We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
Plastics have become an important part of modern life and are used in different sectors of applications like packaging, building materials, consumer p...
|
Capacity : Bio-Plastic Glasses (wt. each Glass 16 gms): 62500 Pcs./Day Bio-Plastic Plates (wt. each Plate 40 gms): 25000 Pcs./Day Bio-Plastic Bags (wt. each Bag 100 gms): 10000 Pcs./Day |
Plant and Machinery cost: Rs 155 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 42.00 |
TCI : Cost of Project: Rs 718 lakhs |
|
Cost of Project : 71800000 |
An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations...
|
Capacity : PVC Wires and Cables: 10 KMTRS/Day |
Plant and Machinery cost: Rs 90 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Cost of Project: Rs 444 lakhs |
|
Cost of Project : 44400000 |
Plastics have become an indispensable part in today’s world. Due to their light weight, durability, energy efficiency, coupled with faster rate of pro...
|
Capacity : Pyrolysis Oil: 10 MT/Day Carbon (by product) :3 MT/Day Gas (by product) : 2 MT/Day |
Plant and Machinery cost: Rs 118 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 63.00 |
TCI : Cost of Project: Rs 446 lakhs |
|
Cost of Project : 44600000 |
The most widely used thermoplastic polyester is poly ethlene terephthalate (long-chain molecule consists of repeating units shown as figure right) or...
|
Capacity : 100,000Nos. /Day |
Plant and Machinery cost: Rs 101 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Cost of Project: Rs 290 lakhs |
|
Cost of Project : 29000000 |
uPVC pipes remain neutral to all transported fluids. uPVC is completely inert and is widely used for transporting liquids made for human consumption....
|
Capacity : 4,302Meters/Day |
Plant and Machinery cost: 189 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 58.00 |
TCI : Cost of Project: Rs 632 lakhs |
|
Cost of Project : 63200000 |
WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They are used in a variety of struc...
|
Capacity : 10,000,000Sq.Ft./Annum |
Plant and Machinery cost: 144 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 31.00 |
|
Break Even Point (BEP): 63.00 |
TCI : Cost of Project: Rs 558 lakhs |
|
Cost of Project : 55800000 |
The uPVC profile is basically an extruded section of a mixture of PVC with certain additives to make it suitable for making uPVC Windows and Doors. So...
|
Capacity : 8.3 MT/Day |
Plant and Machinery cost: 126 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project: Rs 654 lakhs |
|
Cost of Project : 65400000 |
A thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled "Paint Thinner" are usually mineral s...
|
Capacity : Thinner (1 Ltr. Bottle):3000 Bottles/day Gum Rosin (Beroja) (1 Kgs Container):4200 Bottles/day Phenyl Concentrate (0.50 Ltr Bottle):6000 Bottles/day Cement Solvent (0.50 Ltr Bottle) |
Plant and Machinery cost: 93 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 60.00 |
|
Break Even Point (BEP): 29.00 |
TCI : Cost of Project: Rs 523 lakhs |
|
Cost of Project : 52300000 |
A toy is an item that is used in play, especially one designed for such use. Playing with toys can be an enjoyable means of training young children fo...
|
Capacity : 1000 Nos. /Day |
Plant and Machinery cost: 115 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 31.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Cost of Project:549 lakhs |
|
Cost of Project : 54900000 |
Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. In the plastic woven...
|
Capacity : 8.4 MT/Day |
Plant and Machinery cost: 500 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project: Rs 923 lakhs |
|
Cost of Project : 92300000 |
WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They are used in a variety of struc...
|
Capacity : 4800 Kgs /Day |
Plant and Machinery cost: 146 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 56.00 |
TCI : Cost of Project: 391 lakhs |
|
Cost of Project : 39100000 |
These HDPE pipes and fittings have a high degree of corrosion resistance, are light in weight. Yet tough and durable, have excellent, hydraulic proper...
|
Capacity : 1,440,000 Kgs. /annum |
Plant and Machinery cost: 58 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project: Rs357 lakhs |
|
Cost of Project : 35700000 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright . All rights reserved.
