are aware of it or not, Plastics play an important part in your life. Plastics versatility allow it to be used in everything from car part...
|
Capacity : 623 Meter/Day |
Plant and Machinery cost: 288 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 80.00 |
|
Break Even Point (BEP): 13.00 |
TCI : 21700 Lakhs |
|
Cost of Project : 0 |
The term clay has a double meaning and therefore should be defined when it is used. Clay is used both as a rock term and as a particle size term. As a...
|
Capacity : 9500 MT/Annum |
Plant and Machinery cost: 158 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 45.00 |
|
Break Even Point (BEP): 73.00 |
TCI : 289 Lakhs |
|
Cost of Project : 0 |
Plastic was once a dreaming product, now it is in the form of problem due to un-eco character of major plastic base products. Now all countries are in...
|
Capacity : 600 MT/Annum |
Plant and Machinery cost: 74 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 37.00 |
|
Break Even Point (BEP): 36.00 |
TCI : 189 Lakhs |
|
Cost of Project : 0 |
Recycling of waste has become a necessity for environmental as well as for economic reasons. Plastics wastes being recycled in our country for over th...
|
Capacity : 500 kg/day |
Plant and Machinery cost: Rs. 28.00 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 15.00 |
|
Break Even Point (BEP): 72.00 |
TCI : Rs. 65 Lakhs |
|
Cost of Project : 0 |
Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The sy...
|
Capacity : 3000 nos./Day |
Plant and Machinery cost: Rs. 164 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 36.00 |
|
Break Even Point (BEP): 49.00 |
TCI : Rs. 291 Lakhs |
|
Cost of Project : 0 |
The Rubber industry in the country is in the doldrums as it is unprepared to live and thrive under the present trade conditions. Rubber threads are g...
|
Capacity : 1,50,000 Kg of LTR/Annum |
Plant and Machinery cost: Rs. 12 Lakhs |
|
Working Capital : Rs 22 Lakhs |
Rate of Return (ROR): 37.00 |
|
Break Even Point (BEP): 56.00 |
TCI : Rs 57 Lakhs |
|
Cost of Project : 0 |
Bakelite is manufactured by condensation polymerization of phenol and formaldehyde. It is one of the most important and widely used thermosetting plas...
|
Capacity : 2 Ton/Day |
Plant and Machinery cost: Rs. 48 Lacs |
|
Working Capital : Rs. 68 Lacs |
Rate of Return (ROR): 34.84 |
|
Break Even Point (BEP): 49.47 |
TCI : Rs. 160 Lacs |
|
Cost of Project : 0 |
PVC pipe fittings are integral and essential parts of PVC piping system. They are required wherever PVC pipes are used. The efficiency of various PVC...
|
Capacity : 2.5 MT/Day |
Plant and Machinery cost: Rs. 40 Lakhs |
|
Working Capital : Rs. 129 Lakhs |
Rate of Return (ROR): 33.26 |
|
Break Even Point (BEP): 49.33 |
TCI : Rs. 224.0 Lakhs |
|
Cost of Project : 0 |
Epoxy resin based primer fall under paint, varnish & surface coating materials. The production of paint & varnishes in the year 1997-98 was 4,80,000 t...
|
Capacity : 150 MT/Annum |
Plant and Machinery cost: Rs. 8 Lacs |
|
Working Capital : - |
Rate of Return (ROR): 20.91 |
|
Break Even Point (BEP): 0.00 |
TCI : Rs. 34 Lacs |
|
Cost of Project : 0 |
The use of plastics and development of new ones have increased considerably. HDPE (high density poly ethylene) is a thermoplastic material and is moul...
|
Capacity : 4000 Containers/Day |
Plant and Machinery cost: Rs. 8 Lakhs |
|
Working Capital : Rs. 24 Lakhs |
Rate of Return (ROR): 39.44 |
|
Break Even Point (BEP): 51.71 |
TCI : Rs. 41 Lakhs |
|
Cost of Project : 0 |
The acrylic products are generally made from the methyl methacrylate monomer. These are generally moulded products such as allpins boxes, jewellery pa...
|
Capacity : 1 Ton/Day |
Plant and Machinery cost: Rs. 15 Lacs |
|
Working Capital : Rs. 17 Lacs |
Rate of Return (ROR): 27.41 |
|
Break Even Point (BEP): 54.05 |
TCI : Rs. 80 Lacs |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2017-. All rights reserved.
