NPCS has been helping entrepreneurs, startups, MSMEs, and industrial investors since 1992 with detailed project reports, feasibility studies, market research, and business consulting services across 50+ industries.
Please choose a project below related to this category.
The sanitary napkin industry is closely connected with the mode of life, which is in turn directly correlated to housing. In India, the technology for...
|
Capacity : 120000 Pcs./Day |
Plant and Machinery cost: Rs. 27 Lacs |
|
Working Capital : - |
Rate of Return (ROR): 63.00 |
|
Break Even Point (BEP): 31.00 |
TCI : Rs. 183 Lacs |
|
Cost of Project : 0 |
In the manufacture of inner tubes the plant required is fairly simple and inexpensive, the principal outlay being for wrapping machines and mandrills....
|
Capacity : 1000 Nos./day |
Plant and Machinery cost: Rs. 32 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 47.00 |
|
Break Even Point (BEP): 38.00 |
TCI : Rs. 165 lakhs |
|
Cost of Project : 0 |
Thermocole or expanded polystyrene as the name suggests, is polystyrene expanded to more than two times the volume of polystyrene. Polystyrene foam is...
|
Capacity : 400 Kgs./Day |
Plant and Machinery cost: Rs. 61 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 42.00 |
TCI : Rs. 201 Lakhs |
|
Cost of Project : 0 |
Piping may represent as much as 25 percent of the cost of a chemical-process plant. The installed cost of piping systems varies widely with the materi...
|
Capacity : 1500 MT / Annum Tubes, 600 MT/Annum Fittings |
Plant and Machinery cost: 554 Lakhs |
|
Working Capital : |
Rate of Return (ROR): 45.00 |
|
Break Even Point (BEP): 48.00 |
TCI : Cost of Project : 752 Lakhs |
|
Cost of Project : 0 |
The various pulses are part of the normal diet of all vegetarians and are also used frequently by non-vegetarians too. They are main sources of protei...
|
Capacity : 5 MT / Day |
Plant and Machinery cost: 11 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 47.00 |
|
Break Even Point (BEP): 31.00 |
TCI : 147 Lakhs |
|
Cost of Project : 0 |
Engine oil becomes contaminated with foreign material in service. In circulating systems, where a substantial quantity of oil is involved, it is desir...
|
Capacity : 1 MT/day |
Plant and Machinery cost: Rs. 20 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 44.00 |
|
Break Even Point (BEP): 41.00 |
TCI : Rs. 100 Lakhs |
|
Cost of Project : 0 |
Water quality and quantity are interdependent, interacting elements of water system. The term water quality refers to the level of suitability of wate...
|
Capacity : 10000 Ltrs./day |
Plant and Machinery cost: Rs. 60 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 40.00 |
TCI : Rs. 180 lakhs |
|
Cost of Project : 0 |
Brandies are produced in batch or continuous distillation systems. The pot still or its variation is universally used in France, where as in the Unite...
|
Capacity : 30000 Bottles/Day |
Plant and Machinery cost: Rs. 1156 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 39.00 |
TCI : Rs. 2231 Lakhs |
|
Cost of Project : 0 |
Bulk petroleum and hydrocarbons generally are most commonly stored in cylindrical tanks of welded steel. For quantities upto about 250 nos. the cylind...
|
Capacity : 10000 /day |
Plant and Machinery cost: Rs. 1 crores |
|
Working Capital : - |
Rate of Return (ROR): 54.00 |
|
Break Even Point (BEP): 21.00 |
TCI : Rs. 27 crores |
|
Cost of Project : 0 |
Deeply refined pale yellow oils are called white oil. In 1934 the white oil manufacturers association (WOMA) divided the white oils in three viscosity...
|
Capacity : 25 MT/Day |
Plant and Machinery cost: Rs. 950 lakhs |
|
Working Capital : |
Rate of Return (ROR): 45.00 |
|
Break Even Point (BEP): 35.00 |
TCI : Rs. 5 crores |
|
Cost of Project : 0 |
Dextrin is a starch derivative. It is also known as water soluble carbo hydrate produced by heat and acid depolymerization. Dextrin are made by heatin...
|
Capacity : 10 MT/Day |
Plant and Machinery cost: 51 Lakhs |
|
Working Capital : - |
Rate of Return (ROR): 47.00 |
|
Break Even Point (BEP): 38.00 |
TCI : 309 Lakhs |
|
Cost of Project : 0 |
The rubber rollers used in printing machineries are of different sizes and as per requirement. These can be manufactured by using different dies and m...
|
Capacity : 20 Pcs/Day |
Plant and Machinery cost: Rs. 15 lakhs |
|
Working Capital : - |
Rate of Return (ROR): 48.00 |
|
Break Even Point (BEP): 47.00 |
TCI : Rs. 57 lakhs |
|
Cost of Project : 0 |
Entrepreneur India, an Industrial monthly magazine on industrial development, technologies & project opportunities aims at simplifying the process of choosing the suitable project for investment.
Entrepreneur India - Copyright 2017-. All rights reserved.
