Best Business Opportunities in Mizoram - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

 

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

• This report provides vital information on the product like its characteristics and segmentation

• This report helps you market and place the product correctly by identifying the target customer group of the product 

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

• The report provides a glimpse of government regulations applicable on the industry

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report


We can provide you detailed project reports on the following topics. Please select the projects of your interests.
Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.
We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.


We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Add multiple items to inquiry

Select the items and then press Add to inquiry button

Sort by :
Setting up a Multispeciality Hospital (200 Bedded)
Setting up a Multispeciality Hospital (200 Bedded)

A hospital is a health care institution providing patient treatment with specialized m... Read More

Capacity : 200 Bedded Hospital
Plant and Machinery cost: 14000.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 21248.00Lakhs
Add To Inquiry Basket
Start Manufacturing of Aluminium Ingots from Aluminium Scrap
Start Manufacturing of Aluminium Ingots from Aluminium Scrap

Aluminum, is a light weight,... Read More

Capacity : Aluminium Alloy Ingots14 MT per day Aluminium Scrap 0.23 MT per day
Plant and Machinery cost: 700.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 3315.00Lakhs
Add To Inquiry Basket
Calcium Sennosides from Senna Leaves Production Business Plan
Calcium Sennosides from Senna Leaves Production Business Plan

Calcium Sennoside are the m... Read More

Capacity : 400 Kgs per Day
Plant and Machinery cost: 291.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 607.00Lakhs
Add To Inquiry Basket
30 Bedded Hospital Business Plan
30 Bedded Hospital Business Plan

A hospital is supposed to treat patients suffering from various ailments. Doctors with their dedicated spirit serve the nation at large by providin... Read More

Capacity : Special Ward Patients : 2 Patients / Day General Ward Patients: 16 Patients / Day Double Bedded Pati
Plant and Machinery cost: 347.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):20.00%
Break Even Point (BEP):55.00 %
TCI :0.00 Lakhs
Cost of Project : 604.00Lakhs
Add To Inquiry Basket
Construction Opportunities in Geotextiles for Roadways
Construction Opportunities in Geotextiles for Roadways

Geotextiles were used in roadway construction to stabilize roadways and their edges. These early geotextiles were made from natural fibres, fabrics... Read More

Capacity : Geotextiles for Road & Construction: 2,934 Kgs / Day
Plant and Machinery cost: 326.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):57.00 %
TCI :0.00 Lakhs
Cost of Project : 665.00Lakhs
Add To Inquiry Basket
Disposable Nitrile Examination Gloves - Medical Grade, Powder Free, Disposable, Non Sterile, Food Safe, Textured
Disposable Nitrile Examination Gloves - Medical Grade, Powder Free, Disposable, Non Sterile, Food Safe, Textured

Nitrile gloves are a kind of disposable gloves made up of rubber, this suggests there's no risk of latex allergies. Th... Read More

Capacity : Disposable Nitrile Gloves (Powder Free): 500,000 Pcs. / Day
Plant and Machinery cost: 1321.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):45.00 %
TCI :0.00 Lakhs
Cost of Project : 2890.00Lakhs
Add To Inquiry Basket
Active Pharma Ingredients (API) Manufacturing (Azithromycin, Cefixime, Telmisartan, Diclofenac sodium, Aceclofenac)
Active Pharma Ingredients (API) Manufacturing (Azithromycin, Cefixime, Telmisartan, Diclofenac sodium, Aceclofenac)

Active pharmaceutical ingredients are the active substances that are utilized in the manufacture of a drug and have a ... Read More

Capacity : Azithromycin: 500 Kgs / Day Cefixime: 500 Kgs / Day Telmisartan: 50 Kgs / Day Diclofenac Sodium: 500
Plant and Machinery cost: 155.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 729.00Lakhs
Add To Inquiry Basket
Castor Oil from Castor Seeds Manufacturing Business
Castor Oil from Castor Seeds Manufacturing Business

The castor oil plant, Ricin us common is, may be a species of flowering plant within the spurge family, Euphorbiaceous... Read More

Capacity : Castor Oil: 5 MT / Day Castor De-Oiled Cake: 7.2 MT / Day
Plant and Machinery cost: 106.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):64.00 %
TCI :0.00 Lakhs
Cost of Project : 374.00Lakhs
Add To Inquiry Basket
Surgical & N95 Mask Manufacturing Business Plan
Surgical & N95 Mask Manufacturing Business Plan

