We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
Woven fabric is a textile formed by weaving. It is produced on a loom, and made of many threads woven on a warp and a we...
|
Capacity : 2 Lakh nos. /Day |
Plant and Machinery cost: Rs. 898 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project : Rs. 1794 Lakhs |
|
Cost of Project : 179400000 |
ABS granules stands for Acrylo Nitrile Butadyne Styrene granules. Their chemical composition render them the physical properties like hardness, rigidi...
|
Capacity : 1800 MT/ Annum |
Plant and Machinery cost: Rs.214 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 42.00 |
TCI : Cost of Project : Rs.1133 Lakhs |
|
Cost of Project : 113300000 |
Plastic is a very common material that is now widely used by everybody in this world. Plastic is used in many ways as it is light weight and compact....
|
Capacity : 960000 Kgs / Annum |
Plant and Machinery cost: Rs.58 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Cost of Project : Rs.191 Lakhs |
|
Cost of Project : 19100000 |
PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : 18000 Sq. Mtrs./Day |
Plant and Machinery cost: 236 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 54.00 |
TCI : Cost of Projects: 455 Lakhs |
|
Cost of Project : 45500000 |
Wood plastic composite is good to solve the problem arises in the environment. There is scope of use agricultural waste product. In this case we will...
|
Capacity : 1152 MT/Annum |
Plant and Machinery cost: 75 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 45.00 |
TCI : Cost of Projects: 288 Lakhs |
|
Cost of Project : 28800000 |
Polyurethane is a polymer obtained by an exothermal reaction between Isocyanate (MDI diphenylmethane-diisocyanate or TDI toluendiisocyanate) and Polyo...
|
Capacity : 1440 MT/Annum |
Plant and Machinery cost: 178 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 58.00 |
TCI : Cost of Projects: 496 Lakhs |
|
Cost of Project : 49600000 |
PP/HDPE woven sacks laminated with LDPE/PP liner have wider applications. HDPE woven sacks are much stronger & can withstand much higher impact loads...
|
Capacity : 20000Nos. /Day |
Plant and Machinery cost: 297 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 61.00 |
TCI : Cost of Projects: 525 Lakhs |
|
Cost of Project : 52500000 |
ABS is a common thermoplastic. These plastics can be compounded with a high degree of hardness, or with great flexibility and toughness, hard and are...
|
Capacity : 1440 MT/Annum |
Plant and Machinery cost: 55 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 64.00 |
TCI : Cost of Project: 192 Lakhs |
|
Cost of Project : 19200000 |
PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : 5400000 MT/annum |
Plant and Machinery cost: Rs. 235 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.32 |
|
Break Even Point (BEP): 54.35 |
TCI : Cost of Project: Rs. 455 Lakhs |
|
Cost of Project : 45500000 |
It is an instrument which is used for injecting any liquid into the body of human beings or of animals. The Indian healthcare sector, including pharma...
|
Capacity : 180 Lakh Nos. /annum |
Plant and Machinery cost: Rs.245 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 46.00 |
TCI : Cost of Project:Rs. 455 Lakhs |
|
Cost of Project : 45500000 |
The epoxy resins have steadily grown in their use in the plastics and related industries due to the variety of forms in which they may be processed. E...
|
Capacity : 300 MT/Annum |
Plant and Machinery cost: Rs. 24 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 48.00 |
|
Break Even Point (BEP): 35.00 |
TCI : Cost of Project: Rs 97 Lakhs |
|
Cost of Project : 9700000 |
PETG resins are thermoplastic polyester engineering resins .PETG is sort of plastic without nitrogen, sulphur and halogen components and wit...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : -- |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2014-. All rights reserved.
