Best Business Opportunities in Meghalaya - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

 

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

• This report provides vital information on the product like its characteristics and segmentation

• This report helps you market and place the product correctly by identifying the target customer group of the product 

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

• The report provides a glimpse of government regulations applicable on the industry

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Ferro Alloys, Ferro Silicon, High Carbon Ferro Manganese, Silico Manganese Production Business
Ferro Alloys, Ferro Silicon, High Carbon Ferro Manganese, Silico Manganese Production Business

 

Ferroalloys are alloys consisting of a combina... Read More

Capacity : 0
Plant and Machinery cost: 15692.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):54.00 %
TCI :0.00 Lakhs
Cost of Project : 24627.00Lakhs
Add To Inquiry Basket
Start Your Own Business Of Auto Brake Pad And Brake Shoe
Start Your Own Business Of Auto Brake Pad And Brake Shoe

The greatest component of a car's braking system is the Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start production of E-Rickshaw and E-Loader
Start production of E-Rickshaw and E-Loader

An E-Rickshaw is an electric vehicle used as a public transportation. It is an economical, efficient and eco-friendly ... Read More

Capacity : E-Rickshaw: 6,000 Nos Per Annum, E-Loader: 3,000 Nos Per Annum
Plant and Machinery cost: 56.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 1170.00Lakhs
Add To Inquiry Basket
Disposable Plastic Syringes with Needles  Manufacturing Plant
Disposable Plastic Syringes with Needles Manufacturing Plant

Disposable plastic syringes with needles are a type of medical device used to inject fluids into or draw ... Read More

Capacity : -
Plant and Machinery cost: 2533.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):36.00 %
TCI :0.00 Lakhs
Cost of Project : 5405.00Lakhs
Add To Inquiry Basket
Growing Business of Mix Plaster, Block Jointer, Tile Adhesive and M 20 Concrete (Micro Concrete)
Growing Business of Mix Plaster, Block Jointer, Tile Adhesive and M 20 Concrete (Micro Concrete)

 

Important building supp... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start A Business And Change The World, So Now! Start Your Own Lucrative Business of Protein Based Nutrition Foods
Start A Business And Change The World, So Now! Start Your Own Lucrative Business of Protein Based Nutrition Foods

Foods with a high Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Here Are Some Great Tips on How to Get Started In the Ferro Alloys, Ferro Silicon High Carbon, Ferro Manganese, Silico Manganese Industry
Here Are Some Great Tips on How to Get Started In the Ferro Alloys, Ferro Silicon High Carbon, Ferro Manganese, Silico Manganese Industry

What Are Ferro Alloys, Ferro Silicon High Carbon, Fer... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start a Production  Of Carbon Black N990
Start a Production Of Carbon Black N990

Carbon Black N990 is a highly versatile and durable form of carbon black, which has been specially formulated ... Read More

Capacity : Carbon Black (N990): 8,000 MT Per Annum
Plant and Machinery cost: 4900.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):18.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 6200.00Lakhs
Add To Inquiry Basket
Setup plant of Glass Fiber Reinforced Polymer (GFRP) Rebar
Setup plant of Glass Fiber Reinforced Polymer (GFRP) Rebar

Glass fiber reinforced polymer (GFRP) rebar is a... Read More

Capacity : Glass Fibre Reinforced Polymer (GFRP) Bar (Size 8mm to 36 mm): 360,000 MT Per Annum
Plant and Machinery cost: 600.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):34.00%
Break Even Point (BEP):51.00 %
TCI :0.00 Lakhs
Cost of Project : 6100.00Lakhs
Add To Inquiry Basket
Emerging Business of Transformer Oil from Base Oil Opportunities in Petroleum Business
Emerging Business of Transformer Oil from Base Oil Opportunities in Petroleum Business

 ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Lucrative Business of Duplex Paper Board Business Opportunities in Paper Packaging Industry
Lucrative Business of Duplex Paper Board Business Opportunities in Paper Packaging Industry

Introduction:... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start Production Business of Washing Powder Detergent Powder Making Business
Start Production Business of Washing Powder Detergent Powder Making Business

Washing powder is a chemical compound that can be used to remove stubborn stains from... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Emerging Investment Opportunities in Business of Dextrose Saline, Intravenous Sugar Solution Pharmaceutical IV Fluids Industry
Emerging Investment Opportunities in Business of Dextrose Saline, Intravenous Sugar Solution Pharmaceutical IV Fluids Industry