A surgical mask, also referred to as a procedure mask, medical mask or just as a face mask, is meant to be worn by health professionals during surg... Read More

Capacity : Surgical Face Masks (each Pkts = 25 Pcs.): 576 Pkts / Day N95 Face Masks (each Pkts = 5 Pcs.): 2,880
Plant and Machinery cost: 359.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):40.00 %
TCI :0.00 Lakhs
Cost of Project : 717.00Lakhs
Add To Inquiry Basket
Earthmover JCB Bucket Pin Manufacturing and JCB Tooth Nuts, Bolt and Pin Bush
Earthmover JCB Bucket Pin Manufacturing and JCB Tooth Nuts, Bolt and Pin Bush

JCB range of Excavators is the best-in-class, which includes a wide array of large, mid & mini Excavators in the r... Read More

Capacity : JCB Bucket Pin 42 mm Diameter : 1,666.7 Kgs / Day JCB Bucket Pin Bush : 1,666.7 Kgs / Day JCB Bucke
Plant and Machinery cost: 147.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 418.00Lakhs
Add To Inquiry Basket
Urea Fertilizer- Start Business in Fertilizer Industry
Urea Fertilizer- Start Business in Fertilizer Industry

Fertilizers provide three primary nutrients: Nitrogen (N), Phosphorus (P) and Potassium (K). Nitrogen supports vegetat... Read More

Capacity : Urea Fertilizer: 972.2 MT / Day
Plant and Machinery cost: 4320.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):56.00 %
TCI :0.00 Lakhs
Cost of Project : 15110.00Lakhs
Add To Inquiry Basket
Pan Masala Sada, Meetha & Zarda Manufacturing Business Plan
Pan Masala Sada, Meetha & Zarda Manufacturing Business Plan

Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other... Read More

Capacity : Sada Pan Masala (10 gms Size each Pouch) : 165 Kgs / Day Meetha Pan Masala (4 gms Size each Pouch):
Plant and Machinery cost: 21.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):72.00 %
TCI :0.00 Lakhs
Cost of Project : 64.00Lakhs
Add To Inquiry Basket
Business Plan for Rewinding of Burnt Electric Motors
Business Plan for Rewinding of Burnt Electric Motors

Electric motors are relatively simple mechanical devices, given the sheer number of various motors and winding pattern... Read More

Capacity : Rewinding Brunt Electric Motors: 10 Nos./ Day
Plant and Machinery cost: 885.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 1320.00Lakhs
Add To Inquiry Basket
Plastic Waste Recycling Plant – Business Plan
Plastic Waste Recycling Plant – Business Plan

 

Waste is now a global problem, and one that must be addressed in order to so... Read More

Capacity : Recycled PP Granules : 578 Kgs / Day Recycled LDPE Granules: 720 Kgs / Day Recycled HDPE Granules: 7
Plant and Machinery cost: 144.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):68.00 %
TCI :0.00 Lakhs
Cost of Project : 380.00Lakhs
Add To Inquiry Basket
Start a Toothpaste Manufacturing Business
Start a Toothpaste Manufacturing Business

Toothpaste may be a paste or gel to be used with a toothbrush to maintain and improve oral health ... Read More

Capacity : White Toothpaste 50 gms Size: 96,000 Tubes / Day White Toothpaste 240 gms Size: 16,800 Tubes / Day S
Plant and Machinery cost: 308.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):36.00%
Break Even Point (BEP):34.00 %
TCI :0.00 Lakhs
Cost of Project : 6936.00Lakhs
Add To Inquiry Basket
Composite Materials-Carbon Fibre Composites & Glass Fibre Composites
Composite Materials-Carbon Fibre Composites & Glass Fibre Composites

A material is composed of a minimum of two materials, which combine to offer proper... Read More

Capacity : Carbon Fibre Composite Laminate M2 width 1500 mm : 833.3 Sq. Mt. / Day Glass Fibre Composite Laminat
Plant and Machinery cost: 115.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):67.00 %
TCI :0.00 Lakhs
Cost of Project : 452.00Lakhs
Add To Inquiry Basket
Manufacturing Business Plans
Manufacturing Business Plans

Manufacturing Business Plans of HDPE and PP Bags, Disposable... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Business Plans for Production
Business Plans for Production

