We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
Shrink sleeve labels are sleeves constructed from film material that, rather than using adhesive, shrinks to a product’s surface when heat is applied....
|
Capacity : PVC Shrink Sleeves:400 Pkts/Day |
Plant and Machinery cost: Rs 72 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 13.16 |
|
Break Even Point (BEP): 66.91 |
TCI : Cost of Project:Rs 202 Lakhs |
|
Cost of Project : 20200000 |
A double wall pipe is the most common corrugated pipe design for drainage and sewage. Various different designs of pipes are available, such as single...
|
Capacity : 20 Mt/Day |
Plant and Machinery cost: Rs 808 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.25 |
|
Break Even Point (BEP): 51.34 |
TCI : Cost of Project:Rs 1510 Lakhs |
|
Cost of Project : 151000000 |
Plastic, today, is being increasingly utilized in almost every industry and activity. Its use has become indispensable due mainly to certain inherent...
|
Capacity : LDPE/LLDPE Pouch Films :1.2 MT/Day |
Plant and Machinery cost: Rs 30 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 24.32 |
|
Break Even Point (BEP): 41.09 |
TCI : Cost of Project:Rs 254 Lakhs |
|
Cost of Project : 25400000 |
The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from...
|
Capacity : Single Core Wires (THHN/THWN)465 KM/Day •Single Core Stranded (CU/PVC)350 KM/Day •Multiple-Core Flexible-Wire (Sheathed) 164 KM/Day |
Plant and Machinery cost: Rs 225 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 62.00 |
TCI : Cost of Project: Rs 1034 Lakhs |
|
Cost of Project : 103400000 |
PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : •pPVC Flex Banner (Frontlit/Backlit) 340 gsm:15000 Sq.MT/Day •PVC Flex Banner Vinyl :3000 Sq.MT/Day |
Plant and Machinery cost: Rs 235 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 54.00 |
TCI : Cost of Project : Rs 455 Lakhs |
|
Cost of Project : 45500000 |
There are many kinds of plastics in the world, any plastics when react with the Blowing Agent will become "Foam" which generally called "Foam Plastics...
|
Capacity : Glasses: 324000 Glasses/Day, Plates: 162000 Plates/Day |
Plant and Machinery cost: Rs 73 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 49.00 |
|
Break Even Point (BEP): 35.00 |
TCI : Rs 245 Lakhs |
|
Cost of Project : 0 |
Plastic (HDPE, PVC, UPVC and RCC) Pipes [NPCS/4771/22821, 22826] PVC pipes are made out of a material known as polyvinyl chloride, a durable, stro...
|
Capacity : HDPE Pipes:83.3 MT/Day, PVC Pipes: 83.3 MT/Day |
Plant and Machinery cost: Rs 938 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 30.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Cost of Project: Rs 2124 Lakhs |
|
Cost of Project : 212400000 |
Artificial leather is a fabric or finish intended to substitute for leather in fields such as upholstery, clothing, and fabrics, and other uses where...
|
Capacity : PU Leather Cloth:25000 Mtrs/Day,PVC Leather Cloth: 25000 Mtrs/Day |
Plant and Machinery cost: Rs 1338 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 43.00 |
TCI : Cost of Project: Rs 2780 Lakhs |
|
Cost of Project : 278000000 |
Collapsible tubes are very popular product and are made from tin sheet. Now, the tin sheet made collapsible tubes have been substituted by polythene c...
|
Capacity : Plastic Collapsible Tubes: 150,000 Nos./Day |
Plant and Machinery cost: Rs 138Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project: Rs 396 Lakhs |
|
Cost of Project : 39600000 |
The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from...
|
Capacity : Single Core Wires (THHN/THWN) 60 KM/Day,Single Core Stranded (CU/PVC)45 KM/Day,Multiple-Core Flexible-Wire (Sheathed)21 KM/Day |
Plant and Machinery cost: Rs 55 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 31.00 |
|
Break Even Point (BEP): 71.00 |
TCI : Cost of Project: Rs 189 Lakhs |
|
Cost of Project : 18900000 |
Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The sys...
|
Capacity : 30000 Nos./Day |
Plant and Machinery cost: Rs 426 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 48.00 |
TCI : Cost of Project: Rs 1465 Lakhs |
|
Cost of Project : 146500000 |
PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing...
|
Capacity : PVC Flex Banner (Frontlit/Backlit) 440 g/m2:13 MT/Day•PVC Flex Banner Vinyl 440 g/m2:12 MT/Day |
Plant and Machinery cost: Rs 832 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 48.00 |
TCI : Cost of Project Rs 1208 Lakhs |
|
Cost of Project : 120800000 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2017-. All rights reserved.