Dextrose saline infusions are a single-dose bottle of clean, non-pyrogenic fluid and ... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
How to Start a 5 Star Hotel Business Business Opportunities in Setting up a Profitable Hospitality Industry
How to Start a 5 Star Hotel Business Business Opportunities in Setting up a Profitable Hospitality Industry

A 5-star hotel is designed to provide the best possible service to its guests. As a r... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Pressure Swing Adsorption Oxygen Plant
Pressure Swing Adsorption Oxygen Plant

PSA plants takes free air form atmosphere and con... Read More

Capacity : 90 to 100 cylinders per day
Plant and Machinery cost: 65.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
PSA Based Oxygen Plants
PSA Based Oxygen Plants

PSA plants take... Read More

Capacity : 240 to 270 cylinders per day
Plant and Machinery cost: 120.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Venturing in Business of Silicon Metal
Venturing in Business of Silicon Metal

 

Silicon is the fo... Read More

Capacity : 167 MT per Day
Plant and Machinery cost: 2138.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.47%
Break Even Point (BEP):60.26 %
TCI :0.00 Lakhs
Cost of Project : 6900.00Lakhs
Add To Inquiry Basket
Business of Medium Density Fiberboard (MDF)
Business of Medium Density Fiberboard (MDF)

 

Fiberboard is som... Read More

Capacity : 100 CBM per day
Plant and Machinery cost: 1769.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):22.92%
Break Even Point (BEP):48.83 %
TCI :0.00 Lakhs
Cost of Project : 2955.00Lakhs
Add To Inquiry Basket
Setting up Paracetamol Acetaminophen API Manufacturing Unit Rising Demand of Paracetamol Tablets in Covid-19 Pandemic
Setting up Paracetamol Acetaminophen API Manufacturing Unit Rising Demand of Paracetamol Tablets in Covid-19 Pandemic

Pain reliever and fever red... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Emerging Business of Small Volume Parenteral Solutions SVPs Start Investing in Most Growing Business of Pharmaceutical
Emerging Business of Small Volume Parenteral Solutions SVPs Start Investing in Most Growing Business of Pharmaceutical

SVPs (small-volume parenter... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing Unit of Medium Density Fiberboard MDF Investment Opportunities in Wood and Wood Based Products
Manufacturing Unit of Medium Density Fiberboard MDF Investment Opportunities in Wood and Wood Based Products

MDF, or Medium Density Fibr... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Profitable Business of IV Fluids (BFS Technology)
Profitable Business of IV Fluids (BFS Technology)

 

Intravenous fluids... Read More

Capacity : IV Fluids (500 ml Size Bottle) 100,000.0 Bottles per day
Plant and Machinery cost: 751.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.48%
Break Even Point (BEP):54.19 %
TCI :0.00 Lakhs
Cost of Project : 1277.00Lakhs
Add To Inquiry Basket
Set up an E-Waste Recycling Plant Waste Electrical & Electronic Equipment WEEE
Set up an E-Waste Recycling Plant Waste Electrical & Electronic Equipment WEEE

 

Electronic wastes,... Read More

Capacity : Plastic 1.60 MT per day Ferrous Material 1.00 MT per day Aluminium 0.70 MT per day Glass 1.00 MT per
Plant and Machinery cost: 86.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.47%
Break Even Point (BEP):60.15 %
TCI :0.00 Lakhs
Cost of Project : 314.00Lakhs
Add To Inquiry Basket
Production of Sugar  from Sugar Beet
Production of Sugar from Sugar Beet

 

Sugar is the gener... Read More

Capacity : Sugar from Sugar Beet 360.0 MT per day
Plant and Machinery cost: 3679.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.56%
Break Even Point (BEP):61.68 %
TCI :0.00 Lakhs
Cost of Project : 6910.00Lakhs
Add To Inquiry Basket
Start Profitable Industry of Lithium Ion Battery (Battery Assembly)
Start Profitable Industry of Lithium Ion Battery (Battery Assembly)

 

