Please choose a project below related to this category.
The term parboiling covers the operation to which the paddy is subjected before milling. Water and heat are the two main elements in the process. Afte...
|
Capacity : Parboiled Rice: 3000 MT/Annum, Broken Rice : 230 MT/A, Rice Flake 1500 MT/A, Corn Flakes:1500 MT/A |
Plant and Machinery cost: Rs. 85 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 40.00 |
|
Break Even Point (BEP): 58.00 |
TCI : Cost of Project Rs. 308 Lakhs |
|
Cost of Project : 0 |
Polychloroprenes, is the basis for one of the largest and most important groups of rubber adhesives. Four important applications for polychloropren...
|
Capacity : 270 MT/Annum |
Plant and Machinery cost: Rs. 39 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 44.00 |
TCI : Cost of Project Rs. 142 Lakhs |
|
Cost of Project : 14200000 |
The covering of chocolates was originally carried out solely by hand the process being known as hand dipping. Each piece or centre was handled individ...
|
Capacity : 600 Kg./day |
Plant and Machinery cost: Rs. 27 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 53.00 |
|
Break Even Point (BEP): 38.00 |
TCI : Rs. 131 Lakhs |
|
Cost of Project : 0 |
Maize is one of the best cereals after paddy and wheat. It is largely cultivated in the north and west India, though there is cultivation of maize in...
|
Capacity : 200 MT Maize Processing/Day Products Starch 133 MT, Glucose 20 MT, Gluten 18 MT Germ 8 MT, Fiber 4 MT |
Plant and Machinery cost: 2913 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 41.00 |
|
Break Even Point (BEP): 58.00 |
TCI : Cost of Project 6084 Lakhs |
|
Cost of Project : 0 |
Maize is one of the best cereals after paddy and wheat. It is largely cultivated in the north and west India, though there is cultivation of maize in...
|
Capacity : 200 MT Maize Processing/Day Products, Starch 133 MT, Glucose 20 MT, Gluten 18 MT, Germ 8 MT, Fiber 4 MT |
Plant and Machinery cost: 2913 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 41.00 |
|
Break Even Point (BEP): 58.00 |
TCI : Cost of Project 6084 Lakhs |
|
Cost of Project : 0 |
Adhesives are advantageous over other methods of joining materials. Thin films, fibers and small particles that cannot be combined satisfactorily by o...
|
Capacity : 1500 MT/Annum |
Plant and Machinery cost: 32 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 51.00 |
|
Break Even Point (BEP): 77.00 |
TCI : Cost of Project 92 Lakhs |
|
Cost of Project : 9200000 |
Chilli is cultivated mostly as a rein-fed crop, but in areas of low rainfall it is grown under irrigation. In the genetic area, it is a cold weather c...
|
Capacity : 500 Kgs/Day |
Plant and Machinery cost: 2 Lakh |
|
Working Capital : |
Rate of Return (ROR): 54.00 |
|
Break Even Point (BEP): 43.00 |
TCI : 28 Lakh |
|
Cost of Project : 0 |
Fruit juices/drinks can be classified as the liquid and pulpy material in relatively homogeneous forms derived from fruit. A glass of fruit juice is a...
|
Capacity : 300000 Packs/day (Orange & Pineapple)Each Pack 200 ml. |
Plant and Machinery cost: 205 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 57.00 |
|
Break Even Point (BEP): 26.00 |
TCI : 1414 Lakhs |
|
Cost of Project : 0 |
The palm oil which originated in West Africa is also extensively cultivated in Congo, South East Asia and Central and South America. An old palm now g...
|
Capacity : 12 MT/day |
Plant and Machinery cost: 44 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 58.00 |
|
Break Even Point (BEP): 27.00 |
TCI : 420 Lakhs |
|
Cost of Project : 0 |
The palm oil which originated in West Africa is also extensively cultivated in Congo, South East Asia and Central and South America. An old palm now g...
|
Capacity : 12 MT/day |
Plant and Machinery cost: 44 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 58.00 |
|
Break Even Point (BEP): 27.00 |
TCI : 420 Lakhs |
|
Cost of Project : 0 |
Chilli powder is one of the widely used spices. There is more than 10% demand of growing market. Chilli powder can be produced by automatic plant and...
|
Capacity : 5 MT/day |
Plant and Machinery cost: 21 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 68.00 |
|
Break Even Point (BEP): 26.00 |
TCI : 261 Lakhs |
|
Cost of Project : 0 |
Aluminium extrusion products are widely used in transport industry, rail roads, electronics and housing industry etc. The manufacturing of extruded pr...
|
Capacity : 2 MT/day |
Plant and Machinery cost: 75 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 52.00 |
|
Break Even Point (BEP): 37.00 |
TCI : 313 Lakhs |
|
Cost of Project : 0 |