Business Plans for Production of Disposable Nitrile Examinat... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Cellulose (Cellulosic) Fibers
Production of Cellulose (Cellulosic) Fibers

Production of Cellulose (Cellulosic) Fibers. Growing Industry to Start a Busine... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Investment Opportunities in DCDA (Dicyandiamide)
Investment Opportunities in DCDA (Dicyandiamide)

Dicyandiamide is a strongly alkaline and water-soluble white crystalline compound with the scientific name of cyan guanidine. The chemical is the d... Read More

Capacity : Dicyandiamide (DCDA): 10 MT / Day
Plant and Machinery cost: 50.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 373.00Lakhs
Add To Inquiry Basket
How to Start Disposable Plastic Syringes (General Medical Devices) Manufacturing Business
How to Start Disposable Plastic Syringes (General Medical Devices) Manufacturing Business

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in steriliz... Read More

Capacity : Disposable Plastic Syringes 2 ml Size: 2,000 Boxes/ Day (Each Box = 100 Pcs.) Disposable Plastic Syr
Plant and Machinery cost: 1100.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):15.00%
Break Even Point (BEP):47.00 %
TCI :0.00 Lakhs
Cost of Project : 2006.00Lakhs
Add To Inquiry Basket
Manufacturing of Humic Acid
Manufacturing of Humic Acid

 

Humic acid is a principal component of Humic subst... Read More

Capacity : Humic Acid: 20 MT / Day
Plant and Machinery cost: 169.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):50.00 %
TCI :0.00 Lakhs
Cost of Project : 726.00Lakhs
Add To Inquiry Basket
Disposable Plastic Syringes with Needles Manufacturing Business
Disposable Plastic Syringes with Needles Manufacturing Business

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to t... Read More

Capacity : Disposable Plastic Syringes with Needle 1 ml Size) : 18,000 Nos / Day Disposable Plastic Syringes
Plant and Machinery cost: 108.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):31.00%
Break Even Point (BEP):44.00 %
TCI :0.00 Lakhs
Cost of Project : 498.00Lakhs
Add To Inquiry Basket
Synthetic Camphor (Kapoor-Kapur) Powder Business Plan
Synthetic Camphor (Kapoor-Kapur) Powder Business Plan

Camphor is a waxy, flammable, white or transparent solid with a strong aroma. It is a torpedoed with the chemical form... Read More

Capacity : Synthetic Camphor Powder : 8 MT / Day
Plant and Machinery cost: 315.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):52.00 %
TCI :0.00 Lakhs
Cost of Project : 1152.00Lakhs
Add To Inquiry Basket
Manufacturing Business Plan-Dehydrated Onion
Manufacturing Business Plan-Dehydrated Onion

Onion is one of the most important commercial vegetable crops grown in India. Both immature and mature bulbs are used ... Read More

Capacity : Dehydrated Onion Sliced/Chopped: 50 MT / Day Cattle Feed as By Product: 35 MT / Day
Plant and Machinery cost: 2976.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):43.00 %
TCI :0.00 Lakhs
Cost of Project : 5116.00Lakhs
Add To Inquiry Basket
Production of Biodegradable Tableware from Corn Starch
Production of Biodegradable Tableware from Corn Starch

Production of Biodegradable Tableware from Corn Star... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Rice Husk Based Biodegradable Cutlery
Production of Rice Husk Based Biodegradable Cutlery

Production of Rice Husk Based Biodegradable Cutlery. Highly... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil)
Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil)

Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil). Awesome Startup... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Biodegradable Plastic Bags from Corn Starch
Biodegradable Plastic Bags from Corn Starch

Corn starch has 25% amylose and 75% amylopectin. The amylose molecules loose lose water increase biodegradation charac... Read More

Capacity : Biodegradable Plastic Bags (Per Bag 25 gms Size): 12 MT per day
Plant and Machinery cost: 1053.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 1498.00Lakhs
Add To Inquiry Basket
Manufacturing of Dextrose Anhydrous, Sorbitol & Vitamin C. Investment Opportunities in Pharma Sector.
Manufacturing of Dextrose Anhydrous, Sorbitol & Vitamin C. Investment Opportunities in Pharma Sector.