Lithium batteries ... Read More

Capacity : 48 Volt, 60 AH Lithium-Ion Battery Pack: 5.0 Nos per day 48 Volt, 80 AH Lithium-Ion Battery Pack:
Plant and Machinery cost: 72.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.95%
Break Even Point (BEP):70.65 %
TCI :0.00 Lakhs
Cost of Project : 293.00Lakhs
Add To Inquiry Basket
Production of Bromelain Enzyme  from Pineapple Stems
Production of Bromelain Enzyme from Pineapple Stems

 

Bromelain enzyme i... Read More

Capacity : Bromelain Enzyme 3.0 MT per day
Plant and Machinery cost: 92.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):33.25%
Break Even Point (BEP):82.73 %
TCI :0.00 Lakhs
Cost of Project : 285.00Lakhs
Add To Inquiry Basket
Steel Shipping Containers Cargo Container
Steel Shipping Containers Cargo Container

 

The cargo contain... Read More

Capacity : Cargo Containers (Size 20 Feet) 4.0 Nos Per Day Cargo Containers (Size 40 Feet) 4.0 Nos Per Day Carg
Plant and Machinery cost: 295.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.29%
Break Even Point (BEP):45.45 %
TCI :0.00 Lakhs
Cost of Project : 1364.00Lakhs
Add To Inquiry Basket
Business Ideas for Manufacturing of Silicone Sealants Acetic, Natural, MS and PU Types Profit Making Business for Entrepreneurs and Startups
Business Ideas for Manufacturing of Silicone Sealants Acetic, Natural, MS and PU Types Profit Making Business for Entrepreneurs and Startups

Silicone sealant, commonly known a... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business Opportunities in Production of Menthol Crystals Highly Profitable Business Industry
Business Opportunities in Production of Menthol Crystals Highly Profitable Business Industry

 

Menthol is an organic substance derived from t... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production Business of Sugar from Sugar Beet Rising Demand of Beet Sugar Business
Production Business of Sugar from Sugar Beet Rising Demand of Beet Sugar Business

 

Sugar is the simp... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Profitable Business of Bamboo Toothbrush
Profitable Business of Bamboo Toothbrush

 

Bamboo toothbrush... Read More

Capacity : Bamboo Toothbrush (4 Pcs. per Pack) 2,280 Packs per day Bamboo Toothbrush (1 Pc. per Pack) 9,120 Pac
Plant and Machinery cost: 123.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):57.00 %
TCI :28.00 Lakhs
Cost of Project : 395.00Lakhs
Add To Inquiry Basket
Production of Crumb Rubber Powder From Waste Tyres
Production of Crumb Rubber Powder From Waste Tyres

 

Crumb rubber is a... Read More

Capacity : Crumb Rubber Powder 24 MT per day By Product Steel Wire 4.8 MT per day
Plant and Machinery cost: 115.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):66.00 %
TCI :0.00 Lakhs
Cost of Project : 426.00Lakhs
Add To Inquiry Basket
Manufacturing of MS Fasteners (Screws, Nut and Bolts)
Manufacturing of MS Fasteners (Screws, Nut and Bolts)

 

Fastener may be d... Read More

Capacity : Zinc Coated High Tension Bolt (Size M5 to M20) 16 MT Per Day Zinc Coated High Tension Screw (Size M5
Plant and Machinery cost: 116.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 758.00Lakhs
Add To Inquiry Basket
Start a Production Business of Xanthan Gum (Food and Oil Drilling Grade)
Start a Production Business of Xanthan Gum (Food and Oil Drilling Grade)

 

Intro... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Emerging Business of IV Fluids (BFS Technology) Start Investing in Most Growing Business of Pharmaceutical
Emerging Business of IV Fluids (BFS Technology) Start Investing in Most Growing Business of Pharmaceutical

 

"Within a vein" is intravenous means. It usual... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Profitable Industry of  ADHESIVE (Fevicol Type - D2, D3, D4)
Profitable Industry of ADHESIVE (Fevicol Type - D2, D3, D4)

 

An adhesive is a ... Read More

Capacity : Fevicol Type Adhesive (D2, D3 & D4) 10 MT Per Day
Plant and Machinery cost: 78.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 247.00Lakhs
Add To Inquiry Basket
Emerging Production Business of  Tomato Ketchup & Mayonnaise
Emerging Production Business of Tomato Ketchup & Mayonnaise

Tomatoes are one of India's most significant food crops. It can be found in practical... Read More

