We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
Profile PP woven sacks laminated with PP liner have wider applications. PP woven sacks are much stronger & can withstand much higher impact loads bec...
|
Capacity : 1 Lakh No.s/day |
Plant and Machinery cost: 171 Lakh |
|
Working Capital : - |
Rate of Return (ROR): 47.00 |
|
Break Even Point (BEP): 49.00 |
TCI : Cost of Project : 561 Lakh |
|
Cost of Project : 56100000 |
Profile Unplasticised polyvinylchloride (abbreviated as UPVC) is most often the choice of the building industry as a low-maintenance and relatively l...
|
Capacity : 2160 MT UPVC Pipes (Different Diameter)/Annum |
Plant and Machinery cost: 146 Lakh |
|
Working Capital : - |
Rate of Return (ROR): 42.00 |
|
Break Even Point (BEP): 59.00 |
TCI : Cost of Project : 518 Lakh |
|
Cost of Project : 0 |
Profile PET polyethylene terephthalate is a form of polyester or resin, clear and lightweight, non-reactive, economical, and shatterproof plastic use...
|
Capacity : 12000000 No.s/Annum, Size: 0.5, 1, 2 Ltrs Capacity |
Plant and Machinery cost: 82 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 51.00 |
TCI : Cost of project : 231 Lakhs |
|
Cost of Project : 23100000 |
Profile Floral Foam is the plastic spongy material that florists use to put their many beautiful flower designs in place. It has effectively replace...
|
Capacity : 3000000 Pcs (Each 50 gm)/Annum |
Plant and Machinery cost: 69 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 42.00 |
|
Break Even Point (BEP): 53.00 |
TCI : Cost of project : 284 Lakhs |
|
Cost of Project : 28400000 |
Profile Resins are translucent and viscous film forming material widely used for production of paints and coatings. It binds the pigment particles to...
|
Capacity : 10 MT/day |
Plant and Machinery cost: 178 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 50.00 |
|
Break Even Point (BEP): 31.00 |
TCI : 1318 Lakhs |
|
Cost of Project : 0 |
Product Profile: Non woven bags are made of a sheet of fibers and continuous filaments or chopped yarns of any nature or origin, that have been forme...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Product Profile: Non woven fabric is a fabric like material made from long fibres, bonded together by chemical, mechanical, heat or solvent treatment...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Profile: PPR pipe is known polypropylene pipes, Polypropylene random copolymer with a pipe by extrusion, injection molding a tube. PPR Pipe is used i...
|
Capacity : 5760 MT PPR pipes/Annum,14400000 Pieces/ Annum, PPR fitting |
Plant and Machinery cost: 288 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 40.00 |
|
Break Even Point (BEP): 70.00 |
TCI : Cost of project: 913 Lakhs |
|
Cost of Project : 91300000 |
Profile: PPR pipe is known polypropylene pipes, Polypropylene random copolymer with a pipe by extrusion, injection molding a tube. PPR Pipe is used i...
|
Capacity : 5760 MT PPR pipes/Annum,14400000 Pieces/ Annum, PPR fitting |
Plant and Machinery cost: 288 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 40.00 |
|
Break Even Point (BEP): 70.00 |
TCI : Cost of project: 913 Lakhs |
|
Cost of Project : 91300000 |
Profile: Unsaturated polyester resins are produced by the polycondensation of saturated and unsaturated dicarboxylic acids with glycols. Unsaturated...
|
Capacity : 1000 Kg/day |
Plant and Machinery cost: 53 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 41.00 |
|
Break Even Point (BEP): 42.00 |
TCI : 228 Lakhs |
|
Cost of Project : 0 |
PRODUCT PROFILE: BT-Epoxy belongs to the group of thermoset resins used in printed circuit boards (PCBs). It is a mixture of epoxy resin, a common ra...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
PRODUCT PROFILE Acrylonitrile butadiene styrene resins (ABS) are the largest-volume engineering thermoplastic resin. It is a copolymer made by polyme...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2014-. All rights reserved.