Manufacturing of Dextrose Anhydrous, Sorbitol & Vitamin C. Investment Opportunities in Pharma Sector. Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
White Oats Processing
White Oats Processing

White Oats Processing. Profitable Business Opportunities in Oat Based Products. Oatme... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Vermicompost and Organic Manure
Manufacturing of Vermicompost and Organic Manure

Manufacturing of Vermicompost and Organic Manure. Profitable Investment in Organic Natural Plant Nutrient Indust... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Biomass Briquettes from Biowaste.
Manufacturing of Biomass Briquettes from Biowaste.

Manufacturing of Biomass Briquettes from Biowaste. Profitable Investment in Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Black Pepper Essential Oil
Manufacturing of Black Pepper Essential Oil

Manufacturing of Black Pepper Essential Oil. Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
3 Star Hotel with 2 Banquet Hall & Restaurant
3 Star Hotel with 2 Banquet Hall & Restaurant

A hotel is an establishment that provides Read More

Capacity : Air conditioned Deluxe Rooms:32 Units per day Conference Hall, Meeting Rooms & Business Lounge:0.5
Plant and Machinery cost: 150.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):25.00%
Break Even Point (BEP):30.00 %
TCI :0.00 Lakhs
Cost of Project : 1014.00Lakhs
Add To Inquiry Basket
Workshop for Motors of Low Voltage (Up-To 1000V) and Distribution Transformers (Maintenance, overhauls and repairs)
Workshop for Motors of Low Voltage (Up-To 1000V) and Distribution Transformers (Maintenance, overhauls and repairs)

Maintenance of electrical equipment and the maintenance function in general, are key subjects ... Read More

Capacity : Repair & Maintenance Motors (100 KW):2 Units per day On Site Annual Maintenance Contract (AMC):0.8 U
Plant and Machinery cost: 22.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):72.00 %
TCI :0.00 Lakhs
Cost of Project : 76.00Lakhs
Add To Inquiry Basket
PVC Wires and Cables
PVC Wires and Cables

An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electr... Read More

Capacity : PVC Coated Copper Wires (100 Mtrs Rolls):33,784 Nos. per annum PVC Coated Aluminium Wires (100 Mtrs
Plant and Machinery cost: 195.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):32.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 1568.00Lakhs
Add To Inquiry Basket
Start your own industry of Synthetic camphor Production.
Start your own industry of Synthetic camphor Production.

Start your own industry of Synthetic camphor Production. Profit-Making Project for En... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Start Profitable Surgical Face Mask Industry.
Start Profitable Surgical Face Mask Industry.

Start Profitable Surgical Face Mask Industry. Money Making Business Ideas in production of Me... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of  Disposable Personal Protective Equipment (PPE) Kit
Manufacturing of Disposable Personal Protective Equipment (PPE) Kit


The purpo... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Ayurvedic Herbal Hand Sanitizer
Ayurvedic Herbal Hand Sanitizer
Hand hygiene is the best tool in preventing opportunistic infections caused by different micro organisms and to achieve this, the use of hand sanitize... Read More
Capacity : 1
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Liquid Hand Wash
Liquid Hand Wash
Hands are primary mode of transmission of microbes and infections. Hand-washing is critical in food production, food service and also important in ... Read More
Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of Sodium Chlorite Liquid from Powder (31 Percent Liquid NaClO2)
Manufacturing of Sodium Chlorite Liquid from Powder (31 Percent Liquid NaClO2)

Sodium chlorite (NaClO2) is a chemical compound used in the manufacturing of paper and as a disinfect... Read More

Capacity : Sodium Chlorite Liquid: 1.7 MT / Day
Plant and Machinery cost: 7.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):61.00 %
TCI :0.00 Lakhs
Cost of Project : 120.00Lakhs
Add To Inquiry Basket
Manufacturing of Banana Wafers (Deep Fried Snack Food)
Manufacturing of Banana Wafers (Deep Fried Snack Food)

Fried banana wafers are a deep fried snack food prepared from green fresh mature bananas of the cookin... Read More

Capacity : Banana Wafers (40 gms size): 10,700 Packets / Day Banana Wafers (20 gms size): 21,300 Packets / Day
Plant and Machinery cost: 37.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):53.00 %
TCI :0.00 Lakhs
Cost of Project : 393.00Lakhs
Add To Inquiry Basket
Fruit Wine (Alcoholic Beverage) Manufacturing Plant
Fruit Wine (Alcoholic Beverage) Manufacturing Plant

Fruit wines are fermented alcoholic beverages made up of a variety of base ingredients (other tha... Read More