Capacity : Tomato Ketchup (500 gms Size Glass Bottle) 4,000 Nos. per day Mayonnaise (500 gm Size Glass Bottle)
Plant and Machinery cost: 67.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 362.00Lakhs
Add To Inquiry Basket
Manufacturing of  Mineral Wool Ceiling Tiles
Manufacturing of Mineral Wool Ceiling Tiles

 

A secondary ceili... Read More

Capacity : Mineral Wool Ceiling Tiles 3,000.0 Sq. Mtr. Per Day
Plant and Machinery cost: 32.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 212.00Lakhs
Add To Inquiry Basket
Setup an Epoxy Resin (Liquid) Plant
Setup an Epoxy Resin (Liquid) Plant

 

Epoxy resin is a ... Read More

Capacity : Epoxy Resin (Liquid) 20,000 Kgs Per Day
Plant and Machinery cost: 689.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):80.00 %
TCI :0.00 Lakhs
Cost of Project : 1956.00Lakhs
Add To Inquiry Basket
Emerging Business of Chlorinated Paraffin Wax (CPW)
Emerging Business of Chlorinated Paraffin Wax (CPW)

 

The Chlorinated P... Read More

Capacity : Chlorinated Paraffin Wax (CPW) 40 MT per day Hydrochloric Acid (by product) 50 MT per day
Plant and Machinery cost: 641.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 1086.00Lakhs
Add To Inquiry Basket
Development of Sustainable Industrial Park
Development of Sustainable Industrial Park

An industrial park (also known as an industrial estate or a trading estate) is a desi... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start  Trading Business (Potato Powder, Onion Powder, Capsicum Powder, Ginger Powder and Curcumin Powder)
Start Trading Business (Potato Powder, Onion Powder, Capsicum Powder, Ginger Powder and Curcumin Powder)

 

The ... Read More

Capacity : Potato Powder 40 Kgs Per Day Capsicum Powder 40 Kgs Per Day Curcumin Powder 40 Kgs Per Day Ginger Po
Plant and Machinery cost: 1.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):77.00 %
TCI :0.00 Lakhs
Cost of Project : 27.00Lakhs
Add To Inquiry Basket
Start Manufacturing of  uPVC Profiles for Doors and Windows
Start Manufacturing of uPVC Profiles for Doors and Windows

Unplasticized Polyvinyl Chloride (uPVC) is a unique substance that meets all of the st... Read More

Capacity : uPVC Profiles 2,000 Kgs Per Day Wood Laminated uPVC Profiles 1,570 Kgs Per Day
Plant and Machinery cost: 104.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):75.00 %
TCI :0.00 Lakhs
Cost of Project : 241.00Lakhs
Add To Inquiry Basket
Rising Business of  IV Fluid (FFS Technology)
Rising Business of IV Fluid (FFS Technology)

 

... Read More

Capacity : IV Fluids (500 ml Size) 180,000 Bags per day IV Fluids (1000 ml Size) 240,000 Bags per day
Plant and Machinery cost: 10492.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):37.00 %
TCI :0.00 Lakhs
Cost of Project : 13361.00Lakhs
Add To Inquiry Basket
Ethanol from Grains
Ethanol from Grains

 

Ethanol Read More

Capacity : 10KL/Day
Plant and Machinery cost: 1500.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of  Liquid Hand Soap, Foam  and Bath Soap
Manufacturing of Liquid Hand Soap, Foam and Bath Soap

 

A soap is a salt ... Read More

Capacity : Bath Soap (1 Kgs Pack 10 Pcs. Each 100 gms Size) 1,000 Kgs Per Day Liquid Hand Soap (Pack 1 Ltr. Pla
Plant and Machinery cost: 49.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):57.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 261.00Lakhs
Add To Inquiry Basket
Start Assembling of Lithium Ion Battery (Battery Assembly)
Start Assembling of Lithium Ion Battery (Battery Assembly)

 

A lithium-ion bat... Read More

Capacity : 48 Volt, 60 AH Lithium-Ion Battery Pack 10 Nos per day 48 Volt, 80 AH Lithium-Ion Battery Pack 10 No
Plant and Machinery cost: 165.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 538.00Lakhs
Add To Inquiry Basket
Production of Printed Circuit Board (PCB) Multilayer
Production of Printed Circuit Board (PCB) Multilayer

