Please choose a project below related to this category.
Bricks may be made from a no. of different kinds of materials but they must usually posses a certain amount of plasticity. Fly ash is one of them. Fly...
|
Capacity : 250 Lacs Nos/Annum |
Plant and Machinery cost: Rs. 27.00 Lacs |
|
Working Capital : Rs. 62.0 Lacs |
Rate of Return (ROR): 27.16 |
|
Break Even Point (BEP): 65.69 |
TCI : Rs. 158.0 Lacs |
|
Cost of Project : 0 |
Admixtures are materials added to the concrete before or during its mixing, with a view to modifying one or more of the properties of concrete in the...
|
Capacity : 2000 Kgs/Day |
Plant and Machinery cost: 8 Lakhs |
|
Working Capital : 134 Lakhs |
Rate of Return (ROR): 52.00 |
|
Break Even Point (BEP): 41.00 |
TCI : 160 Lakhs |
|
Cost of Project : 0 |
With the vast potential of plastics, artificial synthetic marble is virtually replacing the use of natural marble. The qualities of artificial synthet...
|
Capacity : 3 MT/Day |
Plant and Machinery cost: Rs. 17 Lakhs |
|
Working Capital : Rs. 54 Lakhs |
Rate of Return (ROR): 43.00 |
|
Break Even Point (BEP): 49.00 |
TCI : Rs. 121 Lakhs |
|
Cost of Project : 0 |
The general outlook for the cement industry is fulfilled the situation in a large body of Indian Industry, with a market rise in production failing to...
|
Capacity : 50 MT/Day |
Plant and Machinery cost: Rs. 84 Lacs |
|
Working Capital : Rs. 74 Lacs |
Rate of Return (ROR): 23.00 |
|
Break Even Point (BEP): 63.00 |
TCI : Rs. 250 Lacs |
|
Cost of Project : 0 |
There are various uses of crushed stones, in rail road ballast, laying of roads, in concrete, plastering etc. The reduction of materials such as stone...
|
Capacity : 616 CUM/ Day |
Plant and Machinery cost: - |
|
Working Capital : - |
Rate of Return (ROR): 53.72 |
|
Break Even Point (BEP): 52.87 |
TCI : - |
|
Cost of Project : 0 |
Lime bonded fly ash bricks are the product of thermal power waste base products. There is no sophisticated machinery used in this production. There is...
|
Capacity : 20000 Nos. Bricks/Day |
Plant and Machinery cost: Rs. 12 Lakhs |
|
Working Capital : Rs. 1 Crore |
Rate of Return (ROR): 25.78 |
|
Break Even Point (BEP): 44.16 |
TCI : - |
|
Cost of Project : 0 |
There are different kinds of fasteners available in the mechanical workshop. Fasteners can be made by batch manual process and also by computerized au...
|
Capacity : 2.00 MT /Day |
Plant and Machinery cost: Rs. 22.00 Lakhs |
|
Working Capital : Rs. 372 Lakhs |
Rate of Return (ROR): 57.00 |
|
Break Even Point (BEP): 23.00 |
TCI : Rs. 440 Lakhs |
|
Cost of Project : 0 |