Capacity : Fruit Wine (750 ml size Bollte): 2,666.7 Bottles / Day
Plant and Machinery cost: 150.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):41.00 %
TCI :0.00 Lakhs
Cost of Project : 873.00Lakhs
Add To Inquiry Basket
Production of Needles for Sewing and Embroidery Machine
Production of Needles for Sewing and Embroidery Machine

A sewing needle, used for hand-sewing, may be a long slender tool with a pointed tip at one end and a hole (... Read More

Capacity : Sewing Needles (30 g each) per Pack 50 Pcs.: 6,400 Packs / Day Embroidery Needles (30 g each) per P
Plant and Machinery cost: 256.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 939.00Lakhs
Add To Inquiry Basket
Manufacturing of Pasta and Macaroni
Manufacturing of Pasta and Macaroni

Pasta may be a food that's loved by people of all age bracket. It not just ea... Read More

Capacity : Pasta (1 Kg Pack): 13,000 Packs / Day Macaroni (1 Kg Pack) : 13,000 Packs / Day
Plant and Machinery cost: 863.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):12.00%
Break Even Point (BEP):65.00 %
TCI :0.00 Lakhs
Cost of Project : 1300.00Lakhs
Add To Inquiry Basket
Aluminium Ingots (Aluminium Alloy Ingots) from Aluminium Scrap Manufacturing
Aluminium Ingots (Aluminium Alloy Ingots) from Aluminium Scrap Manufacturing

Ingots are very large casting products, greater in size and shape than blooms, billets and sla... Read More

Capacity : Aluminium Alloy Ingots: 24 MT / Day Aluminium Scrap : 0.40 MT / Day
Plant and Machinery cost: 186.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 703.00Lakhs
Add To Inquiry Basket
31 Best Industry Business Plans for Starting a Small Scale Business with Investment of 25 Lakhs (Plant and Machinery)
31 Best Industry Business Plans for Starting a Small Scale Business with Investment of 25 Lakhs (Plant and Machinery)

31 Best Industry Business Plans for Starting a Small Scale Business with Investment of 25 Lakhs (Plant and Machinery). Highly Profitable Busi... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Manufacturing of CPVC (Chlorinated Polyvinyl Chloride)
Manufacturing of CPVC (Chlorinated Polyvinyl Chloride)

 

CPVC could be a high-temperature plastic pressure piping system introduced for ... Read More

Capacity : Chlorinated Polyvinyl Chloride: 80 MT/ Day
Plant and Machinery cost: 588.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):28.00%
Break Even Point (BEP):49.00 %
TCI :0.00 Lakhs
Cost of Project : 2283.00Lakhs
Add To Inquiry Basket
Plant‐Based Meat Alternatives -Meat Analogue, Vegan Meat & Mock Meat Manufacturing from Soyabean and Wheat Gluten
Plant‐Based Meat Alternatives -Meat Analogue, Vegan Meat & Mock Meat Manufacturing from Soyabean and Wheat Gluten

A meat analogue, also referred to as a meat alternative or substitute, or as mock, imitation, vegetarian, or vegan mea... Read More

Capacity : Meat Analogue (200 gms each Pack): 1000 Packs / Day Vegan Meat (200 gms each Pack): 1000 Packs / Day
Plant and Machinery cost: 17.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):62.00 %
TCI :0.00 Lakhs
Cost of Project : 138.00Lakhs
Add To Inquiry Basket
Beer Production from Rice with Packaging in Can & Bottles
Beer Production from Rice with Packaging in Can & Bottles

Beer is distributed in bottles and cans and is additionally commonly available on draught, particularly in pubs and bars. The brewing industry may ... Read More

Capacity : Rice Beer (650 ml Bottle):12,924 No’s/Day Rice Beer (500 ml Can): 16,800 No’s/Day
Plant and Machinery cost: 2631.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):42.00 %
TCI :0.00 Lakhs
Cost of Project : 4596.00Lakhs
Add To Inquiry Basket
Fresh Dips
Fresh Dips

Fresh DIP is a creamy liquid that is served with food or used to prepare foods. Sauces add flavor and moisture to food... Read More

Capacity : Fresh Dips 50 gms Size Pkts: 1,500,000 Pkts per annum Fresh Dips 20 gms Size Pkts: 3,750,000 Pkts
Plant and Machinery cost: 30.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):30.00%
Break Even Point (BEP):59.00 %
TCI :0.00 Lakhs
Cost of Project : 213.00Lakhs
Add To Inquiry Basket
Electric PCC Poles
Electric PCC Poles