 

The PCB, or Print... Read More

Capacity : Standard Printed Circuit Board (FR4, HDI, High-TG, Thick Copper and Halogen-free) 60Sq.Mt. Per Day
Plant and Machinery cost: 1258.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 1894.00Lakhs
Add To Inquiry Basket
Residential Apartments
Residential Apartments

 

Residential Apart... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):8.94%
Break Even Point (BEP):0.89 %
TCI :0.00 Lakhs
Cost of Project : 13771.00Lakhs
Add To Inquiry Basket
Production of IV Infusion Set (IV Set)
Production of IV Infusion Set (IV Set)

Intravenous therapy delivers liquid substances on to the veins. Intravenous route is that the fast... Read More

Capacity : I.V. Set: 140,000 Sets / Day
Plant and Machinery cost: 904.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 1430.00Lakhs
Add To Inquiry Basket
Steel Billets and TMT Steel Bars (Rebar) Production from Scrap Metal
Steel Billets and TMT Steel Bars (Rebar) Production from Scrap Metal

Most of the steel generally in civil and allied work used is that the plain ... Read More

Capacity : Steel Billets (Size 100mm x 100mm to 180mm x 180 mm Sections of Max. 6 meter length): 333.3 MT / Da
Plant and Machinery cost: 8427.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):47.00 %
TCI :0.00 Lakhs
Cost of Project : 16747.00Lakhs
Add To Inquiry Basket
Edible Oil Refinery using Crude Palm Oil
Edible Oil Refinery using Crude Palm Oil

Palm Nuts are an irresistible, nutritious and sweet tasting natural food. they pr... Read More

Capacity : Edible Refined Oil from Crude Palm Oil : 200 MT / Day
Plant and Machinery cost: 2709.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 8322.00Lakhs
Add To Inquiry Basket
Manufacturing of NPK Fertilizer & Calcium Ammonium Nitrate (CAN)
Manufacturing of NPK Fertilizer & Calcium Ammonium Nitrate (CAN)

 

Manufactu... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Micronutrients Fertilizer Manufacturing
Investment Opportunities in Micronutrients Fertilizer Manufacturing

 

Micronutrient effi... Read More

Capacity : Micronutrient Fertilizer for Fruits: 1,250 Kgs/Day Micronutrient Fertilizer for Vegetables: 750 Kgs/
Plant and Machinery cost: 58.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 345.00Lakhs
Add To Inquiry Basket
Toughened Glass Manufacturing Business Plan
Toughened Glass Manufacturing Business Plan

 

The toughened glass is depicted as a sort of glass which has been precisely ... Read More

Capacity : 4,000 Sq. Ft/day
Plant and Machinery cost: 331.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 758.00Lakhs
Add To Inquiry Basket
Business Plan of Glucose Saline Manufacturing
Business Plan of Glucose Saline Manufacturing

 

Glucose, also known as dextrose, is a natural sugar that is chemically similar to glucose. If given in ad... Read More

Capacity : 200000 Bottles/ day
Plant and Machinery cost: 2170.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):37.00 %
TCI :0.00 Lakhs
Cost of Project : 4083.00Lakhs
Add To Inquiry Basket
Set Up a Lithium Ion (Lifepo4) Cell Manufacturing Plant
Set Up a Lithium Ion (Lifepo4) Cell Manufacturing Plant

Introduction

Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Processing and Manufacturing of Magnesium Powder from Dolomite Stone
Processing and Manufacturing of Magnesium Powder from Dolomite Stone

 

INTRODUCTI... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Fiberglass Wool Ceiling Tiles
Investment Opportunities in Fiberglass Wool Ceiling Tiles

A secondary ceiling, hung below the primary (structural) ceili... Read More

Capacity : 3000 Sq. Mtr. per Day
Plant and Machinery cost: 32.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 213.00Lakhs
Add To Inquiry Basket
Manufacturing of Ply Board from Poplar & Eucalyptus Wooden Logs
Manufacturing of Ply Board from Poplar & Eucalyptus Wooden Logs

 

