We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
Now-a-days, the use of master batches is the most convenient way of colouring plastics. In master batches, pigment / additives in high concentration a...
|
Capacity : 300 MT / Annum |
Plant and Machinery cost: 29 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 42.00 |
|
Break Even Point (BEP): 54.00 |
TCI : Cost of Project : 82 Lakhs |
|
Cost of Project : 0 |
-
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 37.00 |
|
Break Even Point (BEP): 45.00 |
TCI : - |
|
Cost of Project : 0 |
-
|
Capacity : 6000 Sq. Mt. |
Plant and Machinery cost: Rs. 20 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 51.00 |
|
Break Even Point (BEP): 40.00 |
TCI : Rs. 87 Lakhs |
|
Cost of Project : 0 |
Solvent cement refers to any substance inorganic or organic synthetic that is capable of bonding other substances together by surface attachment. Pol...
|
Capacity : 500 Kg. / Day |
Plant and Machinery cost: 10 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 46.00 |
|
Break Even Point (BEP): 36.00 |
TCI : 104 Lakhs |
|
Cost of Project : 0 |
Fiber reinforced plastic board used for building panel board boat making and many other light constructive materials. It can be easily welded by plast...
|
Capacity : 10 Boats/Month |
Plant and Machinery cost: 27 Lakhs |
|
Working Capital : 239 Lakhs |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 35.00 |
TCI : - |
|
Cost of Project : 0 |
Rexine is also known in other words, as artificial leather cloth or coated fabrics, which is becoming increasingly popular all over the world. Presen...
|
Capacity : 4000 Sq. Meter / day |
Plant and Machinery cost: Rs. 31 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 42.00 |
TCI : Cost of Project Rs. 184 Lakhs |
|
Cost of Project : 0 |
Carbon Composite fibre is produced from the raw material used PAN, pitch etc. Quality of composite carbon fibre produced from PAN is much better than...
|
Capacity : 500 Kgs/day |
Plant and Machinery cost: 238 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 36.00 |
|
Break Even Point (BEP): 40.00 |
TCI : 520 Lakhs |
|
Cost of Project : 0 |
The reinforced plastic materials constitute a very large special section of the plastic industry. Most of the increased use of reinforced plastics an...
|
Capacity : 300 MT/Annum |
Plant and Machinery cost: Rs. 42 Lacs |
|
Working Capital : - |
Rate of Return (ROR): 34.00 |
|
Break Even Point (BEP): 55.00 |
TCI : Rs. 119 Lacs |
|
Cost of Project : 0 |
Injection moulding is one of the most important processes used in plastic goods manufacture both in terms of volume of thermoplastics handled and the...
|
Capacity : 30000 Nos./Annum Briefcase, 150 MT/Annum Plastic Containers, 300 MT/Annum Plastic Granules |
Plant and Machinery cost: 103 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 34.00 |
|
Break Even Point (BEP): 53.00 |
TCI : 344 Lakhs Cost of Project |
|
Cost of Project : 0 |
Thermocole or expanded polystyrene as the name suggests, is polystyrene expanded to more than two times the volume of polystyrene. Polystyrene foam is...
|
Capacity : 400 Kgs./Day |
Plant and Machinery cost: Rs. 61 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 42.00 |
TCI : Rs. 201 Lakhs |
|
Cost of Project : 0 |
PP BAGS FOR CEMENT PP/HDPE oriented sacks are becoming popular through out the world. This is because they are chemically inert & are water repellen...
|
Capacity : 120 Lakh Bags/Annum |
Plant and Machinery cost: 230 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 39.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project : 425 Lakhs |
|
Cost of Project : 42500000 |
Expanded polystyrene bead is a product of styrene polymer in presence of low volatile hydrocortisone in presence of blowing agent. Different shape of...
|
Capacity : 30,000 MT/Annum |
Plant and Machinery cost: 171 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 58.00 |
|
Break Even Point (BEP): 49.00 |
TCI : 794 Lakhs |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright . All rights reserved.