Pre-Stressed Cement Concrete Poles (PCC Poles) are highly durable and strong. PCC Poles are fabricated from excellent ... Read More

Capacity : Electric Pre-stressed Concrete Cement Poles: 24,000 Nos. per annum
Plant and Machinery cost: 284.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):64.00 %
TCI :0.00 Lakhs
Cost of Project : 487.00Lakhs
Add To Inquiry Basket
Biodegradable Plastic Pellets (Corn Starch Thermoplastic & Polyvinyl Alcohol) PBAT & Corn Starch Thermoplastic PLA  PBAT Corn Starch Thermoplastic PLA  PBAT  CaCO3
Biodegradable Plastic Pellets (Corn Starch Thermoplastic & Polyvinyl Alcohol) PBAT & Corn Starch Thermoplastic PLA PBAT Corn Starch Thermoplastic PLA PBAT CaCO3

Among the biodegradable polymers made from renewable resources, starch is probably the most renewable naturally biodeg... Read More

Capacity : 1,200,000 Kgs per Annum
Plant and Machinery cost: 128.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):29.00%
Break Even Point (BEP):48.00 %
TCI :0.00 Lakhs
Cost of Project : 407.00Lakhs
Add To Inquiry Basket
Helmet Manufacturing
Helmet Manufacturing

A motorcycle helmet is a type of helmet (protective headgear) used by motorcycle riders. The primary goal of a motorcy... Read More

Capacity : 1,200 Nos. per day
Plant and Machinery cost: 246.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):26.00%
Break Even Point (BEP):58.00 %
TCI :0.00 Lakhs
Cost of Project : 602.00Lakhs
Add To Inquiry Basket
Bamboo Toothbrush
Bamboo Toothbrush

The toothbrush is an oral hygiene instrument used to clean the teeth, gums, and tongue. It consists of a head of tightly clustered bristle, atop of... Read More

Capacity : Bamboo Toothbrush (4 Pcs. per Pack): 2,280 Packs per day Bamboo Toothbrush (1 Pc. per Pack): 9,120 P
Plant and Machinery cost: 80.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):27.00%
Break Even Point (BEP):39.00 %
TCI :0.00 Lakhs
Cost of Project : 695.00Lakhs
Add To Inquiry Basket
Fruits & Vegetables Powder Manufacturing Business
Fruits & Vegetables Powder Manufacturing Business

Fruits & Vegetables Powder Manufacturing Business. Production of Tomato, Onion, M... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Production of Biodegradable plastic Products. Bioplastic Products Manufacturing Business
Production of Biodegradable plastic Products. Bioplastic Products Manufacturing Business

Production of Biodegradable plastic Products. Bioplastic Products Manufacturing Business.  Biodegrad... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
Electric Motor Rewinding Business. Emerging Investment Opportunities in Rewinding of Burnt Electric Motors Industry
Electric Motor Rewinding Business. Emerging Investment Opportunities in Rewinding of Burnt Electric Motors Industry

Electric Motor Rewinding Business. Emerging Investment Opportunities in Rewinding of Burnt Electric Motors Industr... Read More