Ply Board is a typ... Read More

Capacity : Poplar Ply Board Size: 8' x 4' Thickness: 18mm:250.0 Nos. Per Day Eucalyptus Ply Board Size: 8' x 4'
Plant and Machinery cost: 260.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):63.00 %
TCI :0.00 Lakhs
Cost of Project : 536.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Stainless Steel Utensils 0 0.00 0.00
Calcium Carbonate Product... 0 0.00 0.00
Orange Juice Manufacturin... 0 0.00 0.00
Wood Pulp Manufacturing B... 0 0.00 0.00
Natural Glycerin Manufact... 0 0.00 0.00
Heat Exchanger (Fin Type)... 0 0.00 0.00
Steel Drums and Barrels 0 0.00 0.00
Automatic Ignition Coil 0 0.00 0.00
Chalk Crayon Industry 0 0.00 0.00
PVC Lining For Metal Crow... 0 0.00 0.00
Non-Formaldehyde Dye Fixi... 0 0.00 0.00
Washing Machine 0 0.00 0.00
Phosphoric Acid (Purifica... 0 0.00 0.00
Hydrochloric Acid 0 0.00 0.00
Acyclovir 0 0.00 0.00
Ampicillin 0 0.00 0.00
Ductile Iron Pipe Fitting... 0 0.00 0.00
Medical Transcription Cen... 0 0.00 0.00
Self-Tapping Steel Screws 0 0.00 0.00
PVC Extrusion Profile (Wi... 0 0.00 0.00
Drinking Glasses - Juice ... 0 0.00 0.00
Baby & Adult Diaper and S... Baby Diapers (4 Pcs.) : 84000 Pkts. /day Adult Diapers (4 Pcs.) : 18000 Pkts. /day Sanitary Pads (8 32.00 4597.00
Aerosol Cans Production f... 0 0.00 0.00
Bicycle Tyre & Tubes Prod... 0 0.00 0.00
Biomedical Waste Recyclin... 0 0.00 0.00
Chocos (Ready-to-Eat Brea... 0 0.00 0.00
Stain Removers 0 0.00 0.00
Chocolate Drink (Liquid F... 0 0.00 0.00
Dimethyl Sulphate 0 0.00 0.00
Ramming Mass and Fire Bri... 0 0.00 0.00
12345678910...

Showing 301 - 360 of 2682 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

 

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report,  Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

 


And before diversifying/venturing into any product, wish to study the following aspects of the identified product:


• Good Present/Future Demand
• Export-Import Market Potential
• Raw Material & Manpower Availability
• Project Costs and Payback Period


We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

 

The report contains all the data which will help an entrepreneur find answers to questions like:

• Why I should invest in this project?
• What will drive the growth of the product?
• What are the costs involved?
• What will be the market potential?


The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product.

The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.


Reasons for buying the report:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.

• This report provides vital information on the product like its definition, characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

 

Our Approach:


• Our research reports broadly cover Indian markets, present analysis, outlook and forecast.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players. 

• We use reliable sources of information and databases.  And information from such sources is processed by us and included in the report.

 

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

 

 

Ø  Introduction

·         Project Introduction

·         Project Objective and Strategy

·         Concise History of the Product

·         Properties

·         BIS (Bureau of Indian Standards) Provision & Specification

·         Uses & Applications

 

Ø  Market Study and Assessment

·         Current Indian Market Scenario

·         Present Market Demand and Supply

·         Estimated Future Market Demand and Forecast

·         Statistics of Import & Export

·         Names & Addresses of Existing Units (Present Players)

·         Market Opportunity

 

Ø  Raw Material

·         List of Raw Materials

·         Properties of Raw Materials

·         Prescribed Quality of Raw Materials

·         List of Suppliers and Manufacturers

 

Ø  Personnel (Manpower) Requirements

·         Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

 

Ø  Plant and Machinery

·         List of Plant & Machinery

·         Miscellaneous Items

·         Appliances & Equipments

·         Laboratory Equipments & Accessories

·         Electrification

·         Electric Load & Water

·         Maintenance Cost

·         Sources of Plant & Machinery (Suppliers and Manufacturers)

 

Ø  Manufacturing Process and Formulations

·         Detailed Process of Manufacture with Formulation

·         Packaging Required

·         Process Flow Sheet Diagram

 

Ø  Infrastructure and Utilities

·         Project Location

·         Requirement of Land Area

·         Rates of the Land

·         Built Up Area

·         Construction Schedule

·         Plant Layout and Requirement of Utilities

 

Project at a Glance

Along with financial details as under:

 

  •     Assumptions for Profitability workings

  •    Plant Economics

  •    Production Schedule

  •    Land & Building

            Factory Land & Building

            Site Development Expenses

  •    Plant & Machinery

             Indigenous Machineries

            Other Machineries (Miscellaneous, Laboratory etc.)

