We must explain to you how all seds this mistakens idea denouncing pleasures and praising account. All seds this mistakens idea denouncing pleasures.
Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.
The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.
The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.
Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.
India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years. Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.
Please choose a project below related to this category.
An optical fiber (or optical fibre) is a flexible, transparent fiber made of extruded glass (silica) or plastic, slightly thicker than a human hair. I...
|
Capacity : 50 KMeters/Day |
Plant and Machinery cost: Rs 3563 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 19.00 |
|
Break Even Point (BEP): 46.00 |
TCI : Cost of Project : Rs 4266 Lakhs |
|
Cost of Project : 426600000 |
Generally, pencil sharpeners can be classified into electric pencil sharpeners and manual pencil sharpeners. Since the electric pencil sharpeners are...
|
Capacity : 5000 Pcs/Day |
Plant and Machinery cost: Rs 9 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 72.00 |
TCI : Cost of Project : Rs 24 Lakhs |
|
Cost of Project : 2400000 |
Petroleum, oily, flammable liquid that occurs naturally in deposits, usually beneath the surface of the earth; it is also called crude oil. It consist...
|
Capacity : Gasoline: 200 MT/Day•Naphtha: 150 MT/Day•Middle Distillate: 150 MT/Day•Lube Oil : 250 MT/Day •Asphalt: 150 MT/Day |
Plant and Machinery cost: Rs 19722 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 46.00 |
TCI : Cost of Project : Rs 24965 Lakhs |
|
Cost of Project : 2496500000 |
During the past 40–50 years, foamed polymers have found increasing importance in the world market place due to the unique characteristics and properti...
|
Capacity : 15 MT/day |
Plant and Machinery cost: Rs 57 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 50.00 |
TCI : Cost of Project : Rs 713 Lakhs |
|
Cost of Project : 71300000 |
Injection moulding is one of the most important processes used in plastic articles manufacture in terms of volume thermo-plastics handled and the rang...
|
Capacity : Moulded Products : 100 MT/ Day,Toilet Cleaner Brush : 5000 Nos/Day |
Plant and Machinery cost: Rs 155 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 33.00 |
|
Break Even Point (BEP): 60.00 |
TCI : Cost of Project : Rs 653 Lakhs |
|
Cost of Project : 65300000 |
Bicycle and rickshaw tyres & tubes are the backbone of the bicycle and rickshaw. There are few numbers of organized manufacturing companies which are...
|
Capacity : Rickshaw & Cycle Tyres : 1,500.00 Nos./Day,Rickshaw & Cycle Tubes: 1,500.00 Nos./Day |
Plant and Machinery cost: 128 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 72.00 |
TCI : Cost of Project : 570 Lakhs |
|
Cost of Project : 57000000 |
Packaging adds value to products for a consumer and has a vital role to play in a product’s journey from manufacturer to end consumers. It is a...
|
Capacity : - |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 1.00 |
|
Break Even Point (BEP): 0.00 |
TCI : - |
|
Cost of Project : 0 |
Onion is one of major bulb crop grown in India which presently attracting attention of all persons due to rise in prices. The price is directly relate...
|
Capacity : Dehydrated Onion (Chopped and Sliced) : 3 MT/Day,Dehydrated Onion Powder: 3 MT/Day |
Plant and Machinery cost: Rs. 215 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 25.00 |
|
Break Even Point (BEP): 55.00 |
TCI : Cost of Project : Rs. 503 Lakhs |
|
Cost of Project : 50300000 |
The plastic collapsible tube is a product of daily use because every paste, like thing is packed in this tube. According to an estimate, the populatio...
|
Capacity : 150000 Nos./ Day |
Plant and Machinery cost: Rs. 138 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 28.00 |
|
Break Even Point (BEP): 52.00 |
TCI : Cost of Project : Rs. 396 Lakhs |
|
Cost of Project : 39600000 |
A power cable is an assembly of two or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission...
|
Capacity : PVC Cables 1 Core: 785100 KM/annum,PVC Cables 2 Core: 8700 KM/annum,XLPE Cables 1 Core: 7800 KM/annum, XLPE Cables 2 Core : 3600 KM/annum |
Plant and Machinery cost: Rs. 764 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 31.00 |
|
Break Even Point (BEP): 55.00 |
TCI : Cost of Project: Rs. 2997 Lakhs |
|
Cost of Project : 0 |
Thermocol is formed by the synthesizing of spherical particles consisting of air (at a rate of 98%) contained within an infinite number of hollow cell...
|
Capacity : Thermocol Cups : 85320 Th. Pcs. /Annum,Thermocol Glasses: 85320 Th. Pcs. /Annum,Thermocol Plates: 384000 Th. Pcs./Annum |
Plant and Machinery cost: Rs. 244 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 27.00 |
|
Break Even Point (BEP): 51.00 |
TCI : Cost of Project: Rs. 496 Lakhs |
|
Cost of Project : 49600000 |
The epoxy resins have steadily grown in their use in the plastics and related industries due to the variety of forms in which they may be processed. A...
|
Capacity : 300 MT /Annum |
Plant and Machinery cost: Rs. 29 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 26.00 |
|
Break Even Point (BEP): 61.00 |
TCI : Cost of Project : Rs. 83 Lakhs |
|
Cost of Project : 8300000 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2017-. All rights reserved.