Capacity : 0
Plant and Machinery cost: 0.00 Lakhs
Working Capital : 0.00
Rate of Return (ROR):0.00%
Break Even Point (BEP):0.00 %
TCI :0.00 Lakhs
Cost of Project : 0.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
Start Production Of Potat... Potato Flakes 2 MT Per Day 25.00 563.00
Setup Manufacturing Unit ... Saddle 7,000 Unit Per Day Pedals 10,000 Unit Per Day 31.00 575.00
Opportunity in Sodium Sul... Sodium Sulfide Flakes 10,000 MT Per Annum 30.00 1426.00
Business Plan for Lithium... - 29.00 812.00
Start Manufacturing Busin... Cargo Containers (Size 20 Feet) 34 Nos Per Day 29.00 1992.00
Start Cutting and Grindin... Cutting Disc Size: (115 mm x 1 mm) 2,000 Pcs Pr Day Grinding Disc (115 mm x 6 mm) 2,000 Pcs Pr Day 28.00 423.00
Mink Blankets Production - 27.00 6000.00
A Business Plan for Micro... Micronutrient Fortified Energy Dense Food 100 MT Per Day 28.00 3500.00
Start Business of Caustic... - 25.00 56500.00
Start Crumb Rubber Powder... Crumb Rubber Powder 10 MT Per Day By Product Steel Wire 2 MT Per Day 26.00 303.00
Manufacturing of Hand San... 0 0.00 0.00
Production of Herbal Ayur... 0 0.00 0.00
Gold and Diamond Jeweller... Gold Jewellery:9.50 Kgs /day Gold Plus Diamond Jewellery :2.38 Kgs / day 34.00 2504.00
Skill Development Centre Engineering Graduates: 250 Students / Batch Supervisory & Workmen Cadre: 250 Students / Batch Each B 15.00 1228.00
Hand Sanitizer Hand Sanitizer (50 ml size Bolltes):10,000 Bottles/day 31.00 156.00
Particle Board from Wheat... Particle Board (Size 6x3x0.471') : 5,000,000.0 Sq.Mtrs. / Annum 28.00 930.00
2nd Revised Edition of Th... 0 0.00 0.00
Business Ideas and Opport... 0 0.00 0.00
Manufacturing Opportuniti... 0 0.00 0.00
Production of A4 and A3 S... 0 0.00 0.00
Investment Opportunities ... 0 0.00 0.00
Start a Production Of Com... Compressed Bio Gas 6 MT Per Day Spent Slurry as Manure 60 MT Per Day 27.00 522.00
Start Industry Of Craft B... Craft Beer (Bottles 650 ml Size) 3,847 Bottles per day Craft Beer (Al. Cans 500 ml Size) 5,000 Bot 27.00 2007.00
Setup plant of Acetate T... Acetate Tow 8 MT Per Day 29.00 1426.00
Setup Plant Of Titanium ... Titanium Dioxide 4 MT Per Day 27.00 1455.00
Setup Plant Of Lab Cultu... Lab Cultured Diamonds (1 Carat) 30 Carat Per Day 25.00 361.00
Start Lemon Processing Un... Lemon Juice Dry Powder 104 Kgs per day Lemon Peel Oil 40 Kgs per day Lemon Pectin 140 Kgs 25.00 314.00
Solar PV (Photovoltaic) G... Solar PV (Photovoltaic) Glass 90,000 MT Per Annum 28.00 4200.00
12345678910...

Showing 181 - 240 of 2573 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

ABOUT NPCS

 

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report,  Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

 


And before diversifying/venturing into any product, wish to study the following aspects of the identified product:


• Good Present/Future Demand
• Export-Import Market Potential
• Raw Material & Manpower Availability
• Project Costs and Payback Period


We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

 

The report contains all the data which will help an entrepreneur find answers to questions like:

• Why I should invest in this project?
• What will drive the growth of the product?
• What are the costs involved?
• What will be the market potential?


The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product.

The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.


Reasons for buying the report:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.

• This report provides vital information on the product like its definition, characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.

 

Our Approach:


• Our research reports broadly cover Indian markets, present analysis, outlook and forecast.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players. 

• We use reliable sources of information and databases.  And information from such sources is processed by us and included in the report.

 

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

 

 

Ø  Introduction

·         Project Introduction

·         Project Objective and Strategy

·         Concise History of the Product

·         Properties

·         BIS (Bureau of Indian Standards) Provision & Specification

·         Uses & Applications

 

Ø  Market Study and Assessment

·         Current Indian Market Scenario

·         Present Market Demand and Supply

·         Estimated Future Market Demand and Forecast

·         Statistics of Import & Export

·         Names & Addresses of Existing Units (Present Players)

·         Market Opportunity

 

Ø  Raw Material

·         List of Raw Materials

·         Properties of Raw Materials

·         Prescribed Quality of Raw Materials

·         List of Suppliers and Manufacturers

 

Ø  Personnel (Manpower) Requirements

·         Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel

 

Ø  Plant and Machinery

·         List of Plant & Machinery

·         Miscellaneous Items

·         Appliances & Equipments

·         Laboratory Equipments & Accessories

·         Electrification

·         Electric Load & Water

·         Maintenance Cost

·         Sources of Plant & Machinery (Suppliers and Manufacturers)

 

Ø  Manufacturing Process and Formulations

·         Detailed Process of Manufacture with Formulation

·         Packaging Required

·         Process Flow Sheet Diagram

 

Ø  Infrastructure and Utilities

·         Project Location

·         Requirement of Land Area

·         Rates of the Land

·         Built Up Area

·         Construction Schedule

·         Plant Layout and Requirement of Utilities

 

Project at a Glance

Along with financial details as under:

 

  •     Assumptions for Profitability workings

  •    Plant Economics

  •    Production Schedule

  •    Land & Building

            Factory Land & Building

            Site Development Expenses

  •    Plant & Machinery

             Indigenous Machineries

            Other Machineries (Miscellaneous, Laboratory etc.)

