We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
PVC Flex is made out of PVC and Fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : - |
Plant and Machinery cost: 227 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 45.00 |
|
Break Even Point (BEP): 54.00 |
TCI : Cost of Project : 417 Lakhs |
|
Cost of Project : 41700000 |
Provision of drinking water supply or in other words ‘piped water’ supply to urban and rural population, constitutes an important aspect of developmen...
|
Capacity : 900 MT/Annum |
Plant and Machinery cost: 47 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 42.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project 195 Lakhs |
|
Cost of Project : 0 |
PVC pipes are produced by extrusion process followed by calibration to ensure maintenance of accurate internal dia with smooth internal boxes. The pi...
|
Capacity : - |
Plant and Machinery cost: 208 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 52.00 |
|
Break Even Point (BEP): 34.00 |
TCI : 1014 Lakhs |
|
Cost of Project : 0 |
Polyurethane is a polymer obtained by an exothermal reaction between Isocyanate (MDI diphenylmethane-diisocyanate or TDI toluendiisocynate) and polyol...
|
Capacity : 240000 Kg./Annum |
Plant and Machinery cost: 120 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 57.00 |
TCI : Cost of Project : 263 Lakhs |
|
Cost of Project : 0 |
Water storage tanks are an attractive alternative to steel tanks. They do not corrode and available in different colours. Water tanks are used to ensu...
|
Capacity : - |
Plant and Machinery cost: 167 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 49.00 |
|
Break Even Point (BEP): 28.00 |
TCI : Total Capital Investment : 1246 Lakhs |
|
Cost of Project : 0 |
Polymers have found uses in all spheres of life with demand for better materials, greater functional utility, more economical packaging and versatile...
|
Capacity : 3000 MT/Annum |
Plant and Machinery cost: 129 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 45.00 |
|
Break Even Point (BEP): 32.00 |
TCI : 675 Lakhs |
|
Cost of Project : 0 |
A door is a movable structure used to close off an entrance, typically consisting of a panel that swings on hinges or that slides or rotates inside of...
|
Capacity : 100000 Nos./Annum (PVC Doors) |
Plant and Machinery cost: 293 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 45.00 |
|
Break Even Point (BEP): 49.00 |
TCI : 1557 Lakhs |
|
Cost of Project : 0 |
One of the most popular forms of packaging is Flexible Packaging. Flexible Package is easy to hold, convenient to store and simple to use. Made up of...
|
Capacity : - |
Plant and Machinery cost: 365 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 59.00 |
TCI : Cost of Project : 824 Lakhs |
|
Cost of Project : 0 |
The term Plastics usually refers to a large and varied group of synthetic materials which are solid in finished form but at some stage in their proces...
|
Capacity : - |
Plant and Machinery cost: 167 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 49.00 |
|
Break Even Point (BEP): 28.00 |
TCI : 1245 Lakhs |
|
Cost of Project : 0 |
Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requireme...
|
Capacity : - |
Plant and Machinery cost: 636 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 46.00 |
|
Break Even Point (BEP): 42.00 |
TCI : Cost of Project : 837 Lakhs |
|
Cost of Project : 0 |
Proper storage of water is essential for various uses like bathing, cleaning, drinking, cooking etc. Water tanks are used to ensure safe and clean wat...
|
Capacity : 50000 Nos./Annum,PVC Storage Tanks,Storage Tank Cap. 1000 Ltrs. |
Plant and Machinery cost: 350 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 48.00 |
|
Break Even Point (BEP): 40.00 |
TCI : 1389 Lakhs |
|
Cost of Project : 0 |
Chlorinated polyethylene (CPE) is one kind of high molecule elastic material developed in late years, which is one of the random chloride produced thr...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2014-. All rights reserved.
