We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
Disposable Syringes made of plastic material have been successfully used in medical and pharmaceutical practice for many years. The constantly increas...
|
Capacity : •Disposable Plastic Syringes (2 ml Size):40000 Pcs/Day•Disposable Plastic Syringes (5 ml Size):40000 Pcs/Day |
Plant and Machinery cost: Rs 490 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 15.24 |
|
Break Even Point (BEP): 61.07 |
TCI : Cost of Project:Rs 757 Lakhs |
|
Cost of Project : 75700000 |
PVC compound insulated single core and multi core flexible cables have a wide range of application in machine tools, appliances, control panels, machi...
|
Capacity : 500 Coils/Day |
Plant and Machinery cost: Rs 63 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.14 |
|
Break Even Point (BEP): 57.75 |
TCI : Cost of Project:Rs 325 Lakhs |
|
Cost of Project : 32500000 |
PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : PVC Flex Banner (Frontlit/Backlit) 440 g/m2:20 MT/Day •PVC Flex Banner Vinyl 440 g/m2:5 MT/Day |
Plant and Machinery cost: Rs 550 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Cost of Project :Rs 1196 Lakhs |
|
Cost of Project : 119600000 |
PET, which stands for polyethylene terephthalate is a clear, strong and lightweight plastic belonging to the polyester family. It is typically called...
|
Capacity : PET Bottles/Jar 100 ml Size:16,000 Nos/Day •PET Bottles/Jar 200 ml Size:16,000 Nos/Day •PET Bottles/Jar 500 ml Size :16,000 Nos/Day •PET Bottles/Jar 1000 ml Size :16,000 Nos/Day •PET Bottles/Jar 2000 ml Size :16,000 Nos/Day |
Plant and Machinery cost: Rs 106 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 29.00 |
|
Break Even Point (BEP): 48.00 |
TCI : Cost of Project:Rs 546 Lakhs |
|
Cost of Project : 54600000 |
uPVC products are fire retardant. This is because they contain more than 70 % unplasticised uPVC which turns 57% Chlorine. This contribute efficiently...
|
Capacity : 8.3 MT/Day |
Plant and Machinery cost: Rs 161 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 41.00 |
TCI : Cost of Project:Rs 1119 Lakhs |
|
Cost of Project : 111900000 |
Wood plastic composites (WPCs) are roughly 50:50 mixtures of thermoplastic polymers and small wood particles. The wood and thermoplastics are usually...
|
Capacity : 4923 Sq. Ft/Day |
Plant and Machinery cost: Rs 173 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.67 |
|
Break Even Point (BEP): 54.70 |
TCI : Cost of Project:Rs 557 Lakhs |
|
Cost of Project : 55700000 |
PET-bottles more and more replace glass bottles in the beverage and food sector. The success of PET in comparison to glass is based on several economi...
|
Capacity : 24 Mt/Day |
Plant and Machinery cost: Rs 290 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.84 |
|
Break Even Point (BEP): 64.95 |
TCI : Cost of Project:Rs 737 Lakhs |
|
Cost of Project : 73700000 |
Shrink sleeve labels are sleeves constructed from film material that, rather than using adhesive, shrinks to a product’s surface when heat is applied....
|
Capacity : PVC Shrink Sleeves:400 Pkts/Day |
Plant and Machinery cost: Rs 72 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 13.16 |
|
Break Even Point (BEP): 66.91 |
TCI : Cost of Project:Rs 202 Lakhs |
|
Cost of Project : 20200000 |
A double wall pipe is the most common corrugated pipe design for drainage and sewage. Various different designs of pipes are available, such as single...
|
Capacity : 20 Mt/Day |
Plant and Machinery cost: Rs 808 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.25 |
|
Break Even Point (BEP): 51.34 |
TCI : Cost of Project:Rs 1510 Lakhs |
|
Cost of Project : 151000000 |
Plastic, today, is being increasingly utilized in almost every industry and activity. Its use has become indispensable due mainly to certain inherent...
|
Capacity : LDPE/LLDPE Pouch Films :1.2 MT/Day |
Plant and Machinery cost: Rs 30 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 24.32 |
|
Break Even Point (BEP): 41.09 |
TCI : Cost of Project:Rs 254 Lakhs |
|
Cost of Project : 25400000 |
The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from...
|
Capacity : Single Core Wires (THHN/THWN)465 KM/Day •Single Core Stranded (CU/PVC)350 KM/Day •Multiple-Core Flexible-Wire (Sheathed) 164 KM/Day |
Plant and Machinery cost: Rs 225 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Cost of Project: Rs 1034 Lakhs |
|
Cost of Project : 103400000 |
PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : •pPVC Flex Banner (Frontlit/Backlit) 340 gsm:15000 Sq.MT/Day •PVC Flex Banner Vinyl :3000 Sq.MT/Day |
Plant and Machinery cost: Rs 235 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 54.00 |
TCI : Cost of Project : Rs 455 Lakhs |
|
Cost of Project : 45500000 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright . All rights reserved.