  •    Other Fixed Assets

            Furniture & Fixtures

            Pre-operative and Preliminary Expenses

            Technical Knowhow

            Provision of Contingencies

  •   Working Capital Requirement Per Month

             Raw Material

            Packing Material

            Lab & ETP Chemical Cost

           Consumable Store

  •   Overheads Required Per Month And Per Annum

         Utilities & Overheads (Power, Water and Fuel Expenses etc.)

             Royalty and Other Charges

            Selling and Distribution Expenses

  •    Salary and Wages

  •    Turnover Per Annum

  •   Share Capital

            Equity Capital

            Preference Share Capital

 

  •    Annexure 1:: Cost of Project and Means of Finance

  •    Annexure 2::  Profitability and Net Cash Accruals

                Revenue/Income/Realisation

                Expenses/Cost of Products/Services/Items

                Gross Profit

                Financial Charges     

                Total Cost of Sales

                Net Profit After Taxes

                Net Cash Accruals

  •   Annexure 3 :: Assessment of Working Capital requirements

                Current Assets

                Gross Working. Capital

                Current Liabilities

                Net Working Capital

                Working Note for Calculation of Work-in-process

  •    Annexure 4 :: Sources and Disposition of Funds

  •    Annexure 5 :: Projected Balance Sheets

                ROI (Average of Fixed Assets)

                RONW (Average of Share Capital)

                ROI (Average of Total Assets)

  •    Annexure 6 :: Profitability ratios

                D.S.C.R

                Earnings Per Share (EPS)

               

             Debt Equity Ratio

        Annexure 7   :: Break-Even Analysis

                Variable Cost & Expenses

                Semi-Var./Semi-Fixed Exp.

                Profit Volume Ratio (PVR)

                Fixed Expenses / Cost 

                B.E.P

  •   Annexure 8 to 11:: Sensitivity Analysis-Price/Volume

            Resultant N.P.B.T

            Resultant D.S.C.R

   Resultant PV Ratio

   Resultant DER

  Resultant ROI

          Resultant BEP

  •    Annexure 12 :: Shareholding Pattern and Stake Status

        Equity Capital

        Preference Share Capital

  •   Annexure 13 :: Quantitative Details-Output/Sales/Stocks

        Determined Capacity P.A of Products/Services

        Achievable Efficiency/Yield % of Products/Services/Items 

        Net Usable Load/Capacity of Products/Services/Items   

       Expected Sales/ Revenue/ Income of Products/ Services/ Items   

  •    Annexure 14 :: Product wise domestic Sales Realisation

  •    Annexure 15 :: Total Raw Material Cost

  •    Annexure 16 :: Raw Material Cost per unit

  •    Annexure 17 :: Total Lab & ETP Chemical Cost

  •    Annexure 18  :: Consumables, Store etc.,

  •    Annexure 19  :: Packing Material Cost

  •    Annexure 20  :: Packing Material Cost Per Unit

  •    Annexure 21 :: Employees Expenses

  •    Annexure 22 :: Fuel Expenses

  •    Annexure 23 :: Power/Electricity Expenses

  •    Annexure 24 :: Royalty & Other Charges

  •    Annexure 25 :: Repairs & Maintenance Exp.

  •    Annexure 26 :: Other Mfg. Expenses

  •    Annexure 27 :: Administration Expenses

  •    Annexure 28 :: Selling Expenses

  •    Annexure 29 :: Depreciation Charges – as per Books (Total)

  •   Annexure 30   :: Depreciation Charges – as per Books (P & M)

  •   Annexure 31   :: Depreciation Charges - As per IT Act WDV (Total)

  •   Annexure 32   :: Depreciation Charges - As per IT Act WDV (P & M)

  •   Annexure 33   :: Interest and Repayment - Term Loans

  •   Annexure 34   :: Tax on Profits

  •   Annexure 35   ::Projected Pay-Back Period And IRR