  •    Other Fixed Assets

            Furniture & Fixtures

            Pre-operative and Preliminary Expenses

            Technical Knowhow

            Provision of Contingencies

  •   Working Capital Requirement Per Month

             Raw Material

            Packing Material

            Lab & ETP Chemical Cost

           Consumable Store

  •   Overheads Required Per Month And Per Annum

         Utilities & Overheads (Power, Water and Fuel Expenses etc.)

             Royalty and Other Charges

            Selling and Distribution Expenses

  •    Salary and Wages

  •    Turnover Per Annum

  •   Share Capital

            Equity Capital

            Preference Share Capital

 

  •    Annexure 1:: Cost of Project and Means of Finance

  •    Annexure 2::  Profitability and Net Cash Accruals

                Revenue/Income/Realisation

                Expenses/Cost of Products/Services/Items

                Gross Profit

                Financial Charges     

                Total Cost of Sales

                Net Profit After Taxes

                Net Cash Accruals

  •   Annexure 3 :: Assessment of Working Capital requirements

                Current Assets

                Gross Working. Capital

                Current Liabilities

                Net Working Capital

                Working Note for Calculation of Work-in-process

  •    Annexure 4 :: Sources and Disposition of Funds

  •    Annexure 5 :: Projected Balance Sheets

                ROI (Average of Fixed Assets)

                RONW (Average of Share Capital)

                ROI (Average of Total Assets)

  •    Annexure 6 :: Profitability ratios

                D.S.C.R

                Earnings Per Share (EPS)

               

             Debt Equity Ratio

        Annexure 7   :: Break-Even Analysis

                Variable Cost & Expenses

                Semi-Var./Semi-Fixed Exp.

                Profit Volume Ratio (PVR)

                Fixed Expenses / Cost 

                B.E.P

  •   Annexure 8 to 11:: Sensitivity Analysis-Price/Volume

            Resultant N.P.B.T

            Resultant D.S.C.R

   Resultant PV Ratio

   Resultant DER

  Resultant ROI

          Resultant BEP

  •    Annexure 12 :: Shareholding Pattern and Stake Status

        Equity Capital

        Preference Share Capital

  •   Annexure 13 :: Quantitative Details-Output/Sales/Stocks

        Determined Capacity P.A of Products/Services

        Achievable Efficiency/Yield % of Products/Services/Items 

        Net Usable Load/Capacity of Products/Services/Items   

       Expected Sales/ Revenue/ Income of Products/ Services/ Items   

  •    Annexure 14 :: Product wise domestic Sales Realisation

  •    Annexure 15 :: Total Raw Material Cost

  •    Annexure 16 :: Raw Material Cost per unit

  •    Annexure 17 :: Total Lab & ETP Chemical Cost

  •    Annexure 18  :: Consumables, Store etc.,

  •    Annexure 19  :: Packing Material Cost

  •    Annexure 20  :: Packing Material Cost Per Unit

  •    Annexure 21 :: Employees Expenses

  •    Annexure 22 :: Fuel Expenses

  •    Annexure 23 :: Power/Electricity Expenses

  •    Annexure 24 :: Royalty & Other Charges

  •    Annexure 25 :: Repairs & Maintenance Exp.

  •    Annexure 26 :: Other Mfg. Expenses

  •    Annexure 27 :: Administration Expenses

  •    Annexure 28 :: Selling Expenses

  •    Annexure 29 :: Depreciation Charges – as per Books (Total)

  •   Annexure 30   :: Depreciation Charges – as per Books (P & M)

  •   Annexure 31   :: Depreciation Charges - As per IT Act WDV (Total)

  •   Annexure 32   :: Depreciation Charges - As per IT Act WDV (P & M)

  •   Annexure 33   :: Interest and Repayment - Term Loans

  •   Annexure 34   :: Tax on Profits

  •   Annexure 35   ::Projected Pay-Back Period And